Supplier: Mechanical flow meters
FILL-RITE 901CL Mechanical Flow Meter FILL-RITE 901CL Mechanical Flow Meter Features Flow ports that can be positioned vertically or horizontally Maximum pressure of 50 psi (3.5 bar) Aluminum housing with Viton and Buna seals UL/cUL, CE listed ±2% accuracy 1' inlet and outlet
YJ-120 series Mechanical Flow meter is used for fuel transferring application, diesel fuel, kerosene ect.These flow meters are reliable, inexpensive, and easy to install and simple to calibrate on the workplace.lt has the advantage of easy reading, quick resetting, and knob, flexible flow ports can be positioned vertically or horizontally. The easy reset register indicates product use up to 999/999.9.The master totalizer registers up to 999999/9999, 9999.Aluminium metering chamber, thread connection. Mechanical readout device with rotating wheels.
Water Milk Analog Magnetic Flow Meter Price Electromagnetic Flowmeter Wastewater Flow Meter, Mechanical Smart Electromagnetic Flowmeter Quick Details: Place of Origin Henan, China (Mainland) Brand Name WEILI Model Number MGG Product Name MGG Medium Corrosive Accuracy 0.5% Power supply 220VAC/ 24VDC Output 4-20mA /RS485 Application Measuring Liquids Connection Thread Material Stainless Steel Type Integral Product Description: Magne W3000 PLUS Sanitary Centrifugal type Electromagnetic flowmeter adopting new sanitary centrifugal liner and technology ,which is in line with the food industry hygiene requirements , At the same time, its stainless steel shell connected with stainless steel clamp ,easy to remove and clean , so that the flowmeter can not easily be contaminated in using process and applied in food manufacture processing of Mineral water, soy sauce, jam, beer, fruit juice, rice, milk ,etc and Health and chemical industry . Nominal Bore DN10ï½?DN300mm Nominal Pressure 1.0ï½?4.0MPa Accuracy ±0.5%ï¼?±0.3% Flow range 0ï½?10m/s(Flow Velocity) Liner materia PFA Measuring Electrodes 316L Stainless steel , Harrington alloy B/C, Titanium , Tantalum Shell material Stainless steel Medium temperature Remote type-10 ~+160 ,Integral type -10 ï½? +80 Connection Mode ISO Standard Quick Connector Main Features: 1) It adopting new sanitary centrifugal liner,that prevent the residue of measured media accumulated in the measuring pipe . 2) It used Fast Connection program and makes the demolition of the electromagnetic flowmeter, maintenance and cleaning to be facilitated. 3)It uses 16 digit embedded Super-Micro power consumption Microprocessor ,meanwhile adopts special technical designing excitation system of sensor ,having the functions such as higher integration ,fast in operational speed ,best accuracy in calculation ,digital signal processing ,strong capability of interference immunity ,stable and reliable measurement. 4)The flowmeter is a two-way measurement system with three totalizers: positive total, reverse total and total difference; can display positive and negative flow, and has multiple outputs: current, pulse, digital communication, HART protocol.
YJ-120 series Mechanical Flow meter is used for fuel transferring application, diesel fuel, kerosene ect.These flow meters are reliable, inexpensive, and easy to install and simple to calibrate on the workplace.lt has the advantage of easy reading, quick resetting, and knob, flexible flow ports can be positioned vertically or horizontally. The easy reset register indicates product use up to 999/999.9.The master totalizer registers up to 999999/9999, 9999.Aluminium metering chamber, thread connection. Mechanical readout device with rotating wheels.
Flow meter OGM-R-25 with oval gear (similar to �?�?�?-25) is usually used for volume measurement of non-aggressive petroleum products. Equipped with a mechanical counting device, this flow meter can be used in stationary technical installations, as well as in mobile refueling and pumping installations on land. The elliptical gear flow meter OGM-R-25 should be used within the temperature range specified for the instrument, which ensures sufficient accuracy, usually up to 0.5%, and it is a relatively accurate flow measurement instrument. After long-term use of the elliptical gear flow meter, its internal gears will be corroded and worn, thus affecting the measurement accuracy. Therefore, it is necessary to pay attention to the observation frequently and check it regularly. OGM series elliptical gear flow meters have good repeatability and long service life, which can be widely used in petroleum, chemical and other industries.
MF5700 Series Protable Gas Flow Meters General description MF5700 series mass flow meters feature cost effective ultra low power operating on 4 AAbatteries. The portable design has excellent exchangeable mechanical adaptors, easy dataaccessible and user programmable capabilities. The internal data storage can also help forpurpose flow applications. MF5700 Series Protable Gas Flow Meters Features and Applications - Ultra low power by batteries or optional external AC adaptor - Potable design with rotatable meter head and easy exchangeable mechanical adaptors - Customizable flow range with over 30:1 turn-down - Rs485 Modbus protocol ready for networking - User programmable range alarm for safety and other monitoring/control functionality - Internal data storage for additional data safety - Hygienic and oxygen safe copper body for various fluids MF5700 Series Protable Gas Flow Meters Applications Mechanics Food Tobacco Chemistry Beverage Glass Agriculture Research Pharmaceutics Instrumentation MF5700 Series Protable Gas Flow Meters Specifications * Flow Range: - MF5706: 0~ 10, 25 SLPM - MF5712: 0 ~ 200 SLPM * Turn-down Ratio: 30:1 * Accuracy: �±(2.0+0.5 FS)% * Repeatability: 0.5% * Respâ??onse Time: â?¤2 sec * Output: RS485 (Optional)
The flow meter OGM-R-25/40 series flow meters with mechanical totalizers are designed for accurate measurement of high viscosity diesel, kerosene, motor oil and other viscous liquids. The use of oval gears in meter readers ensures high measurement accuracy over a wide range of pumped product viscosities. The meter body of this flowmeter is made of aluminum and the oval rotor is made of steel. There is an analog counter and a 7-digit display on the mechanical recorder. Oval gear meter OGM-R-25/40 can be used both in stationary technical installations and in mobile vehicles for filling and pumping oil products. Liquid flow meters with oval gears are designed to measure total and one-off quantities of light oil products, liquefied gas, and other non-corrosive liquids. The flow meter OGM-R-25 level gauge can be used both in stationary technical installations and in mobile vehicles for filling and pumping petroleum products. The design of the oval gear flow meter OGM-25/40 includes oval gears, which ensures reliability and high measurement accuracy. Counter with mechanical readout (SU) Working principle of Flow Meter OGM-25/40 The counter with oval gear OGM-R-25 works on the principle that two oval gears rotate and mesh under the action of fluid flow, and each rotation measures a certain volume of fluid. The rotation of the gears is transmitted to the counting mechanism, where it is converted into units of volume. In a word, OGM series oval gear flowmeters are used to transmit liquids with a large viscosity range, and have good repeatability and service life, and can be widely used in petroleum, chemical, pharmaceutical, transportation, food and other industries. Advantages of Oval Gear Flow Meter Compact structure Easy maintenance Easy to read and operate mechanical display Flexible installation Low pressure drop
MODEL: 2000 Current Speed Range 0~30 m/s, (0~1000)Pa Pressure range:5kPa Temperature Range: 0-120 Pitot Tube Material: anticorrosive
