MJSD-2 Paperboard Cutter Machine (Light model) Introduction MJSD-2 Series Rotary Die-Cutting Machine (Light model) is used for the transverse and vertical cutting of the paperboard as customer¡¯s requirement. The machine use chain model drive, have big turning moment. The machine has reasonable structure, the cutting precision is high and adjust is fast. The machine is electromagnetism speed adjust, continuous feeding, mechanical control, it can work together with the single facer machine as single facer line for producing the 2-layer corrugated paperboard. The knives quantity can be required by the customer. Transversely cut 400-2400mm. Technological Parameters Model MJSD-2-1700 MJSD-2-2000 Max. Cutting width. 1700mm 2000mm Cutting length 200-2000mm 200-2000mm Cutting times 20-120times/min 20-120times/min Cutting thickness 2mm 2mm Power 3kw 3kw Working Speed 0-70m/min 0-70m/min Machine Size 2250*1400*1300mm 2750*1400*1300mm Weight About 1500kg About 1700kg
Specifications: Working area: 900*600mm(35.43*23.62inch) Laser power: 60w/80w/100w/130w/150w Laser type: Sealed CO2 glass laser tube Control system: DSP control system Work platform: Honeycomb platform Pass-thru doors: Allow to cut extremely long materials Interface: USB connection Memory: 64Mb Buffer Memory Driver system: Stepper motor Auxiliary equipments: Exhaust-fan, air-exhaust pipe Laser Tube life hours: 10000hours Repeating precision: ±0.05mm Moving system: CNC controlling units Cooling mode: Water-cooling and protection system Max speed: 600mm/s Working voltage: AC110/220±10% 50/60Hz Whole power:
This wrapping/packaging paper machine is designed for both single and double layers. It comes in a variety of models, including the 1092 type, 1575 type, 1760 type, 1880 type, 2100 type, 2400 type, 2880 type, 3200 type,3600 type,4200 type and 4800 type. The number represents the machine deckle. It can also be equipped with a relevant device, according to paper grammage, machine speed, output, and other parameters. The main equipment: 1. Pulp-flowing box: It adopts open-type pulp-flowing box, consisting of pyramid tube, staircase diffuser, distributing roller and box body. Staircase diffusion orifice plate pulp distributor is three-stage diffusion, which made of organic glass and upper and lower lip plates made of stainless steel. The upper lip plates can do full and local adjustment is three-stage diffusion. 2. Fourdrinier part: Wire table is 18000mm. Except draw-out seat made of alumina alloy, table rack is all welded by section steel with 1.5mm stainless steel cladding. Wire part is mainly composed of chest roller, forming board, wire-driving plate, water scrapping board, moisture absorbing box, and vacuum water-absorbing box, vacuum roller, wire-driving roller, electrical wire-tighter, pneumatic corrector, constant-tension wire-tighter, incision needle and margin raising device. 3. Press part: It adopts vacuum absorption injection paper, one streak of vacuum pressing and three streaks of pressing. 4. Drying part: It is set 28 pieces of f1500mm drying cylinders, including one f3000mm big cylinder of array type, 6+6+8+1+glueing machine+8 driven by enclosed gear box and lubricated by sparse oil. 5. Driving and control part: It adopts AC frequency conversion speed, drive step by step. Hard tooth surface gear box connected by universal coupling is used, and entire digital closed circle control system is used. 6. Press-polishing and paper reeling: It adopts super press polishing machine and level paper reeling machine.
This wrapping/packaging paper machine is designed for both single and double layers. It comes in a variety of models, including the 1092 type, 1575 type, 1760 type, 1880 type, 2100 type, 2400 type, 2880 type, 3200 type,3600 type,4200 type and 4800 type. The number represents the machine deckle. It can also be equipped with a relevant device, according to paper grammage, machine speed, output, and other parameters. The main equipment: 1. Pulp-flowing box: It adopts open-type pulp-flowing box, consisting of pyramid tube, staircase diffuser, distributing roller and box body. Staircase diffusion orifice plate pulp distributor is three-stage diffusion, which made of organic glass and upper and lower lip plates made of stainless steel. The upper lip plates can do full and local adjustment is three-stage diffusion. 2. Fourdrinier part: Wire table is 18000mm. Except draw-out seat made of alumina alloy, table rack is all welded by section steel with 1.5mm stainless steel cladding. Wire part is mainly composed of chest roller, forming board, wire-driving plate, water scrapping board, moisture absorbing box, and vacuum water-absorbing box, vacuum roller, wire-driving roller, electrical wire-tighter, pneumatic corrector, constant-tension wire-tighter, incision needle and margin raising device. 3. Press part: It adopts vacuum absorption injection paper, one streak of vacuum pressing and three streaks of pressing. 4. Drying part: It is set 28 pieces of f1500mm drying cylinders, including one f3000mm big cylinder of array type, 6+6+8+1+glueing machine+8 driven by enclosed gear box and lubricated by sparse oil. 5. Driving and control part: It adopts AC frequency conversion speed, drive step by step. Hard tooth surface gear box connected by universal coupling is used, and entire digital closed circle control system is used. 6. Press-polishing and paper reeling: It adopts super press polishing machine and level paper reeling machine.
Dekelon paper machine for printing and writing paper production. It can be used to make A4 paper, newsprint paper, writing paper and more, in 50-300g/m² from wood pulp, waste paper, wood and other pulp. The design speed of this newsprint paper machine is 300m/min, and the breadth is 1092-4100mm. Structural Features of the Paper Machine 1. Headbox This paper making machine is designed with an open headbox, which is composed of the taper pipe, stepped diffuser, rectifier roll and box. The pulp distributor with a pore plate made of organic glass comes with three step diffusion. The top and lower lips of the slice are made with stainless steel. The top lip has full and local control. 2. Forming Section (Wet End) The fourdrinier table has a length of 18,000mm. With the exception of the bearing block, which is made of aluminum alloy, the rack is completely constructed from structural steels by welding, and covered by a layer of stainless steel at a 1.5mm width. The forming section of the paper machine consists of the breast roller, forming board, foils, suction boxes, vacuum couch roller, electric wire tightener, pneumatic corrector, and edgy warping device. 3. Press Section In the press section, the fourdrinier machine uses a vacuum suction pickup roller and three suction rolls. 4. Dryer Section This paper machine is equipped with 28 sets of f1500mm steam-heated cylinders and one f3000mm cylinder in the dryer section. Paper dryers are typically arranged in groups. The arrangement pattern is, in sequence: 6 dry cylinders, 6 dry cylinders, 8 dry cylinders, 1 dry cylinder, glue applicator and 8 dry cylinders. They are driven by a sealed gearbox and lubricated with a thin oil. 5. Drive and Control Section This paper machinery uses a sectional drive system composed of an AC variable frequency motor, reduction gearbox with a hard teeth surface, and universal spindle coupling. It comes with an all-digital closed loop control system. 6. Calender Press Polish and Rewinding Dekelon's printing and writing paper machine applies a super calender and horizontal paper winding machine.
Dekelon also provides paper machines for the production of specialty paper, included regenerated leather, asphalt paper, grey board, sealing gasket paper and filter paper. The specialty paper is made from the leftover material of various leather, scraps from the buffing machine, waste fibers and more, which are first processed into pulp and then formed into a paper sheet with a width of 0.6-5mm on the fourdrinier table. After this, the paper sheet undergoes dewatering, pressing, drying, polishing, flattening, cutting, winding and packaging in the specialty paper machine. >applications The specialty paper production line is widely used for different leather products, including leather bags, belts, clothes, sofas, shoes and more.
kraft paper and corrugated paper uses wood pulp board, waste paper, timber, bamboo, rice straw, bagasse, and other pulps to produce the paper at 50 to 300g/m². The machine is primarily used to make Kraft paper, corrugated paper, cardboard paper, and more. Trimmed width of the paper ranges form 1092mm to 3300mm. The design capacity of the packaging and wrapping paper machine is 10-150t/d. This packaging paper machine is designed for both single and double layers. It comes in a variety of models, including the 1092 type, 1575 type, 1760 type, 1880 type, 2100 type, 2400 type, 2880 type, 3200 type,3600 type,4200 type and 4800 type. The number represents the machine deckle. It can also be equipped with a relevant device, according to paper grammage, machine speed, output, and other parameters. 1. 3600mm type Paper Machine Technical Parameters Paper variety: Kraft paper, corrugated paper, cardboard paper Grammage: 50~300g/m Working speed: 350m/min Design speed: 500m/min Capacity: 75~100T/ Rail distance: 4700 mm Driving method: AC Variable frequency speed control, sectional drive Machine type: Heavy square box type, with left and right machine available Standard: International export standard
Paper cutting machine is the equipment that cut into flat paper in paper industry. It is divided into two kinds: knife cutting machine and paper cutter. The blade cutter consists of a slitting mechanism consisting of upper knife, lower knife, rotary long knife and fixed base knife. Can be divided into 6-10 paper rolls at the same time. The flat knife cutting machine is the platform of the adjustable knife, the size of the flat sheet. Paper cutting machine is made up of paper cutting machine and industrial paper cutting machine. Daily paper cutter with toilet paper cutter, napkins, paper cutter, paper cutter, square paper cutter, the production of paper cutter, clean toilet paper cutter, such as tissue paper cutter of paper cutting machine. According to different paper products, the corresponding paper cutting machine is different. Paper cutting machine The paper cutter is more a band saw, which is a bandsaw cutter used to cut toilet paper roll paper. The strip saw cutter is equipped with automatic knife and movable platform, which can be cut into the finished product according to the required length and width.
Our tissue rewinding machine can be divided into fully automatic and semi-automatic types. The fully automatic tissue rewinder comes with a computer control system. Fully Automatic Tissue Rewinder Using computer programming technology, the fully automatic tissue rewinding machine achieves an automatic change of the paper tube or coreless roll paper, and auto gluing, sealing, and trimming. This reduces labor intensity and increases the product quality. Semi-Automatic Tissue Rewinder The semi-automatic tissue rewinding machine relies more on manual operation. With only a slight difference in the operation conversation, there is very little difference between this and the automatic rewinder. Main Features 1. The fully automatic tissue rewinder is available with a double face embossing unit that makes the tissue softer, while keeping a uniform embossing effect on each face and firm lamination. This paper converting machinery is ideal for processing rolls for kitchen use. In addition, the end product comes with 15% or more weight reduction than those with the same size, but a single face embossing. 2. Therewinding equipment can be equipped with special units for a complete and quick switchover between coreless, solid, and hollow tissue rolls. This change over is optional according to customer requirements. 3. Our tissue rewinding machine can synchronously complete automatic trimming, gluing, sealing, and roller drawing out, enabling the paper to smoothly enter the slitter and packaging unit without sheet loss. Because of this, it can improve the production efficiency and product grade. 4. This tissue rewinder uses a pneumatic belt paper feeder. It is designed with tension control devices for unwinding rollers and each paper roll.
This cutter is applicable to all kinds of printing paper, kraft paper, glassine paper, books, leaflets, cards as well as all kinds of plastic, leather and metal foil, etc. Structural features: 1.Add-type air cushion platform, light control, dual digital display, lcd screen, the data resolution of 0.05mm, positioning accuracy of ¡à 0.15, 2. Concentration of fuel injection systems, optical line of the knife, mechanical rotation, quick tool change; ball screw and dual guide to push the paper runs a smooth light, low noise, accurate positioning, significantly improve the cutting accuracy and speed, and extend the life of the machine; built-in safety protection devices bed knife, cutting through the protection and automatic back-bit cd and other security devices; 3.Optional chrome and with air-cushion table, enhance operational efficiency; 4.Optional optical bench argon-plated, long-term use to prevent operator eye fatigue; 5.Centralized lubrication systems, security systems designed according to iec standards; 6.Model based a high-end computer program controlled, mid-range dual digital display, digital display and many were single (economic type) system, style diversification. Export wooden case
