The Proven is a Proven Series Servo controlled stabilizer, that redefines the price performance ratio. Based on programmed logic circuit (PLC) technology. Servotech offers a whole new range of features. » Servotech Servo stabilizer provides perfectly stable output under severe conditions of unbalanced voltage/current, because of its unique conditions single phase or three phase, distortion less solid state motorizes voltage controller conserves variable energy. » No effect by any transient over voltage surge with fast correction speed (20V-55V per second) » Higher Power at lower cost: rating of 10KVA-1000KVA » Output voltage adjustable (110V output can also be provided) » No effect on load power factor & overall efficiency above 96% » Increased life of your equipment reduced heating and minimal losses. » Optional features include surge suppression, Hi/Low voltage cut off, overload protection, single-phase prevention and bypass mechanism. » Testing is computerized there by ensuring higher reliability.
Our products include drill collar, drill pipe, heavy weight drill pipe, stabilizer, subs, hole opener, roller reamer, casing scraper, key seat reamer, kelly valve, full opening safety valve, ft type drop-in check valve, fj type-arrow back pressurevalve, inside bop, float valve sub, by pass valve, cup tester, wear sub, circulating sub, cross over sub, reduce sub, saver sub, lift sub, different of drilling jar, fishing jar, shock absorber, bumper jar, oil jar, bumper sub, jar intensifiers, We also trade for drill bit and BOP, drilling rig......Include nearly all equipment you could see for oilfield drilling work.
Stabilizer 1 unit per box
Servo stabilizer.
Technical Specification Chart: Parameter 1 - Phase 2 - Phase 3 - Phase Unbalanced Air Cooled 3 - Phase Balanced Oil Cooled 3 - Phase Unbalanced Oil Cooled Energy Conserved Lighting Load Centralized Stabilizer for offices & residence Rating (KVA) 1 - 20 0.5 - 20 3 - 100 3 - 200 3 - 250 3 - 500 3 - 500 I/P Voltage range (V) 170 - 270 195 - 265 340 - 480 240 - 480 340 - 480 360 - 460 310 - 480 340 - 460 360 - 460 340 - 480 360 - 460 310 - 480 340 - 480 360 - 460 310 - 480 340 - 480 360 - 460 O/P Voltage (normal) 230 V 415 V 415 V 415 V 415 V 208 V LN 220 V / 230 V LN Alternate O/P setting 220 V / 240 V 380 V / 400 LL 220 V LN 220 V / 230 V LN O/P V regulation ± 1% of nominal output voltage O/P V Indications Digital voltmeter, accuracy 1% of FS ± 1 digit LED Indications Front panel LED Indicators, Input ON, output ON, Input high / Low, output High / Low trip Under over voltage trip Electronic cutoff circuit with graded time delay set @ + 5% / -10% of nominal voltage Over Load cut off Electronic cutoff circuit with graded time delay set @ 110% of rated full load current Short circuit protection HRC fuse / MCB at input Single phasing prevention Not applicable Provide Individual phase cutoff only Service bypass Not provided Provide upto 100 Kva. 3 phase Individual phase bypass provided up to 50 kVA 3-ph Resetting mode Automatic restart with time delay mode of 15 sec. (optional).
Technical Specification Chart Parameter 1 - Phase 2 - Phase 3 - Phase Unbalanced Air Cooled 3 - Phase Balanced Oil Cooled 3 - Phase Unbalanced Oil Cooled Energy Conserved Lighting Load Centralized Stabilizer for offices & residence Rating (KVA) 1 - 20 0.5 - 20 3 - 100 3 - 200 3 - 250 3 - 500 3 - 500 I/P Voltage range (V) 170 - 270 195 - 265 340 - 480 240 - 480 340 - 480 360 - 460 310 - 480 340 - 460 360 - 460 340 - 480 360 - 460 310 - 480 340 - 480 360 - 460 310 - 480 340 - 480 360 - 460 O/P Voltage(normal) 230 V 415 V 415 V 415 V 415 V 208 V LN 220 V / 230 V LN Alternate O/P setting 220 V / 240 V 380 V / 400 LL 220 V LN 220 V / 230 V LN O/P V regulation ¦ 1% of nominal output voltage O/P V Indications Digital voltmeter, accuracy 1% of FS ¦ 1 digit LED Indications Front panel LED Indicators, Input ON, output ON, Input high / Low, output High / Low trip Under over voltage trip Electronic cutoff circuit with graded time delay set @ + 5% / -10% of nominal voltage Over Load cut off Electronic cutoff circuit with graded time delay set @ 110% of rated full load current Short circuit protection HRC fuse / MCB at input Single phasing prevention Not applicable Provide Individual phase cut off only Service bypass Not provided Provide upto 100 Kva. 3 phase Individual phase bypass provided upto 50 kVA 3-ph Resetting mode Automatic restart with time delay mode of 15 sec. (optional)
Standard : Certified Company with IS-9815 & ISO 9001-2000 Frequency : 45Hz - 50 Hz AC Power Factor: Suitable for All Input: As Above Output : As Above Cooling : Air Cooled Type : Indoor Type Technology : Microcontroller and Buck & Boost;DimmerType Load: Unbalanced Construction: MS Sheet Body, Power Coated, Low Noisy Wave Form Distortion : Nil Correction Speed : 20-40V/sec Response Time : 10 m/sec Correction Method : Step less correction using Dimmer Control Circuit : Fully Microprocessor based circuit Efficiency : Better than 98% Duty Cycle : 100% Operation : Auto/Manual Load Loss : Less than 1 % Operating : -15 ¦C to 50 ¦C Servicing & Maintenance : Easley can be do by any technical known Person And from company side 24 hrs/ 7 Days Components Available : Easley available in market or in company .
Specification Size range: 8 1/2"~26" Material: AISI 4145H/AISI 4145H mod/AISI 4340/AISI4140-4142/non-mag material Forging process: Ingot---forging---heat treatment---rough machining---UT.MT---Q+T---inspection---finishing machining Heat treatment: Normalized / Annealed / Quenched / Tempered Hardfacing: HF1000, HF2000, HF3000, HF4000, HF5000
Specification Size range: 8 1/2"~26" Material: AISI 4145H/AISI 4145H mod/AISI 4340/AISI4140-4142/non-mag material Forging process: Ingot---forging---heat treatment---rough machining---UT.MT---Q+T---inspection---finishing machining Heat treatment: Normalized / Annealed / Quenched / Tempered Hardfacing: HF1000, HF2000, HF3000, HF4000, HF5000
Lake Petroleum supplies a complete line of downhole drilling stabilizers to increase rate of penetration and control hole deviation problems. All these stabilizers (including drill bit type, drill string type, spiral bladeilling, straight blade, integral blade, welded blade, sleeve-type, and stainless steel nonmagnetic types) are designed to meet the strictest quality control and quality assurance standards (API SPEC.). All alloy stabilizers are manufactured from AISI 4145H modified heat-treated steel for a wide variety of configurations and hole sizes.
