Breathe easy with our 360-degree 5-layer meltblown filtration infused with eucalyptus oils purifying and clearing airwaves.
Block harmful UV Rays and prevent heat build-up from the sun with our auto-shading material (optional).
Made from a combination of food grade silicone and Polycarbonate, Saturn is the ultimate mask for todayâ??s environmental challenges.
N99+ filtration arresting most airborne contaminants and pollutants, stopping viruses and bacteria dead in their tracks before they make their way into your respiratory system.
Adjustable food grade silicone straps for comfort and prolonged use.
Price shown is RRP, bulk order prices vary with quantity ordered.
CE, FDA, ISO 2015/2016, SGS, GB2626 Certified, Patented, Reusable Mask, Interchangeable Filters, Highest Protection, The Future of Protection
MX888 Saturn, a new level of protection, the worldâ??s first transparent face mask with interchangeable filters. A futuristic designed mask with exquisite features, it is not just sleek & attractive visually, the MX888 Saturn is the ultimate mask equipped with features beyond belief.
The MX888 Saturn is reusable only replacing the mask on average once per year, the MX888 Saturn is 100% recyclable/bio-degradable.
Another feature is the transparent design, ensuring the face is visible at all times, providing confidence to the people as they can see who they are interacting with, the hearing impaired can communicate efficiently as they rely on reading mouths to communicate, you can even unlock your smartphone with face recognition whilst wearing the MX888 Saturn.
Our 360-degree 5-layer one-piece melt blown filter offers the ultimate protection.
Please refer to our GB2626 Filter test for detailed performance statistics.
Another feature is that the MX888 Saturn has interchangeable filters, the interchangeable filters allow the mask to be reusable, simply throw away the used filter after 3-7 days & replace with another.
The MX888 Saturn mask is reusable, meaning simply wash the mask replace & the filter, continuously reuse the same mask over and over. It is recommended to recycle the MX888 Saturn after approximately 12 months of usage.
Anti-Fog coating has been implemented into the MX888 Saturn, which has been embedded permanently into the mask, No anti-fog spray required.
Comfort & convenience is another important factor, with food grade & medical grade silicone, this mask is designed to mould to each face & seal very well with no leaks. The mask is extremely comfortable and will not irritate a sensitive face, adjustable ear straps will allow you to customize the fitment of the mask to your desired tension, easy cleaning with alcohol wipes or with warm water, medium & large size masks offered will suit majority of face profiles.
The MX888 Saturn is currently certified with the following certificates;
CE Compliance, FDA Certified, SGS/ISO 2015/2016 Cert, GB2626.
The MX888 Saturn is approved & registered as a class 1 medical device globally, allowing this mask to be used in hospitals around the world.
The MX888 Saturn sets a new standard of protection & is now in full production.
General Features
Size Universal
Colour White
Packaging 20 masks per box
Optional design Cupped or folded
Safety Features
CEcertified FDAcleared
In accordance with the US standard NIOSH42CFR84
Filtration efficacy of PM25 99
Filtration efficacy of PM03 95
Disposable
Comfort Features
The soft material makes the maskwearing more comfortable
Adjustable nose clip for a better fit
Two elastic ear loops for a more secure maskadjustment
High fit effectiveness
Fits more tightly against the face cupped respirators
Conveniently portable folded respirators
Filtration efficacy
Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO
100 compliant with regulations CE FDA NIOSH42C FR84
Our N95 respirators have been confirmed to meet all of the performance requirements set by the US standard NIOSH42C FR84 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request
Nonreusable NR
In order for your N95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use
Cupped Design
Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket If youre looking for a more portable alternative check out our folded mask design
Remember if your mask gets damaged its best to just throw it away
User Seal Check
Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to
Take the mask in one hand so that the nose clip is turned upwards
Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The bottom strap should go below your ears over your neck The top strap should go high on your head above the ears
Adjust the mask carefully against your face not allowing for any gaps between the mask and your face
Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask
Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect it
General Features
Size Universal
Colour White
Packaging 20 masks per box
Safety Features
CEcertified FDAcleared
In accordance with the European standard EN 1492001A12009
Filtration efficacy of PM25 99
Filtration efficacy of PM03 94
Disposable
Inward leakage lt8
Comfort Features
The soft material makes the maskwearing more comfortable
Adjustable nose clip for a better fit
Two elastic headbands for a more secure maskadjustment
High fit effectiveness
Less moisture and heat buildup valved respirators
More lightweight and easier to carry nonvalved respirators
Filtration efficacy
Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO
100 compliant with regulations CE FDA EN 1492001A12009
Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request
Nonreusable NR
In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use
Folded Design
You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks
Valved
The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles
nbsp
Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to
Take the mask in one hand so that the nose clip is turned upwards
Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto
General Features
Size Universal
Colour White
Packaging 20 masks per box
Optional design Cupped or folded
Optional feature Valved or nonvalved
Safety Features
CEcertified FDAcleared
In accordance with the European standard EN 1492001A12009
Filtration efficacy of PM25 99
Filtration efficacy of PM03 99
Disposable
Inward leakage lt2
Comfort Features
The soft material makes the maskwearing more comfortable
Adjustable nose clip for a better fit
Two elastic headbands for a more secure maskadjustment
High fit effectiveness
Less moisture and heat buildup valved respirators
More lightweight and easier to carry nonvalved respirators
Filtration efficacy
Our filtering face piece respirators can be used for respiratory protection against variousnonoily airborne contaminants It is extremely effective 99 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO
100 compliant with regulations CE FDA EN 1492001A12009
Our FFP3 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request
Nonreusable NR
In order for your FFP3 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use
Decide for yourself
Vannin Healthcare Global is one of the rare suppliers who let you choose your FFP3 masks design at no additional cost If youre indifferent about the design of your respirator or just want to surprise your future self feel free to skip this step
Choose the design Cupped or Folded
Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket Remember if your mask gets damaged its best to just throw it away
Folded masks on the other hand you can easily carry around in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask
I want the folded FFP3 respirator mask
The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masksfor safety reasons Th
General Features
Size Universal
Colour White
Packaging 20 masks per box
Fluid resistant
Optional design Cupped or folded
Safety Features
CEcertified FDAcleared
In accordance with the Chinese standard GB26262006
Filtration efficacy of PM25 99
Filtration efficacy of PM03 95
Disposable
Inward leakage lt8
Comfort Features
The soft material makes the maskwearing more comfortable
Adjustable nose clip for a better fit
Two elastic ear loops for a more secure maskadjustment
High fit effectiveness
Filtration efficacy
Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO
100 compliant with regulations CE FDA GB26262006
Our KN95 respirators have been confirmed to meet all of the performance requirements set by the Chinese standard GB26262006 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request
Nonreusable NR
In order for your KN95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use
Fluid Resistant
Our filtering face piece respirators are FDAcleared as being adequately fluid resistant Therefore they are recommended for use during surgical procedures or circumstances where one could come in contact with infectious splatters of bodily fluids
User Seal Check
Before entering a possibly contaminated area you need to properly put on your filtering face piece To do this you need to
Take the mask by its ear loops one in each hand with the nose clip up
Position the respirator under your chin
Place each ear loop behind its respective ear
Adjust the mask carefully against your face not allowing for any gaps between the mask and your face
Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask
Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect its position and then quickly exhale Depending on where you fill the air passing adjust the nose clip or the entire mask accordingly following the aforementioned steps If there are no gaps for the air to pass through you have correctly put on the mask
