We are global suppliers of quality Teakwood Logs, squares and lumbers. Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood. Our teak wood, especially, comes from legal origin and high quality forest management. Logs They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world. Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding. Lumber Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general. Squares The squares are produced in the sawmills with an internationally recognized liability standard. It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer. We equally have the following species of wood available... IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO , ,
Quality Timber BEECH ROUND LOGS / Oak Wood Logs / Eucalyptus Logs Teak Wood - Round Logs, Sawn Timber Logs 1) OUR LOGS ARE FRESH CUT STRAIGHT LOGS 2) THE LOGS ARE FUMIGATED BEFORE SHIPMENT 3) LOGS CAN BE SHIPPED WITH BACK AND CAN ALSO BE DEBACKED DEPENDING ON THE CUSTOMER 4) MOISTURE CONTENT IS 30-45% BUT CAN BE DRIED ACCORDING TO CUSTOMERS REQUIREMENTS 5) DIAMETER OF LOGS FROM 20CM ANDABOVE 6) LENGTH OF THE LOGS FROM 1M AND ABOVE ACCORDING TO THE BUYERS REQUIREMENTS 7) THE LOGS ARE SHIPPED WOTHOUT CRACK AT THE ENDS. THEY ARE ALSO PROTECTED WITH GANG NAILS TO PREVENT SPLITING. 8) WE CAN SUPPLY ACORDING TO BUYERS REQUIREMENTS
Spruce timber - commonly also known under its latin name "Picea Abies" is widely distributed throughout continental Europe and is a timber tree of major economic importance. The large tree usually has a straight, cylindrical trunk and growns to a height of about 30 m (up to 55 m), with a large diameter of about 60 cm (up to 1,5m). Big sizes - beams: Thickness - from 100 up to 300 mm Width - from 100 up to 300 mm Length - 3000/4000/5000 mm Small size - beams: Thickness - from 40 up to 95 mm Width - from 60 up to 95 mm Length - 3000/4000/5000 mm Boards: Thickness - from 18 up to 50 mm Width - from 50 up to 250 mm Length - 3000/4000/5000 mm
Pine timber - also referred to redwood timber, commonly also known under its latin name "Pinus Sylvetris" is the most widely spread in the East European Countries. The tree is generally 30m high with a diameter of about 1m but larger trees may be found on favorable sites. Big sizes - beams Thickness - from 100 mm up to 300 mm Width - from 100 mm up to 300 mm Length - from 3000 mm up to 5400 mm Small sizes - beams Thickness - from 40 mm up to 95 mm Width - from 60 mm up to 95 mm Length - from 3000 mm up to 5400 mm Boards Big sizes - beams Thickness - from 20 mm up to 50 mm Width - from 50 mm up to 200 mm Length - from 3000 mm up to 5400 mm
Beech timber - commonly also known under its Latin name "Fagus sylvatica" is the one most widely spread in the Romanian Carpathian Mountains, belonging thus to the only unpolluted forest area in Europe. TASS - SUPER SHORT Thickness - 25/32/38/50 mm Width - from 80 mm and wider Length - from 300 mm till 900 mm TAS - SHORT Thickness - 25/32/38/50 mm Width - from 100 mm and wider Length - from 1000 mm till 2000 mm TAL - LONG Thickness - 25/32/38/50 mm Width - from 120 mm and wider Length - from 2100 mm and longer
We Can Supply MAHOGANY - PINEWOOD - RUBBERWOOD or MIX HARDWOOD and ALBASIA FALCATA ***** S4S Molding finished , Finger Jointed Sticks , S4S Pallets ^^^ Kild Dried - Fumigation insect killer proceed *** * Usage : Furniture / Housing Components - Pallets * Vary sizes available by demand * 20mm x 100mm x 1200mm ### KD MC under 13% * MOQ 24 cbm in 20ft * Payment term will discuss by bank transfer - No L/C accepted
LVL Laminated Veneer Lumber for construction, packaging, furniture and other industry with high quality made from Leloi Global factory. We produce and supply many kind of LVL as: LVL Structural Timber LVL for furniture parts. LVL for packing. Above products are different to each other, from the quality to the price as well. We specially use all A grade local wood veneer for this product. Vietnam local wood species which made LVL look bright white and eye catching.
Export of wood SARL We are looking for serious buyers only. Hard and soft wood. These are samples. Contact for more Eucalyptus 20000m3 Pine 10000m3 Beech 5000m3 Spruce 5000m3 Teak 10000m3 Ayous 7000m3 Ash 10000m3 Poplar 10000m3 oak 3000m3 We supply round and sawn logs, sawn timber
Indonesian commercial plywood Falcata core (Albasia ) MLH Falcata core All sizes
We are suppliers of raw and sawn timber from Cameroon as IROKO, Sapelli, PADOUK, Bubinga, Sipo, Maobi, Okan, Tali, Tola, Zebra, Teak, Mahogany, Tioma, Azobe, Bosse, Foga, Bibolo, FRAKE We offer a wide selection of pine, oak, poplar, etc. wood for the production of pallets: freshly sawn; dried; thermal treatment; with anti-mould treatment; boards with Pads: 90mm x 90mm x 90mm Desk: 1200mm x 90mm x 18mm Desk: 1200mm x 80mm x 18mm Desk: 1000mm x 90mm x 20mm Classification system: European - French CTBA classification rules 3A quality The description of Pallet boards elements Other dimensions available on request. Length: 1000mm, 1500mm, 2000mm, 3000mm, 4000mm, 6000mm Thickness: 16mm, 19mm, 22mm, 32mm, 47mm, 50mm, 63mm, 75mm, 100mm Width: 75mm, 100mm, 115mm, 125mm, 150mm, 175mm, 200mm, 215mm, 225mm, 250mm Materials: Radiata Pine (New Zealand, Argentina, Chile etc). Mongolian Scotch Pine (Pinus sylvestris), White Pine (Chinese Northeast) Grade: AA: No knots, blue spot or black line on both face and back), AB: One side has no knots and some knots on the other side, CC: Both sides have knots Colour: Natural wood color or carbonization Certificate: FSC, ISO, Phytosanitary Certificate, Fumigation Certificate etc. Thickness: customer's requirements Moisture Content: Customer Request
