1)Bituminous Coal Granular Activated Carbon Products are available in the following mesh sizes (specialised particle distributions are also available on request). Particle Size Lodine Number Moisture Content Ash Content Hardness Apparent Density Methyl Blue Floating rate 4x8, 6x12, 8x16, 8x18, 8x30, 10x20, 12x35, 12x40 850-1050 (mg/g)
Powder activated carbon produced by steam activation of wood. Wood Powder Activated carbon powder has an extraordinarily large internal surface area and pore volume that are responsible for its adsorptive properties. Powdered varieties of Activated Carbon are used in liquid phase application primarily for removal of undesired colour, smell and other impurities in many types of industries including basic drugs, glucose, sugar, and so on. Quite often, powdered carbon is washed with acid and then, repeatedly with water & dried to minimize impurities like soluble ash-iron, heavy metals etc.
Wood Based powder activated carbon is a fruit shell and sawdust as raw materials refined but become, the appearance of black fine powder, non-toxic, tasteless, has a large specific surface area, strong adsorption capacity, stable chemical performance, resistant to strong acid, alkali, can endure water, high temperature.Specific surface area is as high as 1000 ~ 1500 square metres per gram, belongs to the porous hydrophobic adsorbent.Applicable to the water quality of sugar, pharmaceutical, beverage, wine, water purification industry, decolorizing, refining, purification of organic solvent and wastewater treatment are also widely used. Wood Based powder activated carbon for water dissolved organic matter such as trihalomethanes, precursor and carbon tetrachloride, benzene, phenol chemicals have strong adsorption ability;The chroma, yixiu, bad breath, methylene blue surface active substance, herbicides, pesticides, pesticide, synthetic detergent, synthetic dyes, amine chemicals etc. Also use better removal effect;For mercury, aluminum, iron, nickel, zinc, cobalt, etc also have strong adsorption ability;But for the adsorption of ammonia nitrogen removal rate is low. Contact: Ms.Ella
Product name Wood based powdered activated carbon Standard pac mesh size - 200 mesh * other mesh size available as per customers requirement Base material Wood charcoal Activation agent Steam air Specifications Methylene blue adsorption Min 150 230 ml/g Apparent density Min 0.20 0.38 g/ml Ash content Max 10 % Moisture content Max 10 % Ph value 9 - 11 Particle size + 200 = max 10 % - 200 = min 90 % 500 kg
Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder. Mb Value : 140 to 320 Ash:7 to 12%
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Wood powdered activated carbon makes use of top quality sawdust as raw material and it is manufactured using the phosphoric acid technique. It has the characteristics of superior pore structure, sizable adsorption capability, and quick filtering. We offers wood based activated carbon powder for the sugar decolorization process. It also can be used for refining process of saccharin, glucose, xylitol.
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Appearance - Black Powder Particle size - 5-10 um Surface area - 2000 m2/g C content - >95%
