Nagaland coal is very appropriate for its use in brick kilns, steel industry etc. Specifications of good quality nagaland coal are gcv ( 7000+), ash 2.75%, moist 3.21%, vm 44.69%, fc 49.35%, sulphur 2.94%. By truck
Supplier: Low Ash Coal
Moisture 10 % Max Volatile Matter % (on dry basis) 10 % Max Ash % (on dry basis) 10 % Max
Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel. Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze). Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal. We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under: Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality. Complete combustion of coking coals resulting in almost negligible levels of pollution. Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications. We are planning to develop new trends as far as improved coke quality is concerned. Completely RCC coal & coke yard which ensures that the coke quality is maintained. Exclusive mechanized machines for exact sizing and screening of coke. Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke. We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys. We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven. Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required. The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.
Products and Services: We provide various types of coal with Guaranteed Calorific Value (GAR) ranging from 4700 to 7000, with low sulfur content, less than 1%. Our products include: GAR 7000 coal GAR 5800 coal NAR 4700 coal Our supply capacity reaches more than 200,000 MT/month, ensuring consistent availability for customers worldwide. We also have experience in fulfilling large orders, including orders of 1 MV with a capacity of more than 40,000 metric tons. Documents and Guarantees: We prioritize transparency and trust in every transaction. Complete documents such as Certificate of Analysis (CoA), Bill of Lading (BL), and other supporting documents are available to ensure smooth business processes. Additionally, we provide a 2% Performance Bond (PB) to ensure transaction security.
Taixi anthracite coal Taixi Anthracite Coal with the following specifications: 1) A.Size:8-30mm,10-30mmú¼ B.Moisture: 5%Max.(on receive basis) C.Ash: 7.0% Max.(on dry basis) D.Sulphur:0.4%Max.(on dry basis) E.Volotile Matter:9.0% Max.(on dry basis) F.Caloricity:7500Kcal/KG(Min.) 2)A.Size: 18-40mm and 25-60mm ,30-80mm B.Moisture: 5%Max.(on receive basis) C.Ash:7-8 %Max.(on dry basis) D.Sulphur:0.5%Max.(on dry basis) E.Volotile Matter:9-9.50%Max.(on dry basis) F.Caloricity:7500Kcal/KG(Min.) 3) A.Size:0-6mm,0-13mm, B.Moisture: 8%Max.(on receive basis) C.Ash: 7-8.0% Max.(on dry basis) D.Sulphur:0.5%Max.(on dry basis) E.Volotile Matter:9.0% Max.(on dry basis) F.Caloricity:7500Kcal/KG(Min.) In bulk and super bag
We can supply met coal (hi and med vol) as requested, need to start with 30,000 tons per month and can work up to 110,000 tons per month; specs as outlined below: Tonnage-25-30k tons per month Spec: Dry-Basis Ash-8-9.5 Sulfur-1-1.1 BTU-13,000-14,000 Vol- 26 to 32(M-H) FSI- 9 Tonnage-1st Month-25-30k 2ndMonth-35-40k & 40k per month for the remainder of contract. Spec: Dry-Basis Ash-7.5-8.5 Sulfur-0.5% BTU-13,500-14000 Vol-32-35(H) FSI-7-8.5 Three year contract, fixed price for first two years; adjusted to market in 3rd year, or as negotiated. This is good coal and with a two year fixed price contract it should be very attractive. Buyer can inspect coal on site and contract directly with producer if required. Producer has 20+ years in business and sells to some of the largest US power and steel companies.
High quality Australian Coal for export worldwide. Australian coal is renowned for its high quality and favorable characteristics, making it a sought-after commodity on the global market. The coal extracted from Australian mines is known for its low impurity content, high energy yield, and efficient combustion properties. The country's coal reserves include both metallurgical coal, essential for steel production, and thermal coal, widely used in electricity generation. The consistency in quality, coupled with advanced mining practices and stringent environmental standards, positions Australian coal as a reliable and environmentally responsible choice for various industries worldwide. Australia's commitment to sustainable mining practices further enhances the appeal of its coal as a dependable energy and industrial resource on the international stage.
Available Colombian Thermal Coal Offered for Sale Effective 6/10/2022 # RESOURCE BTU PORT TYPE TONNAGE/MO. PRICE SULFUR ASH MOISTURE 1 RB-1 (F) 10,400 Bolivar/Brisas Thermal B 100K MT (3 Yrs) $MT 0.65% 9.2% 8.8% 2 RB-1 (F) 10,800 Bolivar/Brisas Thermal B 40K MT (Spot) MT 0.78% 5.5% 7.7% 3 RB-1 (F) 12,400 Bolivar/Brisas Thermal A 100K MT (3 Yrs) MT 0.67% 4.5% 5.9% 4 RB-1 (F) 12,661 Bolivar/Brisas Thermal A 100K MT (3 Yrs) MT 0.89% 6.7% 3.8% 5 RB-1 (F) 12,675 Bolivar/Brisas Thermal A 100K MT (3 Yrs) MT 0.41% 1.8% 7.1% 6 RB-2 (T) 13,200 Bolivar Thermal A 180K MT (3 Yrs) MT 0.94% 3.3% 10.6% All Thermal Coal Listed Above Subject to Prior Sale This is our most recent distribution sheet outlining available thermal coal we have directly ex. Colombia, SA. These long-term and spot allocations are structured through our established production network. We can deliver product to the vessel less expensively than in the US due to lower labor cost and excessive US logistics charges. (Rail/Barge)
