S&S SEJ168S-5376 electronic jacquard machine has high compatibility with power loom and high speed rapier loom. It is compatible with all types of design formats and platforms. The high performing solenoid of this digital jacquard machine valves with automated switching technology to eliminate excess heating and reduced power consumption. The pulling knives made of aluminium alloy with special heat treatment to be used for lifetime. This electronic jacquard loom is suitable for all kinds of weaving looms, such as rapier loom, air jet loom, water jet loom, shuttle loom, projectile loom. It could be used to weave label, tie, upholstery fabric, curtain fabric, shading fabric, sofa cloth, bedding cloth, towel, carpet, velvet, garment fabric, sari fabric, silk fabric, lining fabric etc. Hooks 5376/ Shed Opening 55-120mm/Max Speed 700 rpm/ Advantageous Features 1. The low power axial-flow fans ensure stable working condition to electronic system. Sealed fuselage, optimized filtration and ventilation system can effectively prevent flying flowers into the system. 2 Hollow type of core parts with light inertia, high speed and low torque are more suitable for making large and heavy design fabrics. 3 All main driving components of digital jacquard machine are standard parts. The transmission efficiency of chain is as high as 96%. The bearing capacity and service life of enforced self-lubricating chain of jacquard weaving loom is 5 times than that of ordinary chain. The casting wallboard has a good mechanical properly. It helps to decrease the vibration and reduce the noise. 4 The core hook components of the jacquard loom machine use sealed and low-power consumption electromagnet. It saves energy and has high efficiency. All digital jacquard looms adopt high quality harness which have extreme wear-resistance and corrosion resistance. There are two types of pulley you could choose to use in the hook component. One is pulley with bearing, another is pulley without bearing. The bearing capacity of pulley with bearing is better and it is more suitable for high-speed weaving. 5 The maintenance of the electronic jacquard weaving loom is very easy because it has the most concise shedding mechanism and the fewest parts. The maintenance cost is also much lowered.
GA731 rapier loom can weave all kinds of nature fiber, rayon and synthetic filament. It is the most suitable to weave all kinds of fabrics involved the fields of furnishings, upholster, tour, civil engineering, industry, such as wool fabric, linen, silk, cotton, chemical fiber, sunscreen fabric, jute, glass fiber, flat yarn, jacquard, leno weaving, etc. Main Technical Parameters >>Reed width: 150, 190, 210, 230, 260, 280, 320, 360, 380, 460(cm) >>Speed: 150cm: 320~430 RPM 190cm: 312~430 RPM 280cm: 232~320 RPM 320cm: 224~300 RPM 380cm: 195~280 RPM >>Insertion rate: 1000m/minute ~ 1200m/minute >>Weft density: Mechanical take up: 3~68 picks/cm >>Electronic take up: 3~120 picks/cm >>Shedding device: Mechanical Dobby/ Electronic Dobby (20 shafts Max) >>Electronic Jacquard >>Let-off: Mechanical /Electronic >>Take-up: Mechanical /Electronic >>Beating: Conjugated cams with double drive on both sides >>Weft insertion: Slay driven by conjugated cam >>Weft beam: Single / Double >>Flange diameter: 800mm /1000mm (selectable >>Cloth roller: Diameter 550mm >>Power: Total consume< 4.6kw >>Control: CPU controlling system >>Weft selection: Electronic weft selector >>Function: Pick auto-finding, mark prevention. Reed Width: 190cm 210cm 4sets per 40GP with pallet Reed Width: 230cm 3sets per 40¡¯GP with pallet Reed Width: mare than 230cm 2sets per 40¡¯GP with pallet.
Rapier looms Total 47 looms picanol gtn 4 r Width 190 cms, with staubli dobby 2232 Each loom with 2 weftfeeder, 1.5 warp beams, 10 healdframes, 1, 5 fabric roller, 5000 heddles and droppers In container
Rapier loom Main specification: Reed width: 180cm, 200cm, 230cm, etc.According to the customers need. Rotation speed(r.P.M):220-240 Weft selection:4colors Number of heddle frame: 16pages Electrical control:p.L.C Power(kw):1.5-1.8 Dobby open-end device: adopting gt221 high speed dobby(engine drive) Dobby feathers: Adopts advanted maching methods and technology, guarantee the balance of the frame movement. Adopts rigid driving.Suitable for the production of weighter fabrics. High precision, low voice. Dobby parameters Composition:dobby and dobby heald reversing motion Type of shedding: double lift full open Method of mounting:in high position, left and right side Lifting units: 20(include colorselecting) Pitch:12mm Signal reading method:cycle card Lubricate:semi-auto lubricating Suitable speen for looms:280r/min Suitable reed width for looms:140cm-380cm Signal features Advanced instructure, suitable for higher loom speed. Stable driving, safety and reliable movement. Suitable for weaving more complicated patterns. Easy and rapid for changing the variety of the fabric patterns.
We are supplying best quality material
Sulzer projectil looms 2 ulzer looms 85" tw11 4 colr with kr dobby and 2 153" sulzer tw11 looms 4 color with kr dobby for sale immidiatly.
Sulzer loom parts Fit for sulzer looms : Projectile feeder plate/link, rh-opener, bush, Rh-lever/bar, special screw/revet, stop revet, Weft end gripper, spring rod/cap, rivet pin, screw, Guide piece, weft end gripper body/foot, Sales3athonfeblades com, to contact us Ctn
Sulzer projectile loom
We manufacture and export various kinds of grippers and spare wearing parts for different kinds of textile machinery. Our grippers contents somet, vamatex, donier, picanol, gamma, muller, sulzer
