*More than 10 years manufacturer and supplier experience
*Quick delivery of 15 days.
*Australian Standard: AS/NZS 2208:1996safety glazing matererials
*Safety strong packing and loading
*Option processing clear ,frosted ,heat soaked,heat strengthened
*Edging:Flat edge,grind edge,polished edge,beveled edge and others.
Tempered Glass/Toughened Glass
Tempered glass is made by heating float glass to its softening point ( 650700�°C )and then suddenly cooling down to form compression in the surface layer of the glass, thus the mechanical strength is increased by 5 times.
Features:
1.5 times harder than ordinary float glass.
2. Tensile strength for float glass 40 MPa (N/mm2) ,tempered glass , 120200 MPa (N/mm2)
3.Quality standard AS/NZS 2208:1996
4.It withstands abrupt temperature change of 220 Centigrade.
5.Once breakage occurs, the glass disintegrates into small cubical fragments, which are relatively harmless to human body.
Specification:
Flat Tempered Glass
MIN 90x90mm,Max 3660x2140mm
Thickenss 4mm,5mm,6mm,8mm,10mm,12mm,15mm,19mm
Bent/Curved Tempered Glass
Max.Size 2200x750(mm)
Min Size 400*300(mm)
Thickness 519(mm)
Min.benting Radius 370mm
Applications:
1. External use of windows, doors, curtain wall, shopfronts, offices, houses, shops etc.
2. Interior glass screens, partitions, balustrades etc.
3. Shop display windows, showcases, display shelves etc.
4. Furniture, tabletops, picture frames etc.
1. Interlay paper between two sheets
2. Timber end caps
3. Iron/plastic belt for consolidation
4. Safety corner
Density2.5g/cm
Tensile Strength120200 MPa (N/mm2)
Compressive Strength 1000 N/mm 2
Yong's Module73 Gpa
Coefficient of linear expansion 9 x 10 6 m/Mk
softening point 650700�°C
Thickness4mm,5mm,6mm,8mm,10mm,12mm,15mm,19mm
Payment term (1) 30% deposit ,balance paid against the copy of B/L
payment term (2) 30% deposit ,balance will be L/C at sight
Delivery time 15 days after received the deposit
Packing End caps pakcing within stripe and paper
MOQ 1000 Square meter
Loading portQingdao port
Australian Standard: AS/NZS 2208:1996safety glazing matererials
Product Introduction
Add an extra touch of wow in your dining area/room with this astoishingly simple yet elegant contemporary dining table with rectangular clear glass top and yellow powder coated steel Legse. This contemporary glass dining table features a rectangular glass top that sits atop a base made of iron frame. Floors are protected with floor glides in case of accidental movement or rearrangement. Compliments all types of room settings and dining chairs, a must have for dwellings with modern/contemporary home decor. Leave a long lasting impression on your guests or gather family and friends around this chic, rectangular dining table and enjoy great meals.
Features
The top of the dining table is a piece of 8mm high-quality tempered glass, which is painted with black pigment and presents many small prisms, it looks very pretty. The four corners of the glass are treated safely to prevent personal injury. The legs of the table are plastic, light and durable, with black paint on the outside.
Advantage
- Adopt tempered safety glass.
- Concise design and fine workmanship.
- Elegant and durable, stunning dining table.
- Fit any style dining room and any decoration.
- Adopt rust-resistant plastic frame which is fixed by long bolts
, stable and durable.
Product parameters:
Size 160*80*75CM
Top Material Tempered glass
Leg Material Yellow Powder coated Steel legs
Top thickness 8mm
Leg Size 60*30mm
Beam Size 40*20mm
Diagonal Bracing Size 12mm
Colour Clear
Style Simplicity
Specific Use: DINING TABLE
General Use: Home Furniture
Feature: Eco-friendly
MOQ: 50pcs
About 10mm Ultra Clear Tempered Glass door from KXG building glass factory
Ultra Clear Tempered glass, also called Low Iron Toughened Glass and extra clear toughened glass. It is made of heating ultra clear low iron glass to 650�°C and cooling it rapidly. After this processing, the 10mm extra clear glass is stronger 4 to 5 times than before. It is a safety glass which is used when strength, thermal resistance and safety are important considerations.
10mm Extra Clear Tempered Glass Door Characteristic
1. High Strength
Kunxingâ??glassâ??produceâ??aâ??lotâ??extra clear tempered glass performs well in resisting bending and hitting owing to its high strength which is about five times that of normal float glass. It is able to withstand a surface pressure of 95Mpa.
2. High Safety
When the tempered glass is broken, the glass shard is small, which guarantee safety to make sure human harmless, and the toughening process greatly reduces the risk of thermal breakage to ensure less loss.
3. High Transparency
Super high transparency and a neutral color making it the ideal glass where high visibility and clarity are required.
10mm low iron Tempered Glass Specification
10mm low iron ultra clear toughened glass available size: Maximum 3000*8000mm, Minimum 150*300mm
All the processing done on the 10mm super clear toughened glass like polish edges, cut to size, drill holes, cut notches, cutouts, screen printing, acid etched, etc. must be done before tempering.
Shapes
Except flat 10mm ultra clear toughened glass,â??Kunxing Glass also could do shape 12mm ultra clear toughened glass, like round low iron tempered glass, Trapezoid super white reinforced glass, parallel ultra clear safety glass, etc.
10mm Ultra Clear Tempered Glass Application
Most often use as safety railing glass, high transparency aquarium glass, store front wall glass,â??Kitchenâ??Splashbackâ??Glass etc., and use to makeâ??21.52mm low iron laminated glass to use as security stair railing glass, jumbo size balcony glass, elevator glass, etc., and make 10+10+10mm anti-slip laminated glass for floor, etc.
Toughened glass is fabricated by heating annealed glass to over 600C and cooling it rapidly,
which locks the outer surfaces of the glass in a state of high compression, and the core or center of the glass in compensating tension. Round clear toughened glass is widely used for table top or center table etc.
Advantages of our tempered table top glass
High quality: we use high quality tempered with fine edges polished crafts for the table top uses long time uses.
Beautiful: our tempered glass for table top, with no bubbles, no scratches, beautiful appearance, for different type of table top uses.
Different choice: you can customized different type of glass for your requirement, like clear tempered table top glass, ultra clear tempered table top glass, color tempered table top glass, patterned tempered table top glass, frosted tempered table top glass, etc..
Tempered and Soaked Glass
Security: It will not hurt people after breaking to pieces,the self-beak rate is lower than 0.1%.
High intensity: It has 4 to 5 times strength than float glass
Hot Stability: It has good hot stability, which can endure 3 times temperature than float
glass, also can endure changing of above 200C.
Thickness: 3-19mm
Max specification:
Flat tempered glass 3000*8000mm;
Bent tempered glass 3000*5000mm R=1500mm.
Packing: Sea worthy wooden cases with interlayer paper.
*More than 10 years manufacturer and supplier experience
*Quick delivery of 15 days.
*Australian Standard: AS/NZS 2208: 1996-safety glazing matererials
*Safety strong packing and loading
*Option processing clear, frosted, heat soaked, heat strengthened
*Edging: Flat edge, grind edge, polished edge, beveled edge and others.
Tempered Glass/Toughened Glass
Tempered glass is made by heating float glass to its softening point ( 650-700 C )and then suddenly cooling down to form compression in the surface layer of the glass, thus the mechanical strength is increased by 5 times.
Features:
1.5 times harder than ordinary float glass.
2. Tensile strength for float glass 40 MPa (N/mm2), tempered glass, 120-200 MPa (N/mm2)
3. Quality standard AS/NZS 2208: 1996
4. It withstands abrupt temperature change of 220 Centigrade.
5. Once breakage occurs, the glass disintegrates into small cubical fragments, which are relatively harmless to human body.
Heat Strengthened Tempered Glass
1. Better flatness than tempered glass
2. Effectively resist the effect of thermal stress, avoid glass thermal explosion
3. Withstand a very wide range of rapid temperature changing with endurance of 200-300 C
4. Cooling rate lower and surface stress smaller than tempered glass
Use high quality raw clear glass, visible light transmittance(%) from 4mm-19mm
Specification:
Flat Tempered Glass
MIN 90x90mm, Max 3660x2140mm
Thickenss 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm
Bent/Curved Tempered Glass
Max. Size 2200x750(mm)
Min Size 400*300(mm)
Thickness 5-19(mm)
Min. Benting Radius 370mm
Applications:
1. External use of windows, doors, curtain wall, shopfronts, offices, houses, shops etc.
2. Interior glass screens, partitions, balustrades etc.
3. Shop display windows, showcases, display shelves etc.
4. Furniture, table-tops, picture frames etc.
Packing detail:
1. Interlay paper between two sheets
2. Timber end caps
3. Iron/plastic belt for consolidation
4. Safety corner
Density 2.5g/cm
Tensile Strength 120-200 MPa (N/mm2)
Compressive Strength 1000 N/mm 2
Yong's Module 73 Gpa
Coefficient of linear expansion 9 x 10 - 6 m/Mk
softening point 650-700C
Thickness4mm,5mm,6mm,8mm,10mm,12mm,15mm,19mm
Payment term (1) 30% deposit ,balance paid against the copy of B/L
payment term (2) 30% deposit ,balance will be L/C at sight
Delivery time 15 days after received the deposit
Packing End caps pakcing within stripe and paper
MOQ 1000 Square meter
Loading port Qingdao port
Australian Standard: AS/NZS 2208:1996-safety glazing matererials
*More than 10 years manufacturer and supplier experience
*Quick delivery of 15 days.
*Australian Standard: AS/NZS 2208:1996-safety glazing matererials
*Safety strong packing and loading
*Option processing clear ,frosted ,heat soaked,heat strengthened
*Edging:Flat edge,grind edge,polished edge,beveled edge and others.
Tempered Glass/Toughened Glass
Tempered glass is made by heating float glass to its softening point ( 650-700�°C )and then suddenly cooling down to form compression in the surface layer of the glass, thus the mechanical strength is increased by 5 times.
Features:
1.5 times harder than ordinary float glass.
2. Tensile strength for float glass 40 MPa (N/mm2) ,tempered glass , 120-200 MPa (N/mm2)
3.Quality standard AS/NZS 2208:1996
4.It withstands abrupt temperature change of 220 Centigrade.
5.Once breakage occurs, the glass disintegrates into small cubical fragments, which are relatively harmless to human body.
Specification:
Flat Tempered Glass
MIN 90x90mm,Max 3660x2140mm
Thickenss 4mm,5mm,6mm,8mm,10mm,12mm,15mm,19mm
Bent/Curved Tempered Glass
Max.Size 2200x750(mm)
Min Size 400*300(mm)
Thickness 5-19(mm)
Min.benting Radius 370mm
Applications:
1. External use of windows, doors, curtain wall, shopfronts, offices, houses, shops etc.
2. Interior glass screens, partitions, balustrades etc.
3. Shop display windows, showcases, display shelves etc.
4. Furniture, table-tops, picture frames etc.
1. Interlay paper between two sheets
2. Timber end caps
3. Iron/plastic belt for consolidation
4. Safety corner
Density2.5g/cm
Tensile Strength120-200 MPa (N/mm2)
Compressive Strength 1000 N/mm 2
Yong's Module73 Gpa
Coefficient of linear expansion 9 x 10 - 6 m/Mk
softening point 650-700 C
Thickness4mm,5mm,6mm,8mm,10mm,12mm,15mm,19mm
Payment term (1) 30% deposit ,balance paid against the copy of B/L
payment term (2) 30% deposit ,balance will be L/C at sight
Delivery time 15 days after received the deposit
Packing End caps pakcing within stripe and paper
MOQ 1000 Square meter
Loading portQingdao port
Australian Standard: AS/NZS 2208:1996-safety glazing matererials
About 10mm Ultra Clear Tempered Glass from KXG building glass factory
Ultra Clear Tempered glass, also called Low Iron Toughened Glass and extra clear toughened glass. It is made of heating ultra clear low iron glass to 650°C and cooling it rapidly. After this processing, the 10mm extra clear glass is stronger 4 to 5 times than before. It is a safety glass which is used when strength, thermal resistance and safety are important considerations.
10mm Extra Clear Tempered Glass Characteristic
1. High Strength
Kunxing??glass??produce??a??lot??extra clear tempered glass performs well in resisting bending and hitting owing to its high strength which is about five times that of normal float glass. It is able to withstand a surface pressure of 95Mpa.
2. High Safety
When the tempered glass is broken, the glass shard is small, which guarantee safety to make sure human harmless, and the toughening process greatly reduces the risk of thermal breakage to ensure less loss.
3. High Transparency
Super high transparency and a neutral color making it the ideal glass where high visibility and clarity are required.
10mm low iron Tempered Glass Specification
10mm low iron ultra clear toughened glass available size: Maximum 3000*8000mm, Minimum 150*300mm
All the processing done on the 10mm super clear toughened glass like polish edges, cut to size, drill holes, cut notches, cutouts, screen printing, acid etched, etc. must be done before tempering.
Shapes
Except flat 10mm ultra clear toughened glass,??Kunxing Glass also could do shape 12mm ultra clear toughened glass, like round low iron tempered glass, Trapezoid super white reinforced glass, parallel ultra clear safety glass, etc.
10mm Ultra Clear Tempered Glass Application
Most often use as safety railing glass, high transparency aquarium glass, store front wall glass,??Kitchen??Splashback??Glass etc., and use to make??21.52mm low iron laminated glass to use as security stair railing glass, jumbo size balcony glass, elevator glass, etc., and make 10+10+10mm anti-slip laminated glass for floor, etc.
Features:
1. The mechanical strength of tempered glass is as 3-5 times powerful as normal annealing glass, bending strength is as 2-5 times powerful as normal flat glass.
2. The optical performance of tempered glass is as well as the normal annealing glass, and they also have good mechanical strength and bounce impact strength.
3. Once breakage occurs, the glass disintegrates into small cubical fragments, which are relatively harmless to human body.
4. The excursion of temperature that tempered glass endures is 250-320 degree.
5. Sizes are produced as per customer request. Once tempered, it can not be cut down.
Application:
Glass door, curtain wall of building, indoor partition, elevator, showcase, door and window of building, furniture and household appliance etc.
Standards:
China GB15763.2-2005, CCC and 9963-1998; Europe EN 12150, AS/NZS 2208:1996
Specification:
Glass Types: Float Glass, Pattern Glass
Colors: Clear, Extra Clear, Bronze, Grey, Blue and Green etc
Thickness: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm
Size: max. 2400x5000mm, could be produced as per request.
Delivery Time:Within 20days after order confirmation.
Packing:
1. Interlay paper between two sheet.
2. Seaworthy wooden crates.
3. Iron belt for consolidation.
