MATERIAL DESCRPTION The Areca palm (Areca Catechu Linn), is extensively cultivated in South India as a cash crop, gives a strong and supple material that is amenable to various shaping. This product is obtained from the plant leaf part, which in the course of its biological life cycle, dries, falls and degenerates. The naturally shed leaf sheath is strong, odorless, water and heat resistant. Areca palm leaf sheath has its own natural grains and characteristic texture, very much similar to those seen in furniture grade wood. The outer surface of the sheath is greenish or brown, waxy and tough, while the inner surface is creamy in color and has natural grains and glossy finish. An added advantage with this material is that it can be used to bake foodstuff and can even tolerate microwave cooking. With such amazing properties, this raw material has been used to manufacture a variety of items of day-to-day use such as disposable plates. The entire manufacturing process uses no chemicals, resins, and dyes, strengthening agents or synthetic materials whatsoever. Areca palm leaf plates are totally safe and non toxic. PRODUCTION PROCESS 1. Freshly fallen, naturally discarded sheath leaves of the Areca palm tree are collected. These leaves / sheaths are neither pulled off the tree nor are any trees cut down, as this is a non-timber forest resource. The trees naturally shed their old leaves, which are then picked up and put into good use. 2. Each raw sheath is then thoroughly washed with pressure water jets to remove any clinging dirt. It is then hand washed in pure water. The leaves are then rinsed third time in fresh water. 3. Once clean, the palm sheaths are allowed to air dry. 4. The clean & dry palm leaves are then molded into various shapes using heated press. Multiple plates of different shapes and sizes are often cut from each leaf in order to reduce waste. 5. Once pressed into shape, each plate is further cleaned with air jet to remove any dust produced in the cutting process. 6. Cleaned plates are packed in 25 pieces / unit and shrink wrapped. 7. The adhesive label with the description of product is sticked to each unit. 8. Conveniently dried and stored in dry place. 9. Shelflife is more than 8 years , if kept under normal room temperature. Additional feature s. 1. Suitable for hot /cold dishes, gravy, curry etc 2. Safe to use in microwave oven 3. Can withstand temperature up to 120*C 4. Suitable for refrigerator use 5. Gets fully decomposed in soil within 30 to 45 days.
The Areca palm (Areca Catechu Linn), is extensively cultivated in South India as a cash crop, gives a strong and supple material that is amenable to various shaping. This product is obtained from the plant leaf part, which in the course of its biological life cycle, dries, falls and degenerates. The naturally shed leaf sheath is strong, odorless, water and heat resistant. Areca palm leaf sheath has its own natural grains and characteristic texture, very much similar to those seen in furniture grade wood. The outer surface of the sheath is greenish or b rown, waxy and tough, while the inner surface is creamy in color and has natural grains and glossy finish. An added advantage with this material is that it can be used to bake foodstuff and can even tolerate microwave cooking. With such amazing properties, this raw material has been used to manufacture a variety of items of day-to-day use such as disposable plates. The entire manufacturing process uses no chemicals, resins, and dyes, strengthening agents or synthetic materials whatsoever. Areca palm leaf plates are totally safe and non toxic. How Areca palm leaf plates are made Freshly fallen, naturally discarded sheath leaves of the Areca palm tree are collected. These leaves / sheaths are neither pulled off the tree nor are any trees cut down, as this is a non-timber forest resource. The trees naturally shed their old leaves, which are then picked up and put into good use. Each raw sheath is then thoroughly washed with pressure water jets to remove any clinging dirt. It is then hand washed in pure water. The leaves are then rinsed third time in fresh water. Once clean, the palm sheaths are allowed to air dry. The clean & dry palm leaves are then molded into various shapes using heated press. Multiple plates of different shapes and sizes are often cut from each leaf in order to reduce waste. Once pressed into shape, each plate is further cleaned with air jet to remove any dust produced in the cutting process. Cleaned plates are packed in 25 pieces units and shrink wrapped. Further packed into corrugated carton box as per customer packing requirement. Additional Features Suitable for hot /cold dishes, gravy, curry etc Microwave oven friendly. Withstand temperature up to 120*C Suitable for refrigerator use. Gets fully decomposed in soil within 30 to 45 days and acts as organic manure.
The Areca palm (Areca Catechu Linn), is extensively cultivated in South India as a cash crop, gives a strong and supple material that is amenable to various shaping. This product is obtained from the plant leaf part, which in the course of its biological life cycle, dries, falls and degenerates. The naturally shed leaf sheath is strong, odorless, water and heat resistant. Areca palm leaf sheath has its own natural grains and characteristic texture, very much similar to those seen in furniture grade wood. The outer surface of the sheath is greenish or brown, waxy and tough, while the inner surface is creamy in color and has natural grains and glossy finish. An added advantage with this material is that it can be used to bake foodstuff and can even tolerate microwave cooking. With such amazing properties, this raw material has been used to manufacture a variety of items of day-to-day use such as disposable plates. The entire manufacturing process uses no chemicals, resins, and dyes, strengthening agents or synthetic materials whatsoever. Areca palm leaf plates are totally safe and non toxic. How Areca palm leaf plates are made? Freshly fallen, naturally discarded sheath leaves of the Areca palm tree are collected. These leaves / sheaths are neither pulled off the tree nor are any trees cut down, as this is a non-timber forest resource. The trees naturally shed their old leaves, which are then picked up and put into good use. Each raw sheath is then thoroughly washed with pressure water jets to remove any clinging dirt. It is then hand washed in pure water. The leaves are then rinsed third time in fresh water. Once clean, the palm sheaths are allowed to air dry. The clean & dry palm leaves are then molded into various shapes using heated press. Multiple plates of different shapes and sizes are often cut from each leaf in order to reduce waste. Once pressed into shape, each plate is further cleaned with air jet to remove any dust produced in the cutting process. Cleaned plates are packed in 25 pieces units and shrink wrapped. Further packed into corrugated carton box as per customer packing requirement. Additional Features Suitable for hot /cold dishes, gravy, curry etc Microwave oven friendly. Withstand temperature up to 120*C Suitable for refrigerator use. Gets fully decomposed in soil within 30 to 45 days and acts as organic manure.
Areca Leaf Plates and Bowls : Your Eco-friendly Partner Areca plates are crafted from the leaf sheaths of the Areca Palm tree also known as Betel Nut tree which are abundantly available and cultivated in India! A handsome, single-stemmed tropical palm with broad, glossy green feather-shaped leaves protruding from a green crown-shaft and having a narrow, upright habit. The stem is solitary, slender and prominently marked with annulated scars of fallen fronds; its diameter varies from 40-50 cm. The leaves are collected, pressure washed to remove dirt and debris, sun dried for preservation, then molded into their plate or bowl form using heat and pressure. These sustainable plates and bowls provide an eco-friendly alternative to traditional disposable materials. - 100% biodegradable and compostable. - Eco-friendly and disposable. - A perfect substitute for plastic and paper-based products. - Hygienically prepared without the use of harmful chemicals. - No trees are being cut down. Dry leaves are a natural occurrence that fall from trees. - Suitable for Dry and Liquid foods that may be eatable hot or cold. All shown photos and images are for sample reference purposes. We are with many more designs and varieties for all categories. Your valuable inquiries will be fulfilled with all designs and specifications!
Areca Leaf Plate
Areca plates, also known as betel nut plates or palm leaf plates, are eco-friendly disposable plates made from the dried and fallen leaves of the Areca palm tree, native to India and other tropical regions. These plates come in various sizes, typically ranging from 4 inches to 12 inches in diameter, catering to different serving needs. In terms of quality, Areca plates are valued for their natural and biodegradable properties, making them an environmentally sustainable alternative to plastic or styrofoam plates. They are lightweight yet sturdy, suitable for serving both hot and cold food items. The texture of Areca plates varies depending on the manufacturing process and the specific leaves used, but they generally have a smooth surface suitable for serving food. These plates are popular for various occasions, including parties, weddings, picnics, and other events where disposable tableware is needed. They are appreciated not only for their eco-friendliness but also for their rustic and natural aesthetic, adding a touch of elegance to any dining setting. Overall, Areca plates offer a convenient, sustainable, and eco-friendly solution for disposable tableware needs. Size: 4 inches to 12 inches in diameter Country of Origin: India Grade Standard: Thickness, Texture, Finish, Eco-Friendly Packaging Type: Paper Box, Plastic Packet Shelf Life: 12 Months Packing: Customizable Certifications: SPICE BOARD / G.S.T. / I.E.C./ MSME MOQ: 1000 Nos. Binomial Name: Areca catechu Family : HS Code 4602.10.00 / 46021919, 46021990 Indian origin export-quality areca plates are eco-friendly disposable plates made from the dried leaves of the areca palm tree, scientifically known as Areca catechu. These plates are gaining popularity globally as a sustainable alternative to traditional disposable tableware due to their natural, biodegradable, and compostable properties.
It's a product of natural Areca palm leafs. Additional Informations and Specifications: Shape:Square Size:5X5 inch Bowl Depth:5CM Color:natural palm leaf color Material:Areca palm leaf use and Applications: Event and parties.
Product Name :- ARECA PALM LEAF PLATES Quality : Premium Quality Material :- Areca Leaf Shape :- All Shape's are Available, As per Buyer's Requirements Size :- All Size Available , As per Buyer's Requirements Thickness :- 3 to 7 mm. Supplying Capicity :- 100000
Specification: - Original: Vietnam - Material: Areca leaf, palm leaf - Usage: for food - Function: Eco3-friendly Packaging: in PP bag of 25/50kgs, a carton of 10kgs or plastic box of 500g, following buyerâ??s will. 1*40â??fcl = 8mts. Price: please revert to us Payment & delivery: 100% L/C at sight or T/T in advance 40%, negotiable.
It is Biodegradable disposable Products.it is made from fallen leaves. no trees were harm manufacture the products. It is Natural and Attractive product which makes it Stylish and Unique. It is Organic & Eco-friendly. There are no chemical used in any of the process. It is Dinnerware It can be used in microwave for warming food. Exporter/supplier - Nish International (India)
