Electronica Mechatronic Systems

Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.

AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.

Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.

Ethanol Alcohol Making Machine Equipment/plant,ethanol alcohol equipment ,ethanol alcohol plant, pharmaceutical medical ethanol alcohol plant/process line /equipment /machine /turnkey project /customized ,competitive price good quality ,welcome cooperate! From design -manufacture -installation -traning ,capacity 2000L-600000L/day. Material : starch product ,sugar product ,grain ,and so on . Exported Brazil, Argentina,Korea,Thailand ,Vietnam, Myanmar and so on .

Ethanol/Alcohol process machine ethanol/alcohol process line /production line ,turkey project for ethanol/alcohol production line ,ethanol /alcohol equipment,ethanol /alcohol distillation machine ,dehydration ethanol/alcohol process machine . 1. It is a turn key whole set equipment, simple equipment, less worker, less area, less cost. 2. Can produce 1000L-1000000L 96%-99.9% alcohol(ethanol) per day. 3. Can use Corn, wheat, cassava, molasses, rice, potato, date, beetroot, sugar cane ect which contains starch or sugar material. 4. We can do the turn key system or section part. 5. Can improve and rebuild old alcohol(ethanol) production line. You can choose single distill tower to save money, also can choose 5 distill column to get good quality alcohol(ethanol). DDGS; Distillers Dried Grains with Solubles. We make many kinds alcohol equipments. Medical ethanol ,fuel ethanol and DDGS high protein feed Complete equipment ,medical ethanol in China, being regarded as national high-tech enterprise, star enterprise, standing commissioner of the National Alcohol Association, national demonstration unit of both quality and credibility assurance, national enterprise in designing and manufacturing class-I, class-II, class-III pressure vessel. We are capable to design, manufacture, install and adjust 1500t-500000t alcohol complete equipment on alcohol producing equipment and DDGS complete equipment, winning the National Science & Technology Progress Award many times. We are the first choice of clients at home and abroad. Material of alcohol equipment is corn, tapioca, potato, and other amyloid plants; Sirup, sugarcane, sugary jowar. We can also design for you according to your requirements. We have a lot of commercial partners in Europe, America and Southeast Asia because of our advanced technology and reliability and reasonable cost Alcohol equipment, ethanol equipment, fuel ethanol equipment, dehydration alcohol ethanol equipment Distillation columns

Spry drying machine for customized ! welcome order !

We are exporter of Ferro Vanadium. Ferro vanadium consist of vanadium and iron, mainly used as alloys in steel-making additives, high ferro vanadium alloy is also used as a additive. Commonly used vanadium iron containing vanadium 40%, 60% and 80% of three.