Rail Thermit Welding Thermite welding is a track connection construction process with mature technology, simple, convenient, fast, and high-quality construction.Rail thermite welding is the thermite flux composed of aluminum powder, iron oxide and other metal additives in a special crucible, and a high temperature match is used to ignite the thermite reaction. During the reaction, a large amount of heat is released and the molten alloy mixture reacts to form.Because of its high density, molten steel sinks below, the slag generated by the reaction is relatively light and floats on the upper part, and the molten steel is filled with sand in a short time.At the same time, the aluminum hot molten steel itself acts as a filler metal, crystallizes and cools together with the molten steel rail, and the two steel rails form a whole.
Rail Thermit Welding Thermite welding is a track connection construction process with mature technology, simple, convenient, fast, and high-quality construction.Rail thermite welding is the thermite flux composed of aluminum powder, iron oxide and other metal additives in a special crucible, and a high temperature match is used to ignite the thermite reaction. During the reaction, a large amount of heat is released and the molten alloy mixture reacts to form.Because of its high density, molten steel sinks below, the slag generated by the reaction is relatively light and floats on the upper part, and the molten steel is filled with sand in a short time.At the same time, the aluminum hot molten steel itself acts as a filler metal, crystallizes and cools together with the molten steel rail, and the two steel rails form a whole.
Delivering 100% client satisfaction is our foremost objective. We are offering quality range, protected from moisture free & safe packaging and timely deliveries for the client at market leading prices. Our trained chemists, technician and other skilled staff are committed to make available the best spark welding electrodes. One box containing 12 packed.(one box 30kg & 1pkt 2.5kg)
Welding wire-ingot-hot rolled material-cold drawn material-Dalian Yongbao New Material Technology Co., Ltd founded in1999, it covers an area of 20,000m², construction area is 12,000m², a private enterprise which set smelting, electroslag remelting, forging, steel rolling. Our company produces high speed tool steel, die steel, stainless steel, precision alloy, high temperature alloy, corrosion resistant alloy, welding strip, welding wire, ingot, forging, hot rolled material, cold drawn material and cobalt series (M42, M35, etc.) tungsten series (W18, W6, W9, W4, M2Al, etc.) die steel (4Cr5MoSiV1-H13Cr12M1V1, CR) 12MOV, etc.) we developed various special shaped products of HSS, widely used in sawing products, high-end wood planer blades, automotive blades, air conditioning sliders, sewing machine blades and other fields, has grown into our core products. China tool steel, China high speed steel. The company has 12 product invention patents, 4 utility model patents, 9 mold steel, tool steel production line software copyright patents, and passed the ISO-9001 international system certification in 2009.
Submerged arc welding welding flux lj-sj501 sintered flux Lj-sj501 welding flux aws a 5.17 f6a0-el12 soldering flux f7a2-em12k Flux type: aluminum-rutile Basicity index: 0.5-0.8 Remark: 1.Before welding, fluxes should be baked for two hours at 300-350ºc. 2.Removal of rust, oil, dirt, water, impurities, etc in welding areas. Packing: 25kg/bag, pallets are available. Lead time: 2 weeks Performance: vrey good weld bead appearance, excellent slag removal with narrow groove and fillet welds. High resistance to cracking and porosity and insensitive to oil, rust, scale and dirt on the surface to be welded. Applications: used for ordinary carbon steel, low alloy structure and boiler quality steel and high speed welding. Contact: miss helen duan Tel/fax: 0086-532-85641729 25kg/bag
Submerged arc welding welding flux lj-sj501 sintered flux Lj-sj501 welding flux aws a 5.17 f6a0-el12 soldering flux f7a2-em12k Flux type: aluminum-rutile Basicity index: 0.5-0.8 Remark: 1.Before welding, fluxes should be baked for two hours at 300-350ºc. 2.Removal of rust, oil, dirt, water, impurities, etc in welding areas. Packing: 25kg/bag, pallets are available. Lead time: 2 weeks Performance: vrey good weld bead appearance, excellent slag removal with narrow groove and fillet welds. High resistance to cracking and porosity and insensitive to oil, rust, scale and dirt on the surface to be welded. Applications: used for ordinary carbon steel, low alloy structure and boiler quality steel and high speed welding. Contact: miss helen duan Tel/fax: 0086-532-85641729 Packing: 25kg/bag, pallets are available.
E71T-1 is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70,000 psi tensile strength and good notch toughness is required. It is an excellent general purpose welding wire. This wire has very low fume, stable arc, good slag removal and excellent mechanical properties. AWS Specification: AWS A5.20 AWS Classification: E71T-1 Typical Applications: Buff and fillet welding of hulls and storage tanks Structural steel Farm machinery Construction equipment General carbon steel fabrication Welding Current: DCEP (Electrode Positive, Reverse Polarity) Typical Wire Chemistry: (as welded with 100% CO2 shielding gas): 100% CO2 75%Ar/25%CO2 C: 0.05 0.05 Si: 0.56 0.64 Mn: 1.39 1.61 P: 0.008 0.005 S: 0.014 0.01 Welding Positions: All Positions Available Diameters: 0.8mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm Available Spools: plastic spool and metal basket Available Weight per Unit: 0.9kg, 1kg, 5kg 15kg
Typical Applications: Typical Wire Chemistry: C: 0.09 Mn: 0.98 Si: 0.59 P: 0.01 S: 0.012 Welding Positions: Typical Mechanical Properties (As Welded): Yield Strength, Mpa: ¡Ý420 Tensile Strength, Mpa: ¡Ý510 % Elongation: ¡Ý22 Available Weight per Unit: 0.9kg, 1kg, 5kg, 12.5kg, 15kg, 20kg, 27kg, 250kg and 350kg. Available Spools: plastic spool and metal basket Available Diameters: 0.6mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm
Welding electrodee7018 is a low-hydrogen iron powder type electrode that produces high quality x-ray welds. It can be used in all positions on ac or dc reverse polarity welding current. E7018 is recommended for welding medium grade carbon steels, where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional electrodes. Typical applications: Low-alloy structures Low, medium, and high-carbon steels Offshore rigs and power plants Steel structures Tack welds for tubular wire applications Aws specification: aws a5.1 Aws classification: e7018 Welding current: ac íºc dc en (electrode negative) Typical wire chemistry: C: 0.071 Mn: 1.42 Si: 0.53 P: 0.014 Typical mechanical properties: Yield strength, mpa: ¡Ý420 Tensile strength, mpa: ¡Ý510 % elongation: 30 Welding positions: all positions Available diameters: 2.5mm, 3.2mm, 4.0mm & 5.0mm Available packing: small box and carton box
Product Name: Welding Detailed product parameter description: Product model: Welding Our company has multiple DC welding machines, AC welding machines and argon arc welding machines, which can weld various steel structures, steel processed parts, and perform high-quality welding of various stainless steels, high-alloy steels, and non-ferrous metals. We welcome supplied materials for processing.
