Appearance white granule Particle size 2-4mm Purity 99% min Nitrogen 15.5% min Nitrate Nitrogen 14.1%-14.4% Ammoniacal Nitrogen 1.1%-1.3% Calcium 19% min Moisture 0.8% max Water insoluble matter 0.2% max Nitric 0.05% max Iron 0.005% max PH 5.6-6.8
1.Name: Sodium nitrate Chemical formula: NaNO3 Formula weght:84.99 2.Property: (1) ordinary sodium nitrate: white little crystals or light yellow (2) dry powder sodium nitrate: non-caking, showing loose status. Density:2.257. It is liable to deliquesce, dissolved in water, soluble in liquid ammonia, slightly soluble in ethanol and glycerin, Melting Point:308. While being heated up to about 380 it will decompose and release oxygen and turn into sodium nitrite,as the heating goes on, it will decompose into oxygen, nitrogen and nitrogen oxide. It has strong oxidability and can cause combustion explosion if being mixed with organic substance, sulfur, sodium nitrate etc. 3. Usage:Â it has been wildly used in the glass industry, dye, dynamite, metallurgy, machinery, ceramic etc. 4. Specification: (Technical Standards:GB/T4553-2002) Item Unit High G. First G. Qualified G. Dry powder G. Assay % 99.7 99.3 98.5 99.3 Sodium nitrite % 0.01 0.02 0.15 0.02 Chlorides % 0.25 0.30 -- 0.25 Water insolubles % 0.03 0.06 -- 0.03 Moisture % 1.0 1.5 2.00 0.2 Carbonates % 0.05 0.10 -- 0.1 Iron % 0.005 -- -- 0.005 Loose degree -- -- -- 95 5.Package: net 25kg/50kg net each in plasic woven inner plasic bag,or 500kg net each in flexible container.
Commodity: Ammonium nitrate porous prills Molecular formula: NH4NO3 Molecule Weight: 80 CAS: 6484-52-2 UN:1942 Hazardous class:5.1 Commodity: Ammonium nitrate porous prills 1.Production of granular porous ammonium nitrate for industrial use and agricultural granular ammonium nitrate. Products with low moisture content, not easy to cake; high compressive strength, not easy to break; high oil absorption rate. Ammonium nitrate content is more than 99%, the appearance is white granular crystals, no impurities visible to the naked eye. 2. Purpose: Explosive material: granular ammonium oil explosive is made by mixing porous ammonium nitrate with raw oil. Its speed can reach more than 3 200 m/s. This explosive has strong explosive power, safe and reliable use, low price, cost saving, and can usually reduce the cost by 20%-40%. At present, this kind of explosive has been widely used in mining, construction, railway and highway construction, agricultural and water conservancy construction and national defense and other fields. 3. Product specifications: Specifications: Appearance white granule Particle size 0.5-2.5mm NH4NO3 >99.5% N >34% Oil absorption > 8% Moisture < 0.2% PH >4
Specifications: Appearance white granule Particle size 2-4mm Purity 99% min Nitrogen 15.5% min Nitrate Nitrogen 14.1%-14.4% Ammoniacal Nitrogen 1.1%-1.3% Calcium 19% min Moisture 0.8% max Water insoluble matter 0.2% max Nitric 0.05% max Iron 0.005% max PH 5.6-6.8
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Chemical name:Magnesium nitrate Molecular formula:Mg(NO3)2.6H2O Molecular weight:256.40 Property:soluble in water,liquid ammonia, methanol and ethanol.Stable at room temperature, the relative density of 1.461, higher than the melting point of 95�°C off the water to generate alkaline magnesium nitrate, heated to 300�°C begins to decompose above 400�°C to completely decompose into magnesium oxide and Nitrogen oxide gas. Quality standard: Item Indicator Industrial grade Agriculture grade Magnesium nitrate (Mg(NO3)2.6H2O) â?¥98.0% â?¥98.0% PH value â?¥4 --- Heavy metal â?¤0.002 --- Water insoluble â?¤0.05% â?¤0.1% Iron â?¤0.001% --- Magnesium oxide content(CaO) --- â?¥15% Nitrogen content(N) --- â?¥10.7% Use:Concentrated nitric acid for industrial de-water agent, manufacture of explosives, catalysts and other magnesium salts and nitrates catalyst raw materials, wheat ashing agent.Used in agriculture, magnesium soluble fertilizer for soilless culture. Packing:25/50KGlined with plastic bag and exterior is woven bagPacking or according to customers requirements. 1.Purity 98% white granule 2.Used for fertilizer or industrial material 3.Export Asia/Europe 4.ISO9001
Assay % 99.8% Moisture % 0.10% Water-Insolubles % 0.01% Chlorides % 0.03% Sulphates% 0.01% Iron% 0.01% Nitrogen % 13.8% Potassium Oxide % 46.0% Calcium and Magnesium as oxides% 0.5%
Commodity 1 provides Zircon ore directly from the mine site to the global market. There are no middlemen involved, only our staff on the ground. We strive to organize smooth and transparent transactions. We believe in building long-term relationships with our customers. We aim to be our customer's Zircon ore supplier. We offer the best prices for our buyers. PACKAGING & DELIVERY Packaging Details: Sand Port: Lagos Apapa Port, Nigeria Bags: 50 kg Container: 20 ft Lead time: Quantity (metric tons) 25MT/Month 250MT/Month (Lead days) 30 Days 30 Days COMPOSITION ANALYSIS OF THE ZIRCON ORE Element Average content Zirconium oxide (ZrO2) 65-70% Silicon dioxide (SiO2) 20-25% Hafnium oxide (HfO2) 0.2-4% Titanium dioxide (TiO2) 0.1-1% Iron oxide (Fe2O3) 0.1-0.5% Other elements 0-1% The composition of zircon sand can vary depending on the place of deposit. For example, zircon sand from Australia generally has a higher percentage of zirconium oxide than zircon sand from India. The composition of the zircon sand is crucial because it determines the characteristics of the zircon that can be formed from the metal. For example, zirconium copper with a high percentage of zirconium oxide will produce zircon with a high melting point and high corrosion resistance. The composition of the zircon sand is also essential in determining the extraction method of zircon from the ore for example, hafnium oxide-rich zircon copper is mined using hydrofluoric acid leaching. In general, the composition of zircon sand is an essential factor that affects the characteristics of zircon that can be produced from the ore and the methods that can be used to extract zircon from the ore. Zircon ore composition varies slightly based on the source and what region of Nigeria it is collected. We encourage buyers to ask for a free sample for their composition analysis and evaluation of ready-to-ship material. Samples are free, but buyers should arrange to pick up a free piece with a courier service.
