(insoluble sulfur)ot20 (is-hs-7020 highly thermal stability) Technical specification Appearance: Yellow powder (non-flying) Sulphur content (%): 80.0ía1.0 Insoluble sulphur content (% min.): 72 High temp. Stability (% min.) (105íµ*15min): 75 Oil content (%): 20.0ía1.0 Acid content (as h2so4), % max.: 0.05 Heating loss (60íµ*2h), % max.: 0.40 Ash, % max.: 0.15 Fineness(100mesh), % min.: 99.8
Product name: insoluble sulfur Cas no.: polymeric sulfur: 9035-99-8 Hs insoluble sulphur had been widely used in natural rubber and a variety of synthetic rubber. They are made with tire and rubber products such as: rubber belt, rubber pipe and sealants etc. They are specially used in radial truck tire making. Product standard: (enterprise standard) q/320206gad03-2008 Rubber vulcanizing agent Insoluble sulfur can improve the resistance to both fatigue and ageing of all kinds of rubber products. It is used as the best vulcanizing agent for rubber. And it is widely used in the manufacture of the rubber chemistry such as tire, rubber pipe, shoes, cable and wire, insulating materials, latex, and all kinds of automobile rubber parts, especially for radial tires. Technical specification Appearance: yellow powder (non-flying) Sulphur content (%): 66.0-68.0 Insoluble sulphur content (% min. ): 90.00 High temp. Stability (% min. ) (105 degree*15min): 80 Oil content (%): 19.0-21.0 Acid content (as h2so4), % max.: 0.05 Heating loss (60 degree *2h), % max.: 0.40 Ash, % max.: 0.05 25
Rubber Adhesive RA/HMMM Property: This product is the improved product of Rubber Adhesive A. The appearance of this product is one kind of white powder and gives off methanal upon heating. It is hypo-methanal donator among double functioning adhesive system for rubber Specification Appearance: White powder Ash Content (850íµ), % : 30í½38 Moisture content (Boiling Evaporation Method) í_4.5 Sieve Residue (325 mesh wet-method), % í_0.3 Free formaldehyde, % í_0.1 Application: This product is used in binding Rubber with steel wire, Nylon, Rayon, fiberglass, etc. In using this product, simply mix it directly into Rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with Rubber Adhesive RS, Rh, RE, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. Packing: Packed in compound plastic bag, 25Kg per bag. Keep in cool and dry while storage and transportation, strictly avoid damp. Packing:Packed in compound plastic bag, 25Kg per bag. Keep in cool and dry while storage and transportation, strictly avoid damp.
Rubber Vulcanizing Agent (Insoluble Sulfur)OT20 (IS-HS-7020 highly thermal stability) Technical Specification Appearance: Yellow Powder (Non-flying) Sulphur Content (%): 80.0í+1.0 Insoluble Sulphur Content (% min.): 72 High temp. Stability (% min.) (105íµ*15min): 75 Oil Content (%): 20.0í+1.0 Acid Content (As H2SO4), % max.: 0.05 Heating Loss (60íµ*2h), % max.: 0.40 Ash, % max.: 0.15 Fineness(100mesh), % min.: 99.8
Packing and storage: OT20 is packed in a25 kg bag with PE lining and stored in a ventilated cool, dry place under normal conditions. Storage temperature should be less than 40íµ. Keep away from a fire heat and moisture. It cannot be stored together with amine and alkalescences, preventing blocking from stacking. Guaranteed storage is half a year. Packing: Packing and storage: IS7520 is packed in a25 kg bag with PE lining and stored in a ventilated cool, dry place under normal conditions. Storage temperature should be less than 40íµ. Keep away from a fire heat and moisture. It cannot be stored together with amine and alkalescences, preventing blocking from stacking. Guaranteed storage is half a year.
Supplier: Insoluble sulphur
Buyer: Naphthenic oil
Rubber adhesive ra-65(hmmm) Property: this product is the improved product of rubber adhesive a. The appearance of this product is one kind of white 3 Free formaldehyde, % ≤ 0.1 Application: this product is used in binding rubber with steel wire, nylon, rayon, fiberglass, etc. In using this product, simply mix it directly into rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with rubber adhesive rs, rh, re, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. Packing: packed in compound plastic bag, 25kg per bag. Keep in cool and dry while storage and transportation, strictly Standard
Supplier: Insoluble sulphur, HMMM, Masterbatch
Granular sulfur is the raw material state of sulfur. Granular sulfur consists of� small yellow particles that quickly disperse or break down in the soil. Its physical form is solid, and as expected, it has a sulfuric odor. The material is soft, easily crumbles, and is insoluble in water, although it does dissolve in some organic solvents such as carbon disulfide. It is sulfur that has been taken from the refinery or extracted from the mine and has not been processed. Sulfur can be found in pure form in nature, as well as in combination with other elements. Granular Sulfur is the unprocessed commercial name of the element Sulfur, that is, sulfur with its well-known name. Due to its physical condition, Lamp is the general name used for Sulfur, which is also called chips. Granular sulfur in agriculture, due to the hardness of its structure, oxidation is impossible, it can be used by making it powdered or micronized by physical interventions. In addition, such products are also called Granular Sulfur due to the fact that Powdered or Liquid sulfur can be mixed with other components to make it granular. Granulated sulphur is� mainly used in the production of sulfuric acid, phosphorus fertilizers, plant protection chemicals, paper, food industry, agriculture, auto tires, explosives, chemicals and dyes, wastewater treatment, such as wastewater treatment also finds a wide range of uses and in the steel industry. Granulated sulphur is used in the manufacture of sulfuric acid, phosphate fertilizers and plant protection products, and in the steel industry.
