Supplier: Dental instruments, tweezer, probes, mouth mirror, extracting forceps, pliers, impression trays, scallers, elevator
One Step Troponin Test (Whole blood/Serum/Plasma FOR IN VITRO DIAGNOSTIC USE ONLY SPECIMEN COLLECTION 1. Testing should be performed immediately after the specimens have been collected. Do not leave the specimens at room temperature for prolonged periods. Specimens may be stored at 2-8C for up to 3 days. For long-term storage, specimens should be kept below -20C. 2. Bring specimens to room temperature prior to testing. Frozen specimens must be completely thawed and mixed well prior to testing. Specimens should not be frozen and thawed repeatedly. MATERIALS PROVIDED 1. Test cards individually foil pouched with a desiccant 2. Plastic dropper 3. Package insert MATERIALS REQUIRED BUT NOT PROVIDED 1. Timer/clock 2. Pipette 3. Controls ASSAY PROCEDURE 1. Read package insert carefully before testing. Allow the test devices, whole blood, serum or plasma to equilibrate to room temperature (15-30C) prior to testing. Do not open pouches until ready to perform the assay. 2. Remove the test device from the foil pouch and use it as soon as possible. 3. Place the test device on a clean and level surface. Hold the dropper provided vertically and transfer 3 drops of specimen (100�µl) to the specimen well (S) in the test device. 4. Wait for the red line(s) to appear. The result should be read between 10 to 15 minutes. INTERPRETATION OF RESULTS 1. Positive Two colored lines should be observed in the viewing window. The line in the test region (T) is the probe line; the line in the control region (C) is the control line, which is used to indicate proper performance of the device. The color intensity of the test line may be weaker or stronger than that of the control line. 2. Negative The control line appears in the test window, but the test line is not visible. 3. Invalid No line appears in the control region. Under no circumstances should a positive sample be identified until the control line forms in the viewing area. If the control line does not form, the test result is inconclusive and the assay should be repeated.
Supplier: Dental instruments,, root elevator, impression trays, needle holder, dental tools, crown removers, dental hollowware, dental forceps, explorers, handle for mouth mirrors, dental tweezers, dental scissors, burnishers, hollen back, filling, composite, dental scalers, dental rubber dam
Buyer: Dental instruments, dental forceps
Item No.: 001-001 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: Uncoated Feature: serrated tips Usage: extracting upper jaw incisors Item No.: 001-046 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting lower jaw incisors Item No.: 001-044 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting lower jaw incisors and roots Item No.: 001-008 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage:extracting upper premolars (bicuspids) Item No.: 001-032 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting upper premolars and roots Item No.: 001-150 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting upper premolars and incisors Item No.: 001-151 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting lower premolars and incisors Item No.: 001-048 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting lower jaw roots Item No.: 001-065 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting lower jaw roots Item No.: 001-015, 001-016, 001-017, 001-023 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting lower molars. Item No.: 001-222 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Feature: serrated tips Usage: extracting lower jaw third molars. Item No.: 001-210, 001-010 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting upper jaw third molars. Item No.: 001-088L Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting upper left 1st & 2nd molars. Item No.: 001-088R Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting upper right 1st & 2nd molars. Item No.: 001-018L Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting upper left molars. Item No.: 001-018R Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting upper right molars.
1# tooth extracting forceps for children Item No.: 002-101 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage:extracting upper incisors for children 2# tooth extracting forceps for children Item No.: 002-102 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage:extracting upper roots for children 3# tooth extracting forceps for children Item No.: 002-103 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage:extracting upper jaw incisors & roots for children 4# tooth extracting forceps for children Item No.: 002-104 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage:extracting lower incisors & roots for children 5# tooth extracting forceps for children Item No.: 002-105 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage:extracting lower jaw deciduous molars for children 6# tooth forceps for children Item No.: 002-106 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: cutting deciduous tooth for children 7# tooth extracting forceps for children Item No.: 002-107 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting lower incisors for children 8# tooth extracting forceps for children Item No.: 002-108 Materials: Martensite Precipitation-Hardening Stainless Steel Finish: uncoated Usage: extracting upper deciduous molars for children
Supplier: Dental instruments, surgical instruments, such as: tooth extracting forceps, orthodontics instruments, bracket position gauge, crown remove pliers, module separator, amalgam carvers, gum knife, cement spatulars, crown scissors, gum scissors, wax carvers, explorers, periodontal files/probe, root elevators, bone files, dental tweezers, periodontal files, dental chisels, burnisher, bone curettes, sharp spoon, scalers, excavators, mouth gauge, mouth mirrors, surgical scissors, ophthalmic scissors, needle holders, tissue scissors, plugger, gingival separator, stomatolog syringe, palatal bar, haemostatic forceps, dressing pliers, sponge holding forceps, tissue clamps, reflectors, mallets
Services: Manufacturers
Supplier: Dental and oral instruments, tooth extracting forceps, root elevator, bone rongeurs, bone files, bone curettes, rubber dam clamps & punch, orthodontic pliers, needle holders, gum scissors, amalgam instruments, mouth gags & retractors, periodontal instruments, filling instruments, cement spatula, dental explorers, mouth mirror handles, endodontic instruments, dental excavators, dental scalers, wax & modeling carvers, impression trays, dental syringes and dental
Services: Dhl, fedex and ups, manufacturing
Buyer: Stainless steel
Dental Impression Trays Features: Manufactured from AISI 420 German stainless steel. Product Conforms to ISO 9001, CE-Quality Mark, ISO 13485 and other Quality Standards Highly polished finish for aesthetic and corrosion resistance High Degree of Precision and Flexibility while conducting the Clinical Procedure. Premium Quality Stainless Steel with Superior Craftsmanship. Description: It is a device used to carry, confine and control the impression material from the patients mouth. During impression making the tray facilitate insertion and removal of impression material from the patients mouth. Rigid Tray for enhanced accuracy. Long Lasting and resistant to sterilization so last s a long time. Strong integral handle for secure tray control and removal. For more Details about this product and more dental instruments Kindly whatsapp 0092 303 478 2631 us or visit our website www.thrushintl.com We are happy to help you.
Zamaha dental supplies offer regular production items : Gracey curette, scaler, explorer, probe, filling instruments, mirror handle etc. Tooth extracting forceps, needle holder, bone rongeur, orthodontic pliers, wire cutter etc. Root elevators, rubber dam punch, plier, rubber dam clamp etc. Crown instruments, crown scissors, crown opener, crown spreader, crown remover etc. Dental tweezers, meriam tweezers, tissue forceps, adson tweezers, adson forceps etc. Sterlizing forceps, mosquito forceps, kelly forceps, kelly-renkin forceps etc. As per customer demand.
