We supply 25mm, 26mm Plain Particle Boards for filling inside the doors. 2440x1220x26mm plain particle board shall weigh about 40kgs. We do particle board starting 9mm to 40mm and above for various purposes like lamination grade fully sanded on both faces, for routing purpose, furniture backing etc. 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded, suitable for Fire door -tested to BS standard We can also adjust the density of board as per our customer requirement. Our plain particle boards are priced competitive. Please contact us for more details.
We Are Indonesia MDF Board MANUFACTURER ## Made from Mix Hardwood Fiber ## Density 720kg-800kg ## Flat and smooth surfaces by well sanded ## Sanding paper number 240 ### High density ***** Usage Furniture components - Decoration ## Housing components ## All sizes available ## Special required sizes can be made ## MOQ 24 cbm in 20ft ## Price range depend on sizes from usd 150/cbm - usd 230/cbm FOB Indonesia main port ## Payment term by Bank transfer 30% Deposit and 70% balance agaist copy of BL only , No L/C accepted due to high Banking cost
MDF Board ***** Flatt and Smooth surfaces by well sanded *****or MDF Melamine faced ***** Core made from Mix hardwood Fiber *** High Density vary from 720kg - 820kg /m3 depend on thickness *** All sizes available by demand *** usage : Housing components - Furniture components - Carving purposes **** MOQ 40 m3 in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released *** or 50% Deposit and 50% Balance after received container in buyer ware house and checking quality ***** No L/C accepted due to high Banking fee & Complicated procedures
Indonesia Origin MDF Manufacturer and Exporter ***** MDF Board Thickness from 2mm t0 25mm x 1220mm x 2440mm 0r 1830mmx3660mm ***** Flatt and Smooth surfaces by well sanded ***** made from Mix hardwood Fiber *** High Density vary from 720kg - 820kg /m3 depend on thickness *** All sizes available by demand *** also available Melamine face MDF ***** usage : Housing components - Furniture components - Carving purposes **** MOQ 48 cbm in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released *** No L/C accepted due to high Banking fee & Complicated procedures
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
We supply: 1. Okume face and Okume back ,hardwood, Combi core MR-AA Grade Face,AA Grade Back in thickness 9mm,12mm,18mm 2.Okume Face and Canarium Back, hardwood combi core MR- A Grade Face , A Grade Back in thickness 9mm,12mm,18mm 3.Okume Face and Okume Back, Eucalyptus core MR+15% Melamine- AA Grade Face , AA Grade Back in thickness 9mm,12mm,18mm 4. Okume Face and Canarium Back, Eucalyptus core MR+15% Melamine - A Grade Face , BGrade Back in thickness 9mm,12mm,18mm We also can do plywood as per customer requirement.
We supply (Garjun) Keruing plywood with 100% core (Garjun)Keriung, face and back (Garjun)Keriung 1220*2440 in thickness 6mm,9mm,12mm,15mm,18mm... Grade: AA/AA Both sides SANDED. Glue: Melamine and MR
We supply Film Faced Plywood ( Shuttering Plywood) with Original Dynea film red brown, brown film (40/128 grade), 30kg, densified Film Faced (15mm to 12mm),11 ply, 12mm thickness (+/- .5mm), 10-15times repetition, 72Hours WBP Glue (Phenol Formaldehyde). Hot press-40minute heating and cooling cycle. Rubber wood + Poly core: 30Kg: Rubber wood + Full core: 30Kg: Eucalyptus + Full core: 38Kg: Benefits: more usages, more load bearing, less scaffolding, save on labor cost. Origin: India, China
