Aerosol Can Filling Machine
This Aerosol Can Filing,Valve Crimping and Gas Filling Machine
Also known as Perfume Spray Can Filling Machine, Air Freshener Can Filling Machine, Deodorant Can Filling Machine, Room Freshener Filling Machine
Suitable for Perfume Spray, Aerosol Cans, Air Fresheners, Deodorants, Room Fresheners etc.
Online Liquid Filling-Valve Crimping-Gas Filling unit with conveyor
Construction: Stainless Steel
Power: 380V 3 Phase, 50Hz/3KW
Filling Range-100ml to 1000ml
Production Capacity: 1000-3000 Cans Per Hour
Binary filling is the process of filling compressed air or nitrogen into the can, sealing the valve with a pouch, filling the raw material in the inner pouch of the can, completely isolating the raw material from the can body, and using the propellant with compressed air (purification) to replace propane butane liquefied gas, dimethyl ether, etc., thereby solving the trouble caused by the leakage of the raw material corroding the can. When the valve is opened, the compressed air in the tank presses the pouch to push the raw materials out of the tank. After the raw materials are completely squeezed out, the compressed air in the tank remains in the can, so the filling can be repeated. This can be changed by changing the valve actuator.
This equipment has been widely used in medicine, sanitation, fire fighting, daily chemical industries, such as: cosmetic sprays, household fire extinguishing agents, computer cleaning agents, shaving foam, etc. The machine has fast speed, accurate filling quantity, good air tightness of sealing, and the inflation pressure can be adjusted to the required pressure at will.
This machine assembles a sealing cylinder, a forced filling head and a filling cylinder, and the control part is controlled by a PLC controller. The sealing cylinder and the filling cylinder are controlled by several double air control directional valves. We design the whole machine on a workbench, which is safe and reliable, easy to maintain and operate.
Feature
1. The material contacted with liquid made of SS316L
2. The device operation interface can be programmed.
3. Equipment automatic initial pressure value display system
4. The operation action and speed can be set freely through the program
5. Control the induction system, set the can to reach the designated position before starting, safe and reliable, and also ensure the safety of the operator.
6. When the pressure value is insufficient, the device automatically stops, and the pressure automatically starts again after the pressure reaches the specified value. Achieve quality control safety in detail.
7. The safe setting of the initial pressure value, the initial pressure value of the equipment does not reach the specified pressure, and is not sealed and inflated. Reduce defective products, reduce waste of packaging materials, and improve quality control rate.
Product Description:
Semi automatic aerosol filling machine consists of three parts: liquid filling, sealing and gas filling, can be designed at one worktable or separate worktables. Using linear pushing bottle system, cans moving automatically.
It is widely used in daily chemical, auto-care, household-care, food and pharmaceutical industry. Filling moisture spray, wax board, carburetor cleaner, air fresher, spray paint etc.
Product Application:
It is suitable for filling various media and producing various aerosol chemical products. Specialized technical design saves people and time. The filling head is controlled independently and can-free, while the inflatable head is guided with accurate measurement, high efficiency and little air consumption. It is widely used in experimental household production and chemical laboratory equipment. It includes aerosol products such as food, medicine, hygiene, automobile, environmental protection, fire fighting and daily necessities.
Product Features:
Three-head machine collects irrigation liquid, seals, and inflates on a worktable. Only one person needs to operate in turn to complete the production of conventional aerosol. The machine is safe, reliable, easy to operate, easy to maintain and occupies a small area. It belongs to economic equipment for aerosol product production.
The production line type is integrated from the original semi-automatic aerosol filling machine through improvement, optimization and integration. The semi-automatic filling, sealing and aerating machines are installed on a worktable. Filler - sealer - inflator is controlled separately. According to the process sequence, linear production transfer, complete all actions. The utility model belongs to a semi-automatic applicable equipment for aerosol product production.
The machine has the advantages of fast aeration speed, accurate filling capacity, good sealing air tightness and adjustable aeration pressure. Specialized in gas single filling and aerosol. Secondary pressurized filling of multi-component gases: including compressed air, nitrogen, carbon dioxide, oxygen, etc. Sealing machine and liquid filling machine are optional.
The NEW Fully-automatic BIB Bag Filler | WEB Fed Bag-in-Box Filling Machine
Difference from the previous generation of fully-automatic Bag-in-Box filling machine:
1) Different direction and higher exit of filled bags, which makes the filling machine match our carton packaging line better.
2) Cutting bags apart after filling and capping, which makes it easier for users to fill different sized bags.
The NEW Fully-automatic BIB Bag Filler | WEB Fed Bag-in-Box Filling Machine is especially for filling spout-prepared bags with a wide range of liquids like drinking water, post mix syrup coke, edible oil and beverage. It features fully-automatic by employing PLC and touch screen control system. The whole process of continuous bags feed, decapping, vacuumization (optional), nitrogen injection (optional), filling, capping, cutting apart from continuous bags and transiting to the conveyor can be completed automatically, no human operation required.
This machine can cap various spigots including Vitop and Scholle's. It is designed with CIP (Clean in Place) function and circuit connection.
Features:
1) Fully-automatic, continuous WEB type bags fed.
2) Easy to use. The touch-screen control system makes operation easy.
3) Self-test and protecting function.
4) An electromagnetic flow meter system employed improves filling precision and truly achieves the quantitative filling.
5) Grade 304 stainless steel body and 316L stainless steel fluid-contact parts.
6) Filling a different capacity bag acceptable only by changing the setting.
7) Perfect spout clamping system ensures reliable running of the machine and meanwhile no damage to the bag spout.
8) Options of vacuumization and nitrogen injection available for specific products use.
Specifications:
Applicable bags: pre-cut continuous module or WEB type bags, spout-prepared, 3-25 litres. (Spout is called "Gland" or "Flange" too.)
Filling capacity:
500 bags/hour for 5 litres
400 bags/hour for 10 litres
300 bags/hour for 20 litres
Power: 3KW
Compressed air: 6-8bar, 1.5m3/h.
Procedures:
1. Automatically feed bags.
2. Automatically decap, fill, cap and then cut apart from the continuous bags.
3. Automatically exit filled bags.
Fully-automatic. Grade 304 stainless steel construction and grade 316L stainless steel fluid-contact parts. World famous brands of key components and many are imported.
Absolutely EU quality standard, but less than half of EU price.
We also supply the matched box packaging line.
This Fully-automatic WEB Bag Aseptic Filler | Bag in Box Aseptic Filling Machine is designed for aseptically filling spout-prepared aseptic bags with sterile fluids like natural juice, concentrate, vegetable juice, fruit syrup, fruit jam, magma beverage, dairy product and pharmaceutical. It features fully-automatic by employing PLC and touch screen control system. The whole process of continuous bags feed, sterilization, decapping, filling, capping, cutting apart from continuous bags and transiting to the conveyor can be completed automatically, no human operation required.
Features:
1) Continuous bags feed and fully-automatic.
2) Easy to use. The touch-screen control system makes operation easy.
3) Self-test and protecting function.
4) An electromagnetic flow meter system employed improves filling precision and truly achieves the quantitative filling.
5) Grade 304 stainless steel body and 316L stainless fluid-contact parts.
6) Employed decapping confirmation system ensures filling will not work before decapping and this guarantees the sterile room not to be polluted by the fluid.
7) Perfect-design filling system ensures reliable filling.
8) Multiple-step sterilization ensures a true aseptic filling.
9) Decapping, filling and capping parts move in an enclosed overpressure steam room which ensures the sterile conditions.
10) A pressure sensor working with a pumping system ensures the stable overpressure in the sterile filling chamber.
11) Compact construction.
12) Reliable and in a high standard. Most components are German branded.
13) Designed with CIP (Clean-in-Place) function and circuit connection.
14) New technology ensures no condensed water dripping onto bags.
Specifications:
Applicable bags: pre-cut continuous module or WEB type, 1-inch-spout prepared, 3-25 litres aseptic bags. (Spout is called Gland or Flange too.)
Filling capacity: 300-350 bags/hour for 10 litres
Power: 1.5 KW
Compressed air: 6-8 bar, 1.5 m3/h.
Food-grade steam: 5-8bar, 36kg/h
Economic Semi-automatic Single-head Bag in Box Aseptic Filling Machine and Double-head Bag in Box Aseptic Filler available.
Fully-automatic BIB Filler | WEB Fed Bag-in-Box Filling Machine
This Fully-automatic BIB Filler | WEB Fed Bag-in-Box Filling Machine is especially for filling spout-prepared bags with a wide range of liquids like drinking water, juice, milk, edible oil and beverage. It features fully-automatic by employing PLC and touch screen control system. The whole process of cutting apart from the fed continuous bags, delivering to heads for decapping, vacuumization (optional), nitrogen injection (optional), filling, capping and transiting to the conveyor can be completed automatically, no human operation required.
This filling machine can cap various spigots including Vitop and Scholle's. It is designed with CIP (Clean in Place) function and circuit connection.
Features:
1) Fully-automatic, continuous WEB type bags fed.
2) Easy to use. The touch-screen control system makes operation easy.
3) Self-test and protecting function.
4) An electromagnetic flow meter system employed improves filling precision and truly achieves the quantitative filling.
5) Grade 304 stainless steel body and 316L stainless steel fluid-contact parts.
6) Filling a different capacity bag acceptable only by changing the setting.
7) Perfect spout clamping system ensures reliable running of the machine and meanwhile no damage to the bag spout.
8) Options of vacuumization and nitrogen injection available for specific products use.
Specifications:
Applicable bags: pre-cut continuous module or WEB type bags, spout-prepared, 3-25 litres. (Spout is called Gland or Flange too.)
Filling capacity:
500 bags/hour for 5 litres
400 bags/hour for 10 litres
300 bags/hour for 20 litres
Power: 3KW
Compressed air: 6-8bar, 1.5m3/h.
Procedures:
1. Automatically feed bags.
2. Automatically cut apart, decap, fill and cap bags.
3. Automatically exit filled bags.
Fully-automatic. Grade 304 stainless steel construction and grade 316L stainless steel fluid-contact parts. World famous brands of key components and many are imported.
We also supply the matched box packaging line. For information, please contact us.
Effiicient and economical solution for packing dry powdery and granular products into open mouth bags.
Available in two series, sa type for filling weights upto 25kgs and sb type for filling weights from 25kgs to 50kgs.
Both these can be supplied with single or twin scales, depending on the capacity required. Weighing capacity ranges from 300 - 1000 bags per hour, depending on the type of product and filling weights.
Products: all types of granular and powdery products such as fertilisers, detergent, soap noodles, abrasive grit, plastic pellets, sugar, flour, food grains, spices.
Weighing type: net or gross weighing with load cells.
Product feed: by gravity, screw feed, belt feed or vibratory feed as required.
Pre-Filled Syringe Filling Machine and Dental Cartridge Filling Machine, Stoppering Machine, Sealing Machine, Plunger Insertion Machine, and Labeling Machine consist of the main structure covered polycarbonate cabinet and SS 304 pipe, laminar airflow, filling head with individual servo motor, out-feed collection tray, vacuum system, pneumatic components, and electrical panel, AC Drive, PLC & HMI.
Pre Filled Syringe Machine loaded on Stainless Steel in-feed hopper. A Pre-filled syringe machine tray can directly be loaded onto the PFS machine. Duly filled & stoppered syringes delivered on outfeed collection tray without hand touch.
