Specifications:
Modified (cylinder Or Rectangular Or Cube Or Modular)
-22.5m³ Tank 4 2 X Water Collection Tank 1 X Balance Tank
1 X Grease Trap Balanace Tank 22.5 Kl Flat Bottom Water And Grease Storage Tanks
Pressure = Open To Atmosphere
Material Of Construction = Carbon Steel
Coat Epoxy - External Only
No Internal Coating
Approx. Dimensions = 2.8m Diameter X 4m Tall
5 X Nozzles
1 X Access Point 500mm
1 X Vent Pipe
50m³ Tank 4 2 X Oil Receival Tank
2 X Oil Grease Storage Tank 50 Kl Flat Bottom Oil And Grease Storage Tanks
Pressure = Open To Atmosphere
Material Of Construction = Carbon Steel
Coat Epoxy System - External Only
No Internal Coating
Approx. Dimensions = 3m Diameter X 8m Tall
5 X Nozzles 1 X Access Point 500mm
1 X Vent Pipe
50m³ Conical Tank 2 oily Water Heating Tank, Steam Jacket Equiped 50kl Conical Oily Water Heating Tank Vertical
Pressure = Open To Atmosphere Material Of Construction = Carbon Steel
No Internal Coating
Approx. Dimensions = 3m Diameter X 6m Tall 20 Degree Base Cone
5 X Nozzles
1 X Access Point 500mm
1 X Vent Pipe
1 X Steam Jacket
100m³ Tank 5 2 X Oily Water Receival Tank
3 X Grease Trap Receival Tank 100 Kl Flat Bottom Waste And Receival Storage Tanks
Pressure = Open To Atmosphere
Material Of Construction = Carbon Steel
No Internal Coating
Coat Epoxy System - External Only
Approx. Dimensions = 3.8m Diameter X 10m Tall 5 X Nozzles
1 X Access Point 500mm 1 X Vent Pipe
100m³ Corrosion Resistant Tank 2 2 X Trade Waste Discharge 100 Kl Flat Bottom Waste And Receival Storage Tanks
Pressure = Open To Atmosphere
Material Of Construction = Carbon Steel
No Internal Coating
Coat Epoxy System - Internal And External
Approx. Dimensions = 3.8m Diameter X 10m Tall 5 X Nozzles
1 X Access Point 500mm 1 X Vent Pipe
Please quote for the following wholesale product requirement -
Product Name: Centrifugal Pump
Specifications:
MNBG567-MJHTG45BF56 PUMP can operate on suction lifts to 7.5 metres and can deliver pressures to
165m. They are able to transfer mildly contaminated water, cooling water, emulsions,
oils, and fuels such as kerosine, petrol and diesel.
Pump use an integrated jet pump to provide a fast priming function, and
they can be supplied as close or long-coupled configurations.
These self-priming pumps are available in Cast Iron, All Bronze, or All Stainless Steel
[depending on model] enabling them to pump corrosive fluids including seawater.
Advantages include:
Self Priming to 7.5 metres
All Iron, All Bronze and All Stainless Steel construction
Flows to 83 l/s
Heads to 165m
Low NPSH values
High efficiencies for reduced power consumption
Axial thrust-free, open or load-relieved closed impellers
Handle temperatures from -40 °C to 90 °C
Viscosity up to 115 cSt
Single and double mechanical seals availabl
Qty: 38 pcs
