Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Section 1. Thin flakes introduction 1. Product description: thin pliable colorful flakes is made through high-temperature special treatment using special polymer resins, inorganic raw materials and imported additives. It dose not fade, and it anti-aging and anti-cracking. 2. Product use: for all kind of interior and exterior wall decorative paint, integration product, insulation board surface layer etc. 3. Product features: 3.1. Thin, lightweight, easy to blend (lightweight, less dosage, strong spraying texture) 3.2. Flexibility, not easy to agglomerate in long-term storage(no need to soak, can be stirred at a speed, not fragile, easily solve the problem of color mixing of water-water painting), with excellent stability. 3.3. Mature production technology, normal equipment, easy to mix , do not fade , with high resemblance to real stones. 4. Product appearance:1-8mm irregular flakes(dry flakes) 5. Specifications:large-sized (1-8mm), medium-sized (1-5mm), small-sized (1-3mm) 6. Thickness: 0.05-0.10mm 7. Color: as exemplified on color card (cab be modulated according to customers needs) 8. Thin pliable colorful flakes completely solve all ill of the water-in-water multicolor paint. Water-based emulsion+thin pliable colorful flakes=multicolor rock flakes granite coating. The decorative effects can be fully comparable to that of granite and marble. 9. Storage: store in a dry room with temperature of 5-35?. 10. Safety: non-hazardous products.
Supplier: All kinds of durable, decorative & protective exterior & interior paints
Buyer: All kind of iron oxide & pigments
Paint Design-special Effect-feature Wall Paint Color Patterns
Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors Size 1 litre 5 litres 15 litres Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors. The product quickly and safely removes a wide variety of paint systems, e.g. air-drying epoxy paints, polyurethane paints, NC paints (nitrocellulose paints), acrylic paints, dispersions, wet primers and most conventional paints and corrosion protection primers. Winstrip-Gel KSG600 is ideal for stripping paint and stripping all types of wood and metal, such as aluminum, zinc, iron, etc. It is also suitable for non-ferrous metals such as copper, aluminum, zinc, bronze. The paint stripper is used for spray hooks, engine parts and for vehicles, trucks, car chassis, in boat building and for steel structures, etc. Winstrip-Gel KSG600 is safe to use and hardly drips on vertical surfaces or overhead due to its good thixotropic properties Weight 4.93kg Size 1l, 5l, 15l
Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Size 750ml 5kg Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Zapon varnish is a colorless, non-yellowing protective coating for all bare iron and non-ferrous metals. The original appearance of the surface is not changed.
Winstrip A2 KNG 300 pasty from Winoil is a ready-to-use, pasty paint stripper that is used to remove paint and adhesives Size 1 litre 5 litres 15 litres The product is suitable for both indoor and outdoor use. It dissolves practically all coatings and adhesives such as oil paints, synthetic resin, nitro, dispersion and stoving varnishes, 2-component and powder coatings as well as 2-component adhesives. It can be used on most surfaces, e.g. stone, wood, metals, etc. Plastic and rubber surfaces (PE, HPE, PP, PVC and natural rubber) can also be stripped/stripped, but preliminary tests are recommended. Weight 1 kg Size 1l, 5l, 15l
Size 1 litre 5 litres 15 litres Winstrip KSG 650 paint stripper paste â??PH 1-2 extremely strongly acidicâ?? KSG 650 is a multifunctional thixotropic cold paint stripper based on solvents. It is ideal for stripping wood materials. Also ideal for all types of metals and non-ferrous metals. Due to its thixotropic properties, it is suitable for vertical or upside down surfaces. Size 1l, 5l, 15l