Valves fittings Ball valve, one piece design, ends-npt, bsp, size up to 1", pressure rating-3000 psig (200 bar) Needle valve, forged body ends-sw, npt, tube connection, size up to 1/2", pressure rating- 5000 psig. Manifold valves- 2 way/ 3way / 5 way straight or 't' type. Tube fittings- double compression type size up to 1/2" Pipe fittings- as per ansi b16.11 & ansi b16. Material for all- ss 316, monel, carbon steel. Standard lot size
-Ball Valve With Inbuilt Strainer - Ball Valve -Butterfly Valve -Gate Valve -Multi-Purpose - Gas Ball Valve -Bronze Strainer
We can produce various valve fittings with lost wax casting technology.The materials are steel,stainless steel,alloy steel.
Butterfly valve Hand-operated worked on 70-degree temperature under 30 bar we offer the best solutions in the following sectors (constructions, swimming pools, irrigation systems, and food and water treatment plants in all forms, gas, and petroleum).
Technical Data Introduction Refrigerants Shut off valves are applicable to all common non-flammable refrigerants including R717 and non-corrosive gases/liquids dependent on sealing material compatibility. For further information please see installation instruction for CSVA. These Shut off Valves are used in the Industrial Refrigeration system. Temperature range Standard version : - 46/+150�°C Pressure range shut off valves are designed for max, working pressure CSVA-2 DN-15 to DN-40 : 25 bar (362 psig) CSVA-4 DN 15 to DN 200:40 bar (580 psig) Features Housing Made of special, cold resistant steel. Valve cone Shut off valves cone can be turned on the spindle, thus there will be no friction between the cone and the seat, when the valve is opened and closed. Spindle Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged. Sealing Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing. Design Housing Made of special, cold resistant steel. Connections Available with the following connections: - Butt-weld ANSI DN15-40(B 36.10 Schedule 80) Butt-weld ANSI DN 50(B 36.10 Schedule 40) Butt-weld ANSI Socket weld (ANSI B 16.11) - DN 15 - 40 % -1% in.). Valve Cone Spindle Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged. Sealing Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing.
Industrial valves and pipe fittings
Advantages For 'mass' single and double compression tube fitting All fittings shaped out of high quality forging. Double ferrule swaging action. Self-alignment. No transfer of torque to tubing. Compensating seal action to accommodate temperature and pressure variations. Universal tubing compatibility. Low torque, high purity "silver" thread coating on nut. Minimum flow restriction. Will not weak on tube wall. Fittings are tested for high pressure hydraulic, pneumatic, impulse, vibration and temperature to ensure safety and leakproof joints. Size range:-1/16"to2"and 3mm to 50mm. Material of construction stainless steel of all grades and all special materials. For 'mass' needle valves Single piece forged body or bar stock construction. Union bonnet or screwed bonnet connection Metal to metal or stellited seat for high pressure, teflon seat for low density gases and non lubricating fluids. Hard plated or stellited tip, non-rotating tip steam. Teflon seatorgrafoil packing for bubblefreejointat various temperature. Variety of end connection includes 1/8" to 1"od single and doubleferrule fittings, 1/8" to 1" male, female, npt, sp, jis, iso and din pipe ends. Optional bleed plug provided for drainage of residual fluid. Pressure range: 3000-10000psi at 120 500 degree centigrade Din valve for european standard For 'mass’ ball valves 'mass' ball valves are very compact, low torque design with panel mounting facility Two way on-off service, three and four way for switching of the stream & five way for selection of the stream All valves are made in ss and brass in sizes 1/4", 3/8" and 1/2" npt, bsp, sw and bw male and female
Pvc fitting ball valve PVC ball valves, butterfly valves, pipes and other fittings are made with demestic and overseas high quality material. Our products have the advantages such as corrosion resistance, ageing resistance, rustlessness, innocuity, smell-lessness, high pressure resistance,lightness and convenient operation, etc. box,cartoon (plain, color)
Brass/ bronze/lead free ingots and rods Oem valves and fittings Oem water meters and fittings
Instrument Fitting - Valve & Pressure gauge
