General Features Size Universal Colour White Packaging 20 masks per box Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 94 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Folded Design You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks Valved The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles nbsp Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto
We offer all types of FFP2 face masks. Our FFP2 filtering half masks are manufactured in accordance with regulation (EU) 2016/425 of the European Parliament and of the council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC and EN 149:2001+A1:2009 Respiratory protective devices Filtering half masks to protect against particlesâ??Requirements, testing, marking. The masks are non-reusable particle filtering half masks and intended exclusively for personal protection. FFP2 cup type filtering half masks are designed and produced to protect against both solid and liquid aerosols, which can be only used in the general working environment. The mask cannot be used under the following environment(s): - Do not use inflammable or explosive environment; - Do not use for respiratory protection against atmospheric contaminants/concentrations which are unknown or immediately dangerous to life and health.
1. Five layers of protection. 2. With breathing valve. 3. The first layer: 50 grams of non-woven fabric, the second layer: 25 grams of hot air cotton; the third layer: 25 grams of 99% melt-blown fabric; the fourth layer: 25 grams of 99% melt-blown fabric; The fifth layer: 25 grams of non-woven fabric. 4. Optional internal and external nose bridge. 5. Complete export qualifications, with CE, FDA, ISO certificates. 6. Ministry of Commerce White List.
Product name : FFP2 Respirator mask (No Valve) Product specification : FFP2 Respirator mask Without Valve Price on request Origin : China Certification : CE Production capacity : 5 million per week MOQ : 100,000 Pcs
Product name : FFP2 Respirator mask (With Valve) Product specification : FFP2 Respirator mask With Valve Price : Pricing on ask Origin ; China Certification : CE Production capacity : 5 million per week MOQ : 100,000
KN95 mask with valve CE and FDA approved FFP2 5 layers box of 20
FFP2 Vertical-Flat Valved Respirator Face Mask CE certified by CCQS Ireland (NB no. 2834) Tested and certified according to EN 149:2001+A1:2009 Module Type of Certification: Module B + Module C2 Class: FFP2 This respirator mask is certified and classified as FFP2 under EU standard EN 149:2001+A1:2009. EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles. This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance. EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols. FFP2 masks have a minimum of 94% filtration percentage and maximum 8% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.
-Disposable ffp2 mask with valved respirator that increases the airflow. -Meets EU standards. -Certificated with CE, FFP2, ISO 9001. -High quality and comfortable. -Dual straps. -Adjustable aluminium nose piece. -Nose foam inside. -Latex free.
1. Five layers of protection. 2. Without breathing valve. 3. The first layer: 50 grams of non-woven fabric, the second layer: 25 grams of hot air cotton; the third layer: 25 grams of 99% melt-blown fabric; the fourth layer: 25 grams of 99% melt-blown fabric; The fifth layer: 25 grams of non-woven fabric. 4. Optional internal and external nose bridge. 5. Complete export qualifications, with CE, FDA, ISO certificates. 6. Ministry of Commerce White List.
- Country of origin China - Material: protective mask 4Ply, middle layer. wit meltblown fabric - price per piece 1.9 USD ordering up to 06/04/2020 - MOQ from 100 000 - CE Certificate EN 149:2001 + A1:2009 - payment terms prepayment - delivery term CPT By air, 3-5 days - packaging information 1 pc per polybag, 50 pics per box - carton size (length x height x width) 67.5*51*31cm - carton weight 10 kg - pieces per carton 20boxes/carton (1000pcs)
