Material: BAMBOO Product Type: Storage Bamboo Baskets Regional Feature: Eco-friendly, light weight, easy to use and care Place of Origin: Vietnam Product name: Bamboo Basket Use: Storage for home decor
We are a supplier of used and new Heidelberg printing machine, parts and consumables globally , we acknowledge the demand of offset products and we want to fill that gap by bringing to the world the best affordable quality offset products.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Fruit juice press machine vegetable juice press machine ,different capacity from small to big , sanitary operating ,save labours ,high efficient ,save cost investment ! welcome order!
The hydraulic enema/ sausage machine is the main equipment for processing intestinal products, which can fill all kinds of large, medium and small intestinal products. The machine is driven by piston type hydraulic pressure. Under the action of the hydraulic cylinder, the materials in the cylinder will be squeezed out after the pressure is generated by adjusting the working pressure. The upper part of the machine is equipped with a storage hopper and butterfly valve, which can realize continuous filling without lifting the cover and improve the working efficiency
Belt press juicing machine for fruit vegetable Use for : 01.fruit juice 02.vegetable dehydration or juce 03.enzyme juice 04.Extraction of medicinal juice 1. High lift and large flow, strong pumping force, not easy to block, precision casting pump body, lasting work, high efficiency and energy saving, after-sales guarantee 2. Long service life. The product is equipped with a new automatic deviation correction and tension system, automatic operation, uniform distribution of materials, extended filter bag life, and long bearing service life 3. Rust-proof and corrosion-resistant, tough shell, stable operation, unique oblique lengthened wedge design, more stable operation and low noise 4. The treatment effect is good. Two sets of independent backwashing systems are adopted. The multi-roll diameter decreasing backlogs are compact in layout and the filter cake has high solid content. 5. Efficient, convenient and ultra-long gravity dewatering area, with large bearing capacity, strong processing capacity, low power consumption and low operating cost 6. Juice yield 85% Small capacity 500-3000kg/h,filter belt width 500-2000mm,power 1.5-3kw, filter belt speed 1.5-3.5m Big capacity 3-20T/hour,power 14.7-41kw ,machine size length 3100-5420mm Width 1475-3430mm high 1820-2420mm
Hummber type grinder corn peeling machine for different capacity ,can crush /grinder : sweet potato ,soybean, corn/maize ,sorghum . Agricultural machinery ,Agricultural machine /process machine ,welcome order ! Grain peeling machine, rice mill Can process :Corn peeling machine, sorghum peeling machine, coarse grain peeling machine, grinding wheel rice mill, millet processing machine, millet milling machine, wheat peeling machine, wheat kernel machine, mung bean peeling machine, peeling rice mill, soybean peeling machine, grain and soybean peeling machine, dehairing machine, Xanthium sibiricum pricking machine, peony flower seed peeling machine. Performance features: simple structure, good processing and installation technology, small volume, easy operation and use. Working principle: an iron screen is installed in the working room of the peeling machine, and a grinding wheel is installed in the screen to form a raw grain peeling gap between the screen and the grinding wheel. When working, the screen and the grinding wheel rotate reversely to remove the seed coat of the grain, and at the same time, the kernel and seed coat are separated by air separation, so as to greatly reduce the crushing rate and improve the peeling quality and yield more effectively. Usage: it is suitable for small and medium-sized grain and soybean processing plants and grain processing workshops to process the peeled rice of millet and sorghum, as well as corn, wheat, barley, mung bean, buckwheat, soybean and other cereals, as well as traditional Chinese medicine Kochia scoparia and job's tears. In particular, the hard shell and germ of corn are removed, which improves the edible taste of corn, The application range of corn is expanded, and the vairous corn food noodle processed by corn flour after peeling is very popular.
