Material: fiberglass Application area: mainly used for the external fixation of fracture and common orthopedics. Model no.: ax005 (12.5cm*360cm) Size: standard or customized Package: 10bags*9boxes/ctn Characteristics: 1. High strength and light weight. 2. Quick solidifying and good mouldability. 3. Easy operating. 4. Excellent x-ray radiolucency. 5. Good air-permeability. 6. Water-resistant. 7. Environment friendly materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.280kg
Ansen casting tape consists of knitted fiberglass fabric and polyester fabric. It has the advantages of excellent x-ray permissibility, light weight, high strength, air-permeability, water resistance, comfort, hygienic and neat appearance to patients. Apply to orthopedics department, for connecting fracture part, fix swelling part or injured joint. We have various size and color for choose. 10bags/box, 12boxes/ctn, The carton dimension is 65*41*40cm
Orthopedic casting tape Enriched with polyurathane resin, our casting tape have good weight bearing strength & 3-4 min setting time, tact free roll down & smoothest finish. It is dipped in water, squeezed and applied for immoblization. Commonly used by orthopedic doctors. 12 - pieces packed in a small inner box. For small sizes. 10 - pieces packed in a small inner box, for 5". Outer/bigger box contains 10 small/inner boxes.
G&W is a company which produces all Cast & Splint applied to orthopedic surgery, and broadened its ground in the market by developing GR CAST & GR SPLINT for several researches & developments which are substantially different to the existing cast. Alpha Cast is the orthopedic fixed tape to make broken bones or damaged muscles cured by molding in the right position. -
Orthopedic Casting Tape Color Various Casting Tape Meet ISO 13485, CE, FDA This product is made of knitted fiberglass fabric or polyester fabric, and water-activated polyurethane resin. It uses environment friendly materials, and mainly used for the external fixation of fracture and common orthopedics. This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage. Fiberglass Casting Tape has higher strength and is easier to be cut than Polyester Casting Tape. Polyester Casting Tape can be burnt thoroughly, so it is more environmentally friendly. How to use: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, DIP in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Characteristics: High Strength. Light Weight. Quick Solidifying and Good Mouldability. Easy Operating. Excellent X-ray Radiolucency. Good Air-permeability. Water-resistant. Environment Friendly Materials. Clean and Comfort. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify.
is specializing in the production of medical consumables, established in 2012 with a registered capital of 30 million. The main products are absorbable surgical suture with needle Plain Chromic Catgut, PGA, PDO, PGLA, PGCL, etc., non-absorbable surgical suture with needle Silk, Nylon, Polyester, Polypropylene etc., suture materials, cassette sutures and surgical needle 300SS and 400SS Series, lifting threads for beauty, medical facial mask, orthopedic casting tapes & splints, plaster, IV cannula, polypropylene meshes and absorbable bone nails and so on.
Size: 5.1cm x 3.6m , 7.6cm x 3.6m , 10.2cm x 3.6m , 12.7cm x 3.6m Color: Purple,Red,Yellow,White,Light Blue Polyster Made: Korea Brand: Seven cast
Introduction Our orthopedic casting tape is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It's used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It's the upgraded and replaced product of the traditional plaster bandage. Our Advantages 18 years profesional manufacturer of Medical Orthopedic Fiberglass CastingTape FDA CE Certfication OEM your size and packing Various Colors for Choose 7-15 Working Days for Delivery Free Samples Offered for Test Features High Strength, Light Weight Molding Fast Good Air Permeability Excellent X-ray Radiolucency Waterproof Environmentally Friendly Simple Operation Size: AX002 5cm 360cm AX003 7.5cm 360cm AX004 10cm 360cm AX005 12.5cm 360cm AX006 15cm 360cm Storage Warranty: Be careful not to break the packaging Storage at room temperature Shelf-life: 2 years Shipping: within 15 working days after payment Certificates : CE FDA About us Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products: such as Orthopedic Fiberglass Casting Tape, Splint, also supply cast padding, stockinette, elastic bandage, crepe bandage,cohesive bandage, gloves and electric cast saw.
Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX003 (7.5cm*360cm) Size: standard or customized Package: 10bags*12boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.142kg
Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX006 (15cm*360cm) Size: standard or customized Package: 10bags*9boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.298kg
