The buyer would like to receive quotations for -
Product Name: Sugar Refinery Machinery Spare Parts
Specification :-
Type :- FOR P.R. RED-038
FOR FINAL MOLASSES PUMPS SPARE PARTS.
BARE SHAFT (PUMP ONLY) GEAR PUMP
NOTE: BRAND: ROTAN PUMP, DESMI A/S
MODEL: HD101E-1U22B SERIAL #: 307950101 (1pc)
FOR P.R. RED-037
FOR FINAL MOLASSES PUMPS SPARE PARTS.
2 pcs IDLER ROTAN POS AB
4 pcs BUSH IDLER ROTAN POS AD
2 pcs BUSH MAIN BEARING ROTAN POS BC
2 pcs PIN IDLER ROTAN POS AC
NOTE: ALL PARTS OF ROTAN PUMP, DESMI A/S,
MODEL: HD101E-1U-22B SERIAL #; 307950101
FOR P.R. RED-034
FOR REFINED SUGAR WAREHOUSE #14-#16 BELT CONVEYOR GEARED MOTOR, REPLACEMENT AND SPARE
2 units GEARED MOTOR MODEL: KA 87/T DV 112 M4/BMG
POWER: 4KW VOLTAGE: 460VAC, 60HZ
AMPS: 7.9AMPS BRAKE V: 440VAC
RECTIFIER: BGE 1.5 BRAND: SEW-EURO DRIVE
2 units GEARED MOTOR MODEL: KA 107/T DV 160 M4
POWER: 11KW VOLTAGE: 460VAC, 60HZ
AMPS: 20.5AMPS BRAND: SEW-EURO DRIVE
FOR P.R. RED-035
FOR REFINED SUGAR WAREHOUSE #14-#16 BELT CONVEYOR GEARED MOTOR, REPLACEMENT AND SPARE
2 units GEARED MOTOR MODEL: KA 97/T DV 132 S4/BMG
POWER: 5.5KW VOLTAGE: 460VAC, 60HZ AMPS: 10.4AMPS BRAKE V: 440VAC RECTIFIER: BGE 1.5
BRAND: SEW-EURO DRIVE
2 units BRAKE FULL SET, BMG FOR SEW-EURO DRIVE
MODEL: KA 97/T DV 132 S4/BMG VOLTAGE: 460VAC
BRAND: SEW-EURO DRIVE
FOR P.R. PHD-044
FOR COGEN STEAM TRAP REPLACEMENT
2 pcs THERMODYNAMICS STEAM TRAP, BIMETALIC
ELEMENT 3/4" 800LBS PN60, A216 BODY
(OR BETTER), SOCKET WELD CONNECTION
OPERATING CONDITION SH STEAM @ 45BAR (Ci)
440°C (TEMP RANGE: 450°C MAX) Brand: SPIRAX SARCO, ARI Germany or Equivalent
FOR P.R. MID-039
For Mill Repair Use
1 unit Impact Wrench (Cordless, Brushless) Brand : MAKITA Model : DTW285RFJX
Complete set includes:
1 unit MAKITA DTW285RFJX Cordless Impact Wrench
1 pc : Belt Clip
2 pcs : Battery (18V 3.0 AH LXT Li-Ion)
1 pc : Charger
1 pc : MAKPAC type 2 case (821550-0)
1 pc : Socket Bit (B-65232)
1 pc : Extension
FOR P.R. BLD-017
FOR BOILER RETUBING (BOILER TUBE EXPANDER (WITHOUT MANDREL;, THOMAS C. WILSON,
INC
1 unit TUBE O.D. = 2" TUBE EXPANDER
TUBE WALL THICKNESS = 3.66MM to 4.2MM
TUBE SEAT THICKNESS = 2-1/4"(57.15MM) TO 3-1/4"
(82.55MM)
1 unit TUBE O.D. = 2-1/2“ TUBE EXPANDER
TUBE WALL THICKNESS = 3.8MM TO 4.57MM
TUBE SEAT THICKNESS = 2-1/4"(57.15MM) TO 3-1/4"
(82 55MM)
1 unit TUBE O.D - 3" TUBE EXPANDER
TUBE WALL THICKNESS - 3.8MM TO 4.5MM
TUBE SEAT THICKNESS = 2-1/4"(57.15MM) TO 3-1/4"
(82 55MM)
1 unit TUBE O.D. = 4" TUBE EXPANDER
TUBE WALL THICKNESS = 3.4MM TO 5.08MM
TUBE SEAT THICKNESS = 2-1/4"(57.15MMI TO 3-1/4" (82.55MM)
NOTE: Please advise Tube Seat Thickness for each Tube size so we can quote the appropriate tube expander for the job. For Tube Seat thickness more than 2-5/8" thick, step expansion is required which requires 2 types of expanders - Series 65 & Series 114. supplier can quote accordingly
FOR P.R. BLD-020
ITEM 1- FOR EVAPORATOR SET #4 CELL 2, 3, & 4 TUBES USE. ITEM 2- FOR REPLACEMENT OF DAMAGED TUBE EXPANDER FOR JUICE HEATER USE
1 unit EXPANDER TUBE 1-1/2" BRAND: THOMAS WILSON
3 units EXPANDER TUBE 1-1/2" BRAND: THOMAS WILSON
FOR P.R. BLD-020
FOR INSIDE TUBE CLEANING/JTA1 & JTA2 BOILER
4 sets HOSE TUBE CLEANER ASSY 1/2IN X SOFT 2 BRAID, ARMORED TYPE FIG.3 CAT. 7053-0050 1/2 NPT
4 sets MOTOR AIR SET ECT-212 4090-0175 SET
CAT. NO. 4090-0175
2 pcs HEAD CUTTER ASSY T C. WILSON M-CHJ-212
4195-4606
CAT. NO. 4195-4606
REF: THOMAS C WILSON INC.
21-11 44THAVE.
LONG ISLAND CITY
NEW YORK
FOR P.R. MID-025
For B and l-Mill Hydraulic Top Caps
2 pcs CHESTERTON 22KE ULTRASEAL Materials: : Thermoset diamined core polymer seal shore 95A Pressure : 15,000 PSI Temp. : 85°C Tensile strength : 5,000 PSI Size : 390.2 x 360mm x 25mm H
3 pcs CHESTERTON 22 KPM ULTRA SEAL DOU-SEAL Materials: : Thermoset Diamined Cure Polymer Seal Shore 95A Pressure : 15,000 PSI
Tensile Strength : 5,000 PSI
Size : 305mm X 355 8mm
Buyer is interested to receive quotations for the following RFQ -
Product Name : Machine parts
Specification:
PR No. - Item Description - UoM - Balance Qty - Remarks
6001 PV511 Seat Nos 1 Spares For Control Valves (Chlorine and HCL application) valves
6001 PV 554 Bellow Nos 1 spares for control valves (Chlorine and HCL application) valves
6011 Heater Skin Thermocouple , Type:K type, Range: 0 to 600 degree celcius Nos 3 Prills Thermocouples , O2 Hardware ,Boiler Converters,Flame scanner for HCL Furnace Thermocouples
6011 Boiler Servomotor Feedback R to I converter,Make:P&F,Model:KFD2-UT2-1 Nos 1 Prills Thermocouples , O2 Hardware ,Boiler Converters,Flame scanner for HCL Furnace Thermocouples
6022 Diaphragm P. 1502 / 3002 (NBR) (Replace ID# 128066) Nos 1 globe type control valves actuators spares are required for cell house,prill,cl2 area valves
6036 PV555 Bellow,Valve Size:6'' Nos 1 Spare Bellows are required for Bellow seal Control valve Installed in Bullet Area and Cell House valves
6036 PV 530A Bellow,Valve Size:1.5'' Nos 1 Spare Bellows are required for Bellow seal Control valve Installed in Bullet Area and Cell House SPARE
6036 PV 530B Bellow,Valve Size:2'' Nos 1 Spare Bellows are required for Bellow seal Control valve Installed in Bullet Area and Cell House SPARE
6036 PV 540 Bellow,Valve Size:3'' Nos 1 Spare Bellows are required for Bellow seal Control valve Installed in Bullet Area and Cell House SPARE
6044 On off Valve Body,Wafer Type,Size:12'',PFA Lined,Moc:PTFE Nos 1 On off Valve Body are Required for Critical Valves(Detail Valve Sheet Attached) valves
6044 On off Valve Body, Wafer Type , Size : 2'', PFA lined , MOC: PTFE Nos 1 On off Valve Body are Required for Critical Valves(Detail Valve Sheet Attached) valves
6044 On off Valve Body, Wafer Type , Size : 3'', PFA lined , MOC: PTFE Nos 1 On off Valve Body are Required for Critical Valves(Detail Valve Sheet Attached) valves
6044 Butterfly Valve Body , Size:5'', Type: Wafer,PTFE Lined Body and PFA Lined Disc,Operating Temp:70 Degree C,Fluid:Saturated Brine Nos 1 On off Valve Body are Required for Critical Valves(Detail Valve Sheet Attached) valves
6044 On off Valve Body,Wafer Type,Size:10'',PFA Lined,Moc:PTFE Nos 1 On off Valve Body are Required for Critical Valves(Detail Valve Sheet Attached) valves
6044 On off Valve Body,Wafer Type,Size:4'',PFA Lined,Moc:PTFE Nos 1 On off Valve Body are Required for Critical Valves(Detail Valve Sheet Attached) valves
6044 On off Valve Body,Wafer Type,Size:14'',PFA Lined,Moc:PTFE Nos 1 On off Valve Body are Required for Critical Valves(Detail Valve Sheet Attached) valves
6046 Glass Fuse, 2A Nos 20 Spare Relay Board are required for DCS for DI and DO Cards Spare
6051 Make:VAL.CO s.r.l,Model:ST26-N-3,Vn-350V,In-0.5 A,Pn:70VA,EX 2G.Exd ii Rated Nos 1 LPG Vaporiser Solenoid valve diaphragm and LPG Level switch. valves
6051 Make:COTRAKO 12-12,UNI 606+,DN50 PN40,A105 N.7104-278, Valve Diaphragm Nos 2 LPG Vaporiser Solenoid valve diaphragm and LPG Level switch. valves
6056 Make: Actreg,Model:ACT300R, Supply Max pressure : 10 Bar,Single Acting Nos 1 actuator seal kit are required for brine valves
6060 Make:Flowserve,Automax Actuator Spring set,Model:S085D Nos 1 on/off valves actuators springs are required for caustic,cl2,hypo,hcl and prill plant valves
6059 Brine Turbidity Meter, Application :Saturated Brine,Make:GF, Model: 3-4150-3,Operating Temperature:65 Degree C,Design Tem: 80 Degree C,Output - 4-20ma,Supply voltage : 110 VAC Nos 1 CMF plant Brine Turbidity meter required as spare. SPARE
6061 LPG Boiler PLC AI Module Nos 1 PLC modules are required in area 2 LPG boiler BOILER
6061 LPG Boiler PLC Module 16DI/16DO Nos 1 PLC modules are required in area 2 LPG boiler BOILER
6061 LPG Boiler Power supply Main CPU Nos 1 PLC modules are required in area 2 LPG boiler BOILER
6061 LPG Boiler Servomotor Nos 1 PLC modules are required in area 2 LPG boiler BOILER
6062 Helper for Shutdown Work Nos 2 S
Please provide a quotation to the following requirement from importer -
Product: FIREDOS spare parts
Specifications:
Sealing kit of Foam pump FIREDOS
Qty: 1 unit initially later on MOQ
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : United Arab Emirates
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Ginu Mathew
Buyer is interested to receive quotations for the following RFQ -
Product Name: Hyundai Spare Parts
Specifications :
Type: All Parts
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : India
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Abhay Kumar
Buyer is interested to receive quotations for the following RFQ -
Product Name: Machinery Engine Parts
Specifications:
caterpillar injector c9 c7
Scania HPI pump-injectors
Quantity: MOQ
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Poland
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Karol Dutkiewicz
The buyer would like to receive quotations for -
Product Name: Construction Machinery Parts
Specifications :
Model K3v112dt-1m4r-9c12
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Philippines
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Thirdie Agabao
Please quote for the following wholesale product requirement -
Product Name: Construction Machinery Parts
Specifications :
Type: Excavators, Trenchers, Loaders, Backhoes, Graders Etc.
Different Sizes
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Qatar
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Vinod Pillai
Please provide a quotation to the following requirement from importer -
Product Name: Machinery Engine Parts
Specifications :
Type: AC Machinery Engine Parts
WOLONG 3-Phase AC motor, TYPE: Y2-100L2-4E, 3 KW, 230VAC, 60 Hz, 1705RPM
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Philippines
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : -Jeffrey Calanoc
Please provide a quotation to the following requirement from importer -
Product Name: Construction Machinery Parts
Specifications :
Part Number: 10074769, 10078915, 10308220
Quantity: 1 Unit For Each ( 3 Units)
Quantity Required : 1 Unit/Units
Shipping Terms : CIF
Destination Port : India
Payment Terms : L/C
Looking for suppliers from : Europe
Contact : Ekdanta Engineering
Please quote for the following wholesale product requirement -
Product Name: Machinery Engine Parts
Specifications :
Type: AC Machinery Engine Parts
WOLONG 3-Phase AC motor, TYPE: Y2-100L2-4E, 3 KW, 230VAC, 60 Hz, 1705RPM
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Hong Kong, Philippines
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Jeffrey Calanoc
