This battery pack with intelligent BMS,using a precise battery structure and high quality power lithium cells,is a long life,low risk,safe electric bike battery. Specification Name: E-bike battery pack Voltage: 48V Capacity: 24000mAh Operating temperature: -20~60 Feature 1,Long cycle life: The battery capacity is not less than 85% of the rated capacity even after 2000 times' continuous chargement and dischargement. 2,No memory effect: LiFePO4 battery can be charged and discharged at any time. 3,Safe: With overcharge and overdischarge protection,PTC resistance protection and explosion protection. 4,Environment friendly: can pass MSDS,CE,CCC,UL...certification. 5,Service: supply OEM customization service,short delivery time. 6,Applications: Electric bicycle,two-wheel/three-wheel electric car,low-speed car.
LiFePO4 full named Lithium iron phosphate battery,which uses lithium iron phosphate as the anode material.Because the combination of element P and element O is quite stable,even if the internal heat caused in the battery,its crystal structure is very difficult to break,then it's difficult to occur thermal shock phenomenon, is a very safe battery. This 48V 100Ah LiFePO4 battery used hundreds of little LiFePO4 cells,assembled in a battery pack with BMS.It's specially designned for storaging energy,like base station. We support OEM/ODM customization,if have needs,please feel free to contact us.
Lithium iron Phosphate battery(LiFePO4),with safe,powerful,long lasting advantage,has become one of the primary cell choices for top manufactures of different fields,such as portable product,UPS,solar,EV,medical equipment and so on.Many applications using sealed lead acid(SLA)are upgrading their battery power with a "drop in replacement"LiFePO4 battery.LiFePO4 battery packs are extremely powerful,capable of providing high discharge rates even at elevated temperature.Safety is improved over ther lithium ion chemistries due to its thermal and chemical stability.Battery packs are capable of providing 2000+ cycles,promotes longer usage in devices. This 25.6V 40Ah battery pack is widely used in AGV cars. Also support customization.
LiFePO4 batteries are very commonly used in today'solar light,storage system and consumer electronics,have a very long shelf life,can be recharged up to 2000 times.And LiFePO4 batteries have no memory effect,can be charged at any time,do not need to be fully discharged before charging. Specification Cell Configuration:cylinder Nominal Capacity: 6000mAh Mimimum Capacity: 5950mAh Internal Impedance: 25mΩ Nominal Voltage: 3.2V Discharge Cut-off Voltage: 2.0V Charge Cut-off Voltage:3.65 V Charge Method: CC/CV Standard Charging Current: 1000mA Standard Discharge Current: 1000mA Fast Charging Current: 6000mA Max Discharging Current: 18000mA Maximum Continuous Charge Current: 1C Maximum Continuous Discharge Current: 3C Dimensions(mm):32.5mm (dia.)*65.5mm(ht.) Weight:150 g Charge Temperature Range: 0°C~45°C Discharge Temperature Range: -10°C~60°C Storage Temperature Range:Less than 1 year:-20~25°C,Less then 3 months:-20~40°C Cycle Life (80% DOD): 3000 cycles Features * High quality * Factory price, fast delivery * Long cycle life, No memory effec * High safety, environment friendly * High working voltage for single battery cells * Widely application for electronics and industries
Name: All in one solar street light battery pack Cell model: LFP26650 LiFePO4 cell Combination mode: 4S5P Nominal voltage: 12.8V (support customization,such as 3.2V,6.4V,9.6V,12.8V,16V,24V,etc) Cut-off voltage: 14.6V Nominal capacity of single cell: 3.2Ah Battery pack capacity: 16Ah Minimum capacity: 15.5Ah Size of single cell: 26*65mm Battery pack size: 275*135*30mm(can be customized) Charging method: CC CV Charging current: 0.2C Continuous discharge current: 3C Storage temperature: -20~45 Operating temperature: -20~60 Weight: approx 2KG Application: solar street lamp,medical equipment,industrial equipment,energy storage backup power,outdoor backup power,communication base station,etc.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
Product advantages: ï?¬All-in-one design, high integration and space saving installationï¼? ï?¬Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 yearsï¼? ï?¬Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics Built-in BMS management system with comprehensive protection and monitoring control functions 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable BMS battery management system, with SOC automatic calibration and high current passive balance function, combined with perfect operation control and management strategy, to achieve accurate and efficient management EMS energy management system, BMS with solar controller/AC charger, inverter centrally manages charge and discharge, effectively controls the charge and discharge current within the cell usage conditions, protects the cell and extend its service life
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.