Meltblown non-woven fabric for medical masks
About Meltblown Nonwove Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
[Product Information] 1. Dissolved non-woven mask filter - 100% polypropylene - White. - 0.1 to 0.3 micron - 20 to 50 gsm. - TSI8130 paraffin oil, TSI8130 NaCl (0.1 - 0.4 micron) - Roll. - Foundation (210-260mm) 2. Spunbond non-woven fabric - 100% polypropylene - White. - 10 to 60 gsm. - Roll (100mm to 2400mm) - Foundation (210-260mm) [Product Rating] Separation/MB / Basic Weight (g/m2) / Filtering Efficiency (%) / Pressure Loss / Test Method(mmAq) BFE 95 20 85 2.2 NaCl, 32l/min BFE99 22 90 2.5 NaCl, 32l/min N95 25 95 11.0 NaCl, 85l/min N99 25 99 13.0 NaCl, 85l/min Repeater(Vibration Level 1) , P2 35 94 15.0/12.0 paraffin, 95 l/min Repeater(Vibration Level 2) , P1 30 80 13.0 paraffin, 95 l/min KF94 40 94 14.0 paraffin oil, 95 liters/min KF80 30 80 12.0 paraffin oil, 95 liters/min Instrument: TSI 8130, Particle size: 0.3 micron Applications: 1. Filter material Gas filter: medical masks, room air conditioners filter material Liquid filter: beverage filtration, water filtration 2. Medical & Health Material Surgical Mask: inner and outer layers with spunbond material, in the middle is melt blown fabric. 3. Environmental protection material (oil absorbent material) Meltblown nonwovens used mainly PP material. It can absorb 17-20 times bigger than its own weight of oil, in environmental protection, you can make absorption felt, oil filter, etc., are widely used in marine oil spill, plant equipment ,sewage treatment and so on. 4.Clothing Materials meltblown nonwovens by the microfiber into a net, so its very soft feel. And the fabric of small aperture, high porosity, with very good wind resistance and good air permeability, light weight, is currently doing the best material for clothing insulation materials.
Technics: Nonwoven Supply Type: In-Stock Items Material: 100% Polypropylene, 100% Prolypropylene Nonwoven Technics: Melt-Blown Pattern: Stripes Style: Plain Width: 43/44" Feature: Waterproof, Breathable, Anti-Static, Anti-Bacteria, Anti-Pull, Tear-Resistant, Fusible, Shrink-Resistant, Sheer, stain Resistant, Stretch, Water Resistant, QUICK-DRY, Wrinkle Resistant, wind proof Use: Home Textile, Hospital, Agriculture, Hygiene, Garment, Industry, Lining, Accessories, Costumes Weight: 25gram Place of Origin: Jiangsu, China Brand Name: Perfectseal Model Number: PFT-METL BLOWN Product name: Meltblown Nonwoven Fabric Application: Facial Mask Name: 100% PolyPROPYLENE Spunbonded Nonwoven Fabric MOQ: 1 Ton/color Colors: OEM Color Color: White Sample: Freely Advantage: Competitive Size: Custom Size Accepted
We are Please to offer 100% MeltBlown Non-Woven Fabrics to be used for Mask production on prior Booking. GSM : 18 to 40. Color : White. Width : 175mm/177mm/260mm/265mm. Discounts depend on Quantity & Payment terms . Please contact us for further discussion.
Meltblown nonwoven fabric for FFP2 face masks or medicial protective clothing. Material: Polypropylene Weight (GSM): 25g Width (CM): 175cm , 260cm or customized (1.6m) Roll Length (M): 1000 Meter or customized Color: White Packing: Inner protective wrap & sealed with plastic bag or customiszed Filter Efficiency: BFE99, PFE95, Paraffin Oil 95% Minimum Order: 500kg Production Capacity: 1500kg-3000kg/day Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples Non-toxic, Biodegradable, less odour. Soft, Smooth, Stretchable, Excellent Breathability.
Meltblown nonwoven fabric for FFP2 face masks or medicial protective cloth. Material: Polypropylene Weight (GSM): 25g Width (CM): 175cm , 260cm or customized (1.6m) Roll Length (M): 1000 Meter or customized Color: White Packing: Inner protective wrap & sealed with plastic bag or customiszed Filter Efficiency: BFE99, PFE95 (Paraffin Oil 95%+ if required) Minimum Order: 500kg Production Capacity: 1500kg/day Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples Non-toxic, Biodegradable, less odour. Soft, Smooth, Stretchable, Excellent Breathability.
About Meltblown Nonwoven â?¢ Melt blown is a one step process to make fabrics from polymer. â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid. â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: â?¢ Adjustable Pores And Capillary Structure â?¢ Excellent barrier properties â?¢ Filament size 1 -3 �µm â?¢ High Elasticity â?¢ High Filtration capability â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). â?¢ Large Area-to-weight ratio â?¢ Self-bonding â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. â?¢ Very good thermal insulation for apparel application â?¢ Weak tensile properties â?¢ Wicking Properties Application of spun-bond nonwoven fabrics: â?¢ Sanitary and Hygiene: â?¢ Sanitary napkins, â?¢ Baby diapers and â?¢ Incontinence diapers â?¢ Medical and Surgical: â?¢ Gowns, â?¢ Face masks, â?¢ Caps, â?¢ Drapes, etc â?¢ Other Miscellaneous Applications: â?¢ Filtration Material, â?¢ Agriculture, â?¢ Oilsorbents â?¢ Hot-melt adhesives â?¢ Headliners, etc
Item : PP melt blown nonwoven fabric Material : 100% polypropylene Nonwoven technics : Melt blown Width : Can be cut into 17.5cm Or according client Request. Basic Weight : 10-20-25-200gsm Feature : Eco-Friendly, Anti-Pull,Non-toxic, Anti-bacterial, Recyclable, etc Applicastions : Respiratory & Disposable Mask, etc Certifications : SGS, FDA,ROHS BFE : 99%
Buy Non-Woven Fabric Meltblown Meltblown filter Polypropylene Meltblown nonwoven fabric This fabric is made of Polypropylene * The nonwoven can be used in mask or air filter. * high oil absorbility. * high air permeability, low air pressure. 1. Applied to different standars(BFE/FFP/N..) 2. Clean recycled & eco-friendly 3. Enka Technica Smart 4. 15 Tons a day 5. ISO manufacturer Product Type: Polypropylene melt-blown nonwovens Material: Polypropylene Fabric Type: round HOTechnics: melt blown Feature: Eco-Friendly, Other Package: Warpping film Color: white Width: According to order Composition: 100% Polypropylene Basis weight: 6-400gsm Roll width: 4"--126" Color: natural color special treatment add high static Certification: Nelson test Applications: Air filtration material ,Dustproof masks materialm,medical mask material,Calendered wipe and oil absorbent material.
