black fiberglass tissue can offer widest range of woven fabrics which are made of E-glass yarn. Our woven glass fabrics are manufacture with state of the art weaving technology and the best control over thickness, weight and strength.We can offers the materials engineer a wide choice of control fabric properties to satisfy design needs and objectives. Our extensive range of Fibreglass fabrics are globally recognised for its quality.
black fiberglass tissue with fire retardant and alkali-free performance, is suitable as a surface lamination for fiberglass wool and rock wool thermal insulation.
Fiberglass Reinforced Plastic grating is made by interlacing glass fibers and molded by
resin casting. With its many rectangular and square spaces, it provides two-dimensional
homogeneous mechanical characteristics.
The typical size of the product is - 1220 x 3660 mm. However, it is available in different mesh
sizes and thickness
- Advantages
- Easy to assemble
- High Load-bearing capacity
- Easy to install and maintain / repair
- Durable in harshest environments
- Suitable for ventilation and natural lighting
Fiberglass mesh is designed to reinforce concrete structures instead of conventional metal reinforcement.
It has the following advantages in relation to metal:
9 times lighter
3 times stronger
corrosion resistant
significantly accelerates the reinforcement process (knitting on the object is not necessary)
no need to put chairs
low thermal conductivity
Composite bars are connected to the network using a unique patented technology, which uses high performance automatic equipment. The joint is also a stool that forms a protective layer of concrete. For different rod diameters, the height of the stool is different.
The only restriction on the use of fiberglass mesh is the inability to operate at temperatures above 150 �° C, therefore, it is not recommended to reinforce structures that must meet special fire requirements: building floors of more than 3 floors, bridge columns, monolithic towers of more than 3 floors.
With this exception, almost the entire range of concrete structures remains:
Quick information
Place of origin: china
Description
Spray-up fiberglass roving
1.Spray-up processing
2.Coated silicon alkyl binder
Spray-up fiberglass roving
1. Usage and feature
Assembled roving for spray-up is used for fiberglass spray-up processing. It is coated silicon alkyl binder, soluble in unsaturation polyester and vinyl resin, especially be suitable for la
rge size product, easy removing air bubble, completing wet-out, good moldability and no springback. It is mainly used in manufacturing fiberglass boat hulls, sanitary fittings, storage tank, pipe, automotive parts and cooling towel etc.
Feature
Especially be suitable for spray-up vert
ical;
Good moldability and no springback;
Easy for removing air bubble;
Excellent cutting function.
2.Technical parameters
IdentificationDensity(%)Moisture content(%)Combustible content(%)Stiffness(mm)Net weight(kg)
Er13-24002400Less0.151.15,0.15130,2018,0.5
Er13-31003100Less0.151.15,0.15130,2018,0.5
Er13-48004800Less0.151.15,0.15130,2018,0.5
Price
Price condition : fobprice : usd.2 / sqm
Packaging & delivery
Packing :opp bag then plastic woven bag or cartondelivery lead time : 10-15 days after received advanced payment minimum order : 5000 sqmsupply ability : 70000 sqm per day
Ref: E6DR17-2400-386T for 9 289kgs
+ Ref: E6DR24-4800-386H for 9 166kgs
TAKE ALL - 20 pallets (25m3) - 18 000 $
EXW FRANCE (59)
Roving Direct is a single strand fiberglass filament yarn wound directly onto a spool without twisting.
directly onto a spool without twisting. The term "E Glass" refers to the composition of the glass, which is a type of silica-based glass containing boron oxide boron oxide, aluminium oxide and other oxides. E Glass Direct Roving is mainly used as a reinforcement in polyester or epoxy resin composites to increase their mechanical strength stiffness and durability. It is also used in the manufacture of fibreglass products such as boats, storage tanks, swimming pools body panels and reinforcement parts for construction.
Fiberglass rebar area of application
Fittings made of composite materials are a product of new technologies, the technical characteristics of which make it possible to successfully use it as an alternative to traditional steel fittings in construction of:
Foundation;
Marine and port facilities;
Reinforcement of concrete tanks;
Repair and strengthening of bearing capacity of brick and reinforced concrete structures;
Road slabs, airfield slabs;
For the production of small architectural forms;
For the road paving and decking of highway bridges;
The implementation of the infrastructure elements in the chemical industries;
Repair of damaged brick and reinforced concrete structures;
Fittings are used for constructions based on gypsum binders;
Construction of swimming pools and industrial pools;
The application of fiberglass fittings in civil and industrial construction is caused by many variables:
Low specific gravity;
High corrosion resistance;
Low thermal conductivity of composite materials;
High strength, several times the strength of steel fittings;
Is a dielectric;
Durability;
As known, the main drawback of traditional low-carbon steel fittings is a low index of corrosion resistance, which limits their use in the construction of marine facilities and constructions located in the zone of variable water level.
E-glass Also Known as Electrical Glass is the
Standard Glass Composition Used for Most Glass
Fibers. It is Made From the Oxides of Silicon,
Aluminum, Calcium, Magnesium, and Boron.woven Roving is a Bidirectional Fabric Made by
Interweaving Direct Roving. Woven Roving is
Compatible With Many Resins, Such as
Polyester, Vinyl Ester and Epocy Resins. Woven
Roving is a High-performance Reinforcement
And Widly Used in Processes Such as in Hand
Lay-up, Molding, and Pultrusion for the
Production of Boats, Automotives Parts,
Furniture, Sport Facilities and Other Frp
Products
