Supplier: Fluorine chemical products including the refrigerant gas PTFE, PVDF, FEP, FKM, PFA and other series of fluoropolymers and fluorinated fine chemicals Services: Producing & exporting
Application:
This PTFE material is for making PTFE thread seal tape.
PTFE DF-201 suitable for low density tape
PTFE DF-203 suitable for high density tape
Material Properties:
Excellent chemical resistance
Greatest resistance to fatigue
Flame resistant
No stick &Low coefficient of friction
Not hygroscopic (water absorption < 0,01%)
Excellent dielectric insulation properties
Storage&Package:
1.Stored in clean and dry places, and temperature range is 5~30
2.Net Weight 20kg/drum., 380 drums/20 GP
3.Should be Transported as non-dangerous product, avoiding heat, moisture &strong shock.
Specification:
Item PTFE Fine Powder DF-201/203
Excellent Grade
Smoothness & Cleaness Clean & white surface
Tensile Strength, (Mpa) DF-201 24.0
DF-203 28.0
Elongation at Rupture, (%) DF-201 350
DF-203 330
Volume Density, (g/L) 475±100
Extrude pressure, ( RR100) Mpa 9.7±4.2
Average Grain, ( m) 525±150
Moisture Content, (%) 0.04
Melting Point, () 327±5
Stand Relative Density 2.200
Thermal Inst, Index, 50/30
Electric Strength, (KV/MM 2.1
Dielectric Dissipation factor 3*104
For process Paste extrusion
Application:
Fluorinated Ethylene Propylene resin DS610 is enabling extrusion processing methods, used for wire insulation layer , tubes, films and so on.
Material Properties:
Excellent thermal quality stability
Outstanding chemical inertness
Good electrical insulation
Low coefficient of friction
Storage and package:
1.Stored in clean and dry places,and temperature range is 5~30â??.
2.Net Weight 25kg/bag
3.Should be Transported as non-dangerous product, avoiding heat, moisture &strong shock.
Attention:
The processing temperature should not be exceed 420â??, to prevent toxic gas from releasing.
Specification:
Item FEP DS610
A B
Appearance Translucent particle
Melting Index, g/10min 5.1~8.0 8.1~12.0
Hardness 58
Tensile Strength, â?¥, Mpa 21
Elongation at break, â?¥, % 300
Relative Gravity 2.12~2.17
Melting Point, â?? 265±10
Dielectric Constant (106HZ),â?¦ 2.15
Dissipation Factor (106HZ),â?¦ 7.0*10-4
Heat Stress Cracking Resistance -----
Usage Extrusion processed for generic type resin:
Wire insulation layer
FEP tube
FEP film
Application:
This PTFE Aqueous Dispersion is used for PTFE Coating & impregnating such as asbestos, fiberglass, anti-corrosive, abrasion resistant, filature and lubricating materials.
Material Properties:
Typical outstanding characteristics of fluoride Resin
Excellent thermal stability
Corrosion resistance ,Excellent chemical inertness
Good electrical insulation,Low coefficient of friction
Storage&Package:
1.Stored in clean and dry places,and temperature range is 5~30â??.
2.Net Weight 25kg/drum, 432drums/20â??GP. Or 1.2Mt/Drum.
3.Should be Transported as non-dangerous products, avoiding heat, moisture &strong shock.
Specification:
Item PTFE Aqueous Dispersion DF-301
Excellent Grade
Appearance Milky or yellow liquid
PTFE Content, % 60±2
Particle Size(μm) DF-301 0.2
PH Value 8.5~10.5
Viscosity (25â??),(Pa.s) (15-30)x10-3
Content of case active agent 4~6
For process Coating and Impregnating
Supplier: Fluorinated fine chemicals (diethyl fluoromalonate and 5-fluorine pyrimidine derivatives), chiral compounds (amino acids and their derivatives, like D-valine, l-valine, l-2-aminobutanamide hydrochloride, chloramphenicol and valnemulin hydrochloride)
Formula:KAl(SO4)2 12H2O
Relative Molecular Weight:474.39
CAS NO,: 7784-24-9
EINECS No.:5637-689-7
HS CODE.: 2833301000
Appearance: lump, white crystal, white powder
Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating
Usage;
Food industry: Buffering agents and leavening agents in food-grade products.
Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc.
Product Name Methyl perfluoroisobutyl ether
CAS No. 163702-08-7
MF C5H3F9O
EINECS: 000-000-0
Appearance liquid
Packing 200kg/drum
Shelf life 2 Years
Application: Methyl perfluoroisobutyl ether has high industrial value and is a widely used industrial raw material. Its downstream products can be used in precision electronic circuit board cleaning agents, pesticides and insecticides, and in fluorine-containing fine chemicals such as fluorine-containing pharmaceutical intermediates. It has high application value in synthesis.
Item
Specification Appearance
Colorless transparent liquid
Identification GC-MS
Assay 99.5% min
Water100PPM max
Free F 10PPM max
Perfluorooctanoic acid 100ppm max
