Details about Hand-Push Airless Road Marking Machine PISTON TYPE HIGH PRESSURE PAINT PUMP 9 L/min super-alloy piston pumps, large flow, stable pressure, painting pressure can be adjusted in the range of 0-25Mpa to meet the different requirement for the line thickness and width. AUTOMATIC RECIPROCATING HYDRAULIC CYLINDER The perfect combination of variable displacement pump and automatic reciprocating hydraulic cylinder, reduces the complex electronic controlling system, supports stable, continuous and durable driving force. NEW TYPE HYDRAULIC COOLING SYSTEM Large capacity hydraulic cylinder, new type cooling fan and radiator keeps the hydraulic system cooled in the continuous process of working, improves the life time of hydraulic system. DOUBLE SPRAYING GUNS Zebra line marking could be done one time, also can be used for spraying road edge stone through adjusting angle of spraying gun. COMFORTABLE OPERATING EXPERIENCE Adopt more special designs such as ergonomic controlling handle design, special open and close controlling mode of spray gun, multiple adjustment spraying gun holder and front lockable steel wheel, etc. DURABLE SURFACE TREATMENT Surface of whole machine adopts the high level of electrophoresis coating or composite electroplating treatment, have very excellent performance of anti-corrosion and anti-rust. MORE OPTIONAL CONFIGURATION TO CHOOSE Personalized configuration such as glass beads spraying system, dot line automatic controlling system, etc is available to be selected according to your real requirement. Technical Data: Engine:5.5HP Honda gasoline engine Marking method:High pressure airless spraying Paint pump flow:9L/min Rated maximum working pressure:20Mpa Paint pump and control mode:Piston reciprocating, single pump Applicable paint:Cold-solvent, water-based and other single-component paint Marking width:100-600mm adjustable Spray gun quantity:2 manual fixed spray gun Dimension:1780x980x1200mm Weigh:150Kg
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Glass beads-JGB GBT-has been selected and classified based on the refraction, reflection, roundness and the ratio of uniform of the beads. JGB GBT, the beads size is fine, is used in the normal road marking reflection paint that requested the thin and fine paint layer. JGB GBT meets the standard GB/T24722:2009 #1. Excellent for road marking, specially to improve the visibility at night. ***JGB GBT: External: transparent, clean, no bubble, no impurity Roundness: 80% Refraction index: 1.50
Glass beads for road marking paint for roads, parkings, airport run ways and a lot more
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
Glass beads for road marking 1.Improve the road marking line contrary reflection function. When driving at night, the lamp shines on the marking line with glass bead in it, the ray of lamp is reflected back parallely. So the driver can look at the road clearly and drive safely at night. 2. Products according to international standard include: jt/t 446-2001, english bs6008, korean, ks and american aashto etc. 3. You can choose different size glass bead between 50um-1180um according to different function. 25kg/bags, 40bags/pallet, using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp.The net weight of each bag is 25f+0.2kg.
Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.
Details: 1.Place of original: CHINA 2.Material: Glass 3.Proportion: : 2.5g/m3 4.Bulk density: 1.5g/m3 5.Mohs hardness: 6-7 6.Rockwell hardness: 46HRC 7.Usage: Road-marking glass;Sandblasting ; Weighted Blanket, toy filling. 8.Reflective: 1.5-1.7 9.Packages: 25kg PPbag, 1MT Jumbo bag, pallet, 25kg paper bag or as customer's requirement. 10.Certificate: ISO9001, 11.Sample: free 12.MOQ: 1ton 13.Color: Transparent
Our products win the good reputation in the international market for the superior quality and competitive price. Reflective glass beads for road marking is one of most popular products, all types are available in our company, such as BS6088A/B, EN1423 /EN1424, AASHTO M247 type1/2/3, KSL2521 No.1/2, JIS R3301, etc. And also we can produce the glass beads according to the client's specification.
