Model no: fgm-rs-5 Fgm optical fiber geometry analyzer is a new product after ofm optical fiber multiparameter testing system developed by rayscience .It can be used to replace the expensive imported machine. The equipment is based on grey calibrate technique of eia/tia fotp176.It is a high-precision intelligent instrument consisting of advanced optical system , ccd camera, computer and so on . Perfect software has been designed to calculate precisely all data collected from the optical fiber near field figure. The instrument can obtain the boundary of fiber cladding and diameter of core, at the same time it can provide all the geometry parameters .Test result is precise and reliable.
David White Digital Eyepiece - DT8EP Digital eyepiece for the DT8-05 Series Theodolites. Can be used with the DT8-05P, DT8-05LP, and DT8-05LS.
Transformer oil acid tester is a fully automatic measuring instrument which adopts the extraction method to accurately detect the insulating oil acid value. This instrument can improve the working efficiency and test accuracy, and at the same time ensure the safety of the body by reducing the operator's contact with the samples and reagents. The acid value is the trace value of potassium sulfate that neutralizes the petroleum acid in 1g of oil, which contains a certain amount of inorganic acid and inorganic acid. The acid value includes organic and inorganic acids contained in the oil. In most cases, oil does not contain mineral acids. Therefore, the oleic acid value actually represents the content of organic acids in the oil. The organic acid contained in the new oil is mainly cyclonic acid. In the oil and in the process of use, the acid value of the oil produced by oxidation is an indicator to measure the degree of refining of the new oil. Whether the oil is running is an important indicator of the continued use of oil quality equipment. 2. Technical index: 1.Test range: 0.002 1mg KOH/g 2.Test error: 0.005mg KOH/g 3.Repeatability: 0.005mg KOH/g 4.Ambient temperature: 10 45 5.Relative humidity(RH): 85%RH 6.Voltage supply: AC220V/50Hz 7.Power: 50W
Lab Equipment
CUVETTES Item No. C1011, Description of Goods: Holl ACE , Packing 2000pcs*12bags, Item No. C1013, Description of Goods: American M10, Italy BT2245 Biochemical Apparatus , Packing 2000pcs*10bags, Item No. C1014, Description of Goods: American Kangning 560, 550 Series , Packing 2000pcs*9bags, Item No. C1015, Description of Goods: American M10, Italy BT2245 Biochemical Apparatus, Packing 1000pcs*10bags,
CUVETTES Item No. C1020, Description of Goods: Kodak Sample Cup , Packing 1000pcs*12bags, Item No. C1021, Description of Goods: Baolingman Sample Tube , Packing 5000pcs*8bags, Item No. C1022, Description of Goods: Kodak tip , Packing 1000pcs*40bags, Item No. C1021-1, Description of Goods: Baolingman black pipette tips , Packing 1000pcs*20boxes, Item No. C1021-2, Description of Goods: Roche Tip&Cup , Packing 6boxes/bag*8bags, Item No. C1021-5, Description of Goods: Roche Tip (with box) , Packing 120boxes, Item No. C1021-6, Description of Goods: Roche Tip (with box) , Packing 240boxes, Item No. C1011, Description of Goods: Holl ACE , Packing 2000pcs*12bags, Item No. C1013, Description of Goods: American M10, Italy BT2245 Biochemical Apparatus , Packing 2000pcs*10bags, Item No. C1014, Description of Goods: American Kangning 560, 550 Series , Packing 2000pcs*9bags, Item No. C1015, Description of Goods: American M10, Italy BT2245 Biochemical Apparatus, Packing 1000pcs*10bags,
Gel and Clot Activator Tube aims to obtain high quality serum specimen for biochemistry , immunology and serology tests in clinical inspection. Inside the tube there is some gel present at the bottom, which is a pure substance and is very stable in physico-chemistry properties. Otherwise, the gel can avoid high- temperature decomposition and small molecules precipitation, hence it greatly reduces the risk of testing equipment clogging.
Easy-to-Read Color Chart Each strip measures concentrations between 10-200ppm (parts per million), with color matches at 10, 50, 100 and 200ppm. The distinct color chart and accurate, reproducible readings give an immediate response for quick and easy use. Meets Requirements Federal, state, and local health regulations require users of chlorine-based sanitizer solutions to have appropriate test kits available to verify the strength of sanitizer solutions. This kit meets those requirements. Easy to Use The distinct color match at each full unit makes it easy for the user to detect exhaustion of solutions that should be replaced. It also helps avoid the use of excessive amounts of sanitizing agents, to avoid wasting product! Simply remove a strip from the vial, dip the strip into the sanitizing solution, blot with paper towel, then instantly compare the resulting color with the color chart. Accurate Sanitizer solutions are essential in the food service industry. These strips ensure that those sanitizers are at the proper concentration. For accurate results, store these test strips away from areas with high humidity or where they may be exposed to water before use, as those conditions may compromise results. dditional information Weight 0.03 lbs Quantity 1/Each Type Chlorine Test Strips Package Size 100 Pieces Test Level 10 â?? 200 PPM
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be canceled off of the order or returned once it is placed. Additional information Weight 0.14 lbs Quantity 50/Pack Type Water Test Strips Test Level 10 PPM (Free Chlorine) 10 PPM (Total Chlorine) 240 PPM (Total Alkalinity) 425 PPM (Total Hardness)
PERSONAL AIR SAMPLER INTRODUCTION THERE IS A CHANCE THAT WORKERS AT MANY INDUSTRIAL AND CONSTRUCTION SITES WILL BE EXPOSED TO HAZARDOUS DUST, VAPOURS, AND GASES. SINCE INHALATION IS TYPICALLY THE MOST MAJOR ROUTE OF ENTRY INTO THE BODY, IT IS CRUCIAL TO PAY CLOSE ATTENTION TO THE AIR THEY ARE BREATHING. IN GENERAL, WE USE A SAMPLE PUMP TO EXTRACT A KNOWN VOLUME OF AIR THROUGH AN APPROPRIATE SAMPLING MEDIA. FILTER PAPER OR OTHER SUITABLE SOLID MEDIUM WOULD BE USED FOR PARTICLES AND FUMES, AND A SORBENT TUBE, OR PERHAPS AN IMPINGER OR BUBBLER, WOULD BE USED FOR GASES AND VAPOURS. WITH THE SAMPLER SITUATED IN THE BREATHING ZONE, A TYPICAL SAMPLING TRAIN FOR PERSONAL MONITORING WOULD RESEMBLE THIS; Gas sampling bags, like Tedlar bags, are used for collecting samples of gases. Moreover, background exposure can be measured using passive or diffuse sampling methods. They are sealed badges that are sampled, worn on the individual for the specified amount of time, sealed, and then sent off for analysis. To enable hands-free sampling of inhalable gaseous pollutants and particulate matter in the air actually breathed by the person at work, Personal Air Sample is a battery-operated tiny air sampler that may be fastened on to a person. Uses include: monitoring fugitive gas emissions in the workplace, workplace air quality, and workplace monitoring. They are also used in places of employment for businesses in the chemical, paint, cement, sugar, and other industries. Features of the physical design include a holder for the sampling medium, a suction pump, a flow measurement device, a flow controller, and a battery for each personal air sampler. For sampling of dust or particles, a suitable filter that has been placed in a filter holder serves as the sampling medium. An adsorption tube that is filled with pollutant-specific adsorbents like activated charcoal, tenax GC, etc. serves as the medium for sampling gases and vapours. The filter or the adsorption tube must be the only one of the two media being utilised at once. The suction needed to draw air through the sampling media is provided by a low power diaphragm type suction pump. A large capacity rechargeable Li-ion battery powers it. A tiny rotameter that has been carefully built can measure flow.A ball valve, a needle valve, or an electronic circuit can be used to control flow. A battery-operated model with a rechargeable battery is one of its key features. Used to monitor the air quality in workplaces or on shop floors. Small and Lightweight, weighing under 500 grammes To assess TLV exposure, the filter holder or adsorbing tube can be held at the level of inhaling. May be worn by the user Model that is lightweight, convenient, and reasonably priced.
