airmmax nano aeration tube 12mm*25mm. OD 25mm, ID 12mm, 100 meter per roll
Product Introduction An M20 thread interface metal filter tube is a type of filter tube made from titanium powder that has been sintered together into a porous structure. The sintering process involves heating the powder to a high temperature until the particles fuse together, creating a solid but porous material. The filter tube has a standard M20 thread interface, which means it can be easily attached to other components or equipment using a compatible M20 thread. The porous structure of the M20 thread interface metal filter tube provides excellent filtration capabilities. The filter tube can remove impurities from liquids and gases, including particles, bacteria, and other contaminants. The size of the particles that can be filtered out depends on the pore size of the filter tube, which can be customized to suit specific applications. Parameter Size: 20 50mm Pore size: 2um Interface: M20 1.5 Porosity: 35%
Parameters Name: 1 Micron Sintered Metal Porous Filter Tube Material: Titanium powder Filter Rating:0.5um-50um Porosity:30-45% Penetrability:3-800M M hKPa Working pressure:2.0MPa Operating temperature:300 Properties 1. Pore stability, uniformity of diameter, and good separation effectiveness. 2. High permeability, low filtration resistance, and high porosity. 3. Excellent chemical stability, resistance to corrosion from acids and alkalis, and resistance to oxidation 4. Morphological stability, 5. Strong mechanical characteristics, 6. Has potent antimicrobial properties and is inert to bacteria. 7. Online regeneration, simple cleanup, and extended service life. 8. Excellent biocompatibility; 9. Outstanding electromagnetic shielding capabilities. 10. Good shock absorption and dampening.
No.1 Introduction: Galvanized Spiral Gas Drainage Tube is adopted international advanced production equipments by our company. Its galvanized with the inner and outside. It includes jointing spiral tube and without-jointing spiral tube. It has the following advantages: smooth inner wall, little resistance, light in weight, corrosion-proof, long service life, low cost, etc, it is the ideal equipment of Gas Drainage Tube in coal mines. The jointing spiral tube is adopted cast steel flange connection, the automatic welding technics for the connection of tube body and flange. Comparing with riveting technics, the technics avoids the second scathe to the tube body, and also with better capability of gasproof. Due to the techniques of riveting with the misdistribution of joints, and the improper installation is easily leading to rips of tube. Aiming to the point, our company meets track with international technics and adopts integrated welding technics to avoid the existence problems of riveting. No.2 Usage: The product can be widely used in mine ventilation, gas drainage, and road and bridge construction, housing structure, discharging lampblack, draining contamination and basic equipment installation, etc. No.3 Product Advantages: ú¿1ú¬. Comparing with the traditional glass steel gas drainage tube and steel gas drainage tube, the mine-use galvanized spiral gas drainage tube has the following advantages: 1. Light of the pipeline in weight and easy to convey. 2. High-grade galvanized steel belts used and there is no use to consider of the burning blockage and electrostatic-proof problems. 3. Widely applicable diameter range from 80mm to 1600mm. 4. Spiral hinge mouth increases the loading power and pressure from the pipeline. 5. Inner wall of tube is smooth, little resistance and good circulation. 6. Galvanization prolongs service life. 7. Adopting cast steel flange connection, easily assembly and disassembly, with good interchangeability. (2) Advantages of Galvanized Spiral Tube for Air-conditioner: 1. Good match with other products and high standardization. 2. Good capability of airproof. 3. Low wastage of aeration. 4. Convenient project checking. 5. Pressure resistance is better than ordinary tube and rectangle tube. 6. Saving material. 7. Low cost installation. 8. Elegance of integrated overall arrangement. 9. Convenient daily maintenance.
offers high-quality stainless steel filter tubes made with metal powder such as 316L or 304 stainless steel. The sintered porous metal tube is produced through uniaxial compaction of powder in a rigid tool with the negative shape of the part and then sintered. Our sintered metal tubes can be customized to meet various applications and specifications. The tubes can be designed with different inner and outer diameters, heights, and apertures. Additionally, they can be designed for welding with stainless steel housings, making it easy to customize the diameter, aperture, thickness, alloys, and media grades. Parameters Material: Stainless steel Tube diameter: 0.5-500mm Wall thickness: 0.3-30mm Length: Customized Filtration rating: 0.5-100 microns Features High durability: Stainless steel filter tubes are highly resistant to corrosion and can withstand harsh operating conditions. Efficient filtration: The porous structure of stainless steel filter tubes allows for efficient filtration and separation of different materials, leading to high-quality and consistent results. High temperature resistance: Stainless steel filter tubes can withstand high temperatures, making them suitable for use in high-temperature applications. Easy to clean: Stainless steel filter tubes are easy to clean and maintain, allowing for long-term use and cost savings. Applications Water treatment: Stainless steel filter tubes are used in various water treatment applications, such as filtration, purification, and desalination. The tubes can effectively remove impurities and contaminants from water, leading to clean and safe drinking water. Oil and gas industry: Stainless steel filter tubes are used in the oil and gas industry for filtration and separation of oil, gas, and other fluids. The tubes can effectively remove impurities and contaminants from fluids, leading to improved performance and efficiency of equipment. Chemical industry: Stainless steel filter tubes are used in the chemical industry for filtration and separation of different chemicals and compounds. The tubes can effectively remove impurities and contaminants from chemical products, leading to high-quality and consistent results. Food and beverage industry: Stainless steel filter tubes are used in the food and beverage industry for filtration and separation of different products, such as juices, wines, and beers. The tubes can effectively remove impurities and contaminants from food and beverage products, leading to improved quality and taste. Stainless steel filter tubes are used in the for filtration and separation of different drugs and compounds. The tubes can effectively remove impurities and contaminants from leading to high-quality and safe products.
Supplier: Tpu car wraps, tpu screen protection film, tpu inflatable tube, tpu microporous aerator hose, tpu waterproof and breathable film etc
Buyer: Tubes for tent, car paint protection film,
in a transparent TPU particles as the backing material, produced by a special process, has the function of automatic adsorption foaming, good stability, excellent weather resistance and yellowing resistance, strong toughness, good wear resistance, ageing resistance, resistance to climate, environmental non-toxic, resistance to impact, scratch automatic repair function, etc., with can make the car paint after cut off from the air, the acid rain, anti-oxidation, resistance to scratch and persistent to protect the paint of the car.Paint protective film has excellent uv blocking function, can effectively improve the paint anti-uv aging ability, not to change color, yellow.After tearing off the paint, the protective film does not hurt the original car paint, no residual glue, to ensure the car paint as bright as new.Film light permeability, strong waterproof, high temperature resistance, scratch resistance, corrosion resistance, green environmental protection.
Sintered stainless steel fiber felt is a filtration medium made from extremely fine stainless steel fibers, which are micron-sized in diameter. The manufacturing process involves non-woven fabrication, lamination, and high-temperature sintering. This results in a finished felt with a gradient of different pore size layers, allowing for precise control of filtration accuracy and enhanced pollution absorption. The three-dimensional network structure, porous nature, high porosity, large surface area, and uniform pore size distribution of the sintered fiber felt enable continuous filtration performance. The sintered stainless steel fiber felt overcomes the drawbacks of metal mesh clogging and the fragility of powder filter products. It compensates for the limitations of fragile structures and low flow rates, which are common in filter paper and filter cloth materials. Moreover, it exhibits excellent heat resistance, compression resistance, corrosion resistance, and high filtration precision, making it an ideal choice for demanding applications. Specifications: - Material: Stainless steel fiber - Filtration rating: 99% - Filtration precision: 5-60 microns - Dimensions: 300x300mm - Thickness: 0.4mm, 0.8mm, 1.0mm - Porosity: 70% - 80% Features: 1. Low-pressure drop: The high porosity of our sintered metal fiber filtration media ensures minimal pressure drop, resulting in energy cost savings even at high filtration rates. 2. Easy to clean: The open structure of the stainless steel fiber porous media allows for easy backflushing or backpulsing, minimizing downtime and optimizing process efficiency. 3. High strength: The sintering process creates strong fiber bonding, ensuring a durable filtration medium capable of withstanding thermal shock, high pressure, and frequent backflushing when paired with appropriate core materials. 4. Heat and corrosion resistance: Our stainless steel fiber filter medium can withstand high temperatures (up to 1000°C, depending on the alloy) and corrosive environments.
Sintered titanium filters are manufactured using 99.6+ % pure titanium powders. Depending on the desired filter morphology, the powders are compressed through isostatic pressing, uniaxial pressing, or roll-compacting. The resulting green body is then subjected to sintering in a furnace to produce the final sintered filter. The titanium rod filter element utilizes corrosion-resistant titanium rods, making it highly resistant to high temperatures and impacts. It is non-toxic, does not shed particles or adsorb liquid components, and offers a long service life (typically 4-5 years). The titanium rod filter element is easy to clean and renewable. It employs deep filtration, forming a dense filter layer with gaps on the surface of the titanium rod, effectively filtering particles. Additionally, particles smaller than the pore size of the titanium rod can be tightly captured on the channel walls, enhancing the filtration accuracy. The titanium rod filter shell is constructed from high-quality 316L or 304 stainless steel, featuring a mirror-polished interior and exterior. Specifications: Diameter: �¤60mm Length: 1000mm Filtering accuracy: 100�¼m Interface type: M30 interface (can be made as required) Technic: Sintering Filtration Principle When the filter medium enters the filter cartridge through the liquid inlet, impurities are initially trapped by the surface of the titanium rod, forming a dense filter layer. This filter cake layer contributes to the filtration process. Simultaneously, particles smaller than the diameter of the titanium rod's pores enter the micropores on the rod walls. The intricate and circuitous nature of these curved and slender pores, combined with fluid flow-induced extrusion and collision, facilitates effective particle capture. This deep filtration occurs within the titanium rod, as impurities are intercepted on its outer surface and inner wall. The filtered material exits through the outlet. As impurities accumulate within the filter cartridge, the pressure increases. Regeneration of the filter titanium rod is required once the pressure reaches 0.3MPa. Features of Titanium Filter Cartridge: Compacted pre-graded Titanium powder: Sintered metal filters are constructed using precisely graded titanium powder. This powder undergoes compaction and sintering, a high-heat process that bonds the particles without melting them. The result is a robust, porous metal structure with exceptional strength and filtration performance. Welded end-caps prevent filtrate bypass: Titanium filters feature integrally welded end-caps, eliminating the risk of filtrate bypass. This ensures that all fluid passes through the filter media, maximizing filtration efficiency and preventing contamination of the filtrate. This leak-proof design is essential for maintaining process integrity and achieving reliable results.