White Super-High Strength Fast Setting Rapid Hardening High Belite Sulpho Aluminate Cement
These are white hydraulic binders (referred to as white super-high strength double-fast cement)with super-high strength, fast setting and rapid hardening properties, made from active (or inactive) mixed materials such as fast setting rapid hardening high belite sulpho aluminate cement clinker with low content of ferric oxide, moderate amount of gypsum (or industrial by-product gypsum), slag and other active (or inactive) hybrid materials with fine grinding, and the code is BS - WSF.
Specification
item
value
Warranty
1 Year
After-sale Service
Online technical support
Project Solution Capability
Others
Application
construction
Design Style
Contemporary
Model Number
White Super-High Strength Fast Setting Rapid Hardening High Belite Sulpho Aluminate Cement
Feature
Decorative
Type
Calcium sulfoaluminate cement
Hardening Feature
Extra Rapid Hardening
Heat of Hydration
Low-Heat
Strength Grade(Mpa)
42.5
INITIAL SETTING TIME
15mins
FINAL SETTING TIME
45mins
Technical Data:
Physical Properties:
Advantages:
1/ Fast setting, Rapid hardening, high strength; 4h compressive strength can reach 15Mpa, 102Mpa after 28d, suitable to make the
high strength products.
2/ Micro expansion, low dry shrinkage, the length change is very small. Dry shrinkage rate is just 1/8 of Portland cement.
3/ Have very good anti-corrosion property in sulfate, chloride, magnesium salt and seawater. Corrosion resistance coefficient 1.
4/ High impermeability, permeation height is 1/5 of Portland cement.
5/ High frozen resistance property, can get the strength of critical intensity of cold in 2h 3h.
6/ Low hydration heat release
7/ PH value is under 10.0 for GRC products.
8/ High whiteness value, the Hunter whiteness is above 75.
9/ Re-alkali resistant performance is good
10/ Can be mixed with Portland cement in a proper ratio, can greatly reduce the shrinkage of Portland cement, reduce the cracks.
Application area:
1/GRC
2/Decoration mortar
3/Interior and exterior wall putty
4/Artificial stone and floor
5/Decorative concrete
6/Building reinforcement
7/ HPC and RPC
8/Rush projects and constructions, projects in winter.
9/ High early strength Non-shrinkage grouts
one of the largest cement manufacturer in and also amongst the top exporter across the We have been into cement exports since decades for the OPC and White Cement.
We have now new development in White Cement Based Wall Putty. This is High Definition Wall Putty (HD Wall Putty) manufactured from White Cement and imported Polymers
Cement clinker is a solid material produced in the manufacture of Portland cement as an intermediary product. Clinker occurs as lumps or nodules, usually 3 millimetres to 25 millimetres in diameter.
Rockwool, also known as mineral wool, is an insulation material made from natural stone or mineral fibers. The density of Rockwool refers to the mass of the material per unit volume, and it is commonly expressed in kilograms per cubic meter (kg/m�³) or pounds per cubic foot (lb/ft�³).
The density of Rockwool can vary depending on the specific product and its intended application. Common densities for Rockwool insulation products range from approximately 40 kg/m�³ (2.5 lb/ft�³) to 200 kg/m�³ (12.5 lb/ft�³) or more. The choice of density often depends on factors such as thermal performance requirements, structural support needs, and the specific application of the insulation.
GFRP rebar is made of high-strength glass fibers along with a highly durable resin. These
products are developed as a superior alternative to steel in concrete reinforcement. It is
widely used to reinforcing concrete in applications where it is exposed to water, salt water
or chemical environments
- Typical Advantages:
- Non-Corrosive â?? It will not corrode when exposed to a wide variety of corrosive substances
- including chlorides
- High Strength-to-Weight Ratio â?? best reinforcement for weight sensitive reinforcement
- Non-Conductiveâ?? It is excellent electrical and thermal insulator
- Excellent Fatigue Resistanceâ?? performs best in cyclic loading solutions
- Impact Resistanceâ?? It resists sudden and severe point loading
- Magnetic Resistance â?? completely non-effective to electromagnetic fields; excellent for
use in electromagnetic testing facilities
- Light Weight easy to transport, no need for lifting equipment, easy to handle
