The buyer would like to receive quotations for -
Product Name: Electrodes Steel Rod/ Wire
Specifications:
Grade -6013 70118
Form- rod / wire
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Sohar, Oman
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Mr. Sajith
Please quote for the following wholesale product requirement -
Product : Low Carbon Steel Wire Rod
Specifications:
Grade : SAE1008B (Boron min 0.00080%)
Sizes: 5.5 mm, 6.5 mm
Quantity : 300 metric tons
Quantity Required : 300 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Bangkok,, Thailand
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Praveen Gupta
Buyer is interested to receive quotations for the following RFQ -
Product: Binding Wire- 18 gauge
Specifications:
Material: GI
Quantity: 10 containers
Quantity Required : 10 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Jebel Ali, United Arab Emirates
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Naureen Shaikh
Buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Wire Rods
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Colombo, Sri Lanka
Payment Terms : L/C 90 days
Looking for suppliers from : China
Contact : Upali Nandana
Please provide a quotation to the following requirement from importer -
Product Name: High Carbon Steel Wire Rods
Specifications:
Standard: ASTM
Type: Copper Coated
Application: Construction, Wire-drawing, weaving of wire mesh
Alloy Or Not: Non-Alloy
Quantity Required : 500 Metric Ton/Metric Tons Monthly(sample)
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : L/C
Looking for suppliers from : Europe
Contact : Rares Valean
The buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Wire Rods
Specifications:
1) MS HR Coil Gr. S355 JR, Silicone 0.02 Max. Size. 1100 X 4mm - 250 Ton Size. 1500 X 4mm - 250 Ton Be Ensure That: Silicone 0.02 Max
2) MS Wire Rod (Cold Drawn) 6mm - 10,000 Ton (SAE 1008 / 1010 / 101 MS Wire Rod (Cold Drawn ) 6mm (To Be Comply With Above & Any One Standards)
Quantity Required : 10000 Metric Ton/Metric Tons(sample)
Shipping Terms : CIF
Destination Port : Hamad Port, Qatar
Payment Terms : To be discussed with suppliers
Looking for suppliers from : India
Contact : Mohammed Ziauddin Ahmed
The buyer would like to receive quotations for -
Product Name: Steel Wire Rods
Specifications :
Material: Steel
Alloy or Not: Non Alloy
Technique: Hot Rolled Cold Rolled
Use: Cutting Steel, Construction
Process: Bending, Welding, Cutting
Surface: Black, Galvanized
Diameters: Customize
Quantity Required : 2000 Ton/Tons
Shipping Terms : CIF
Destination Port : Bangkok, Thailand
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Vichai
Please quote for the following wholesale product requirement -
Product Name: Steel Wire Rods
Specifications :
As Per ASTM 510 / A510M
Grade: SAE 1006 As Per ASTM A1040 SIZE 5.5mm
Quantity Required : 15000 Metric Ton/Metric Tons
Shipping Terms : CFR Or FOB
Destination Port : Damietta Port, Egypt
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Iman
The buyer would like to receive quotations for -
Product Name: Steel Wire Rod
Specifications :
Rolled Non-alloy Steel Wire For Cold Drawing C70d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 200 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): C: 0.68 - 0.72 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer. 2. Rolled Non-alloy Steel Wire For Cold Drawing C42d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 50 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): - C: 0.40 - 0.44 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer
Quantity Required : 250 Ton/Tons
Shipping Terms : DAP
Destination Port : Baia Mare,
Payment Terms : L/C
Looking for suppliers from : Europe
Contact : Rares Valean
