Target L.L.C

The buyer would like to receive quotations for -

Product Name: Ductile Iron Pipe

Specifications:
DUCTILE PIPES 450mm/18” 16 BAR QTY 72 METERS
DUCTILE COLAR SOCKET 450MM/18” 16 BAR QTY 6 EACH
DUCTILE FLANGE ADAPTER 450mm/18” 16 BAR QTY 6 EACH

DI pipes shall be centrifugally cast(C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
DI PIPES ACCORDING TO EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type.

Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for ground condition I and II and III. The external surface of the pipe spigot end at a minimum length of 250 mm shall have non toxic epoxy paint applied to a minimum dry film thickness of 100 microns. The internalsurface of the socket end shall be painted with a layer of zinc rich epoxy paint 150g/m²(zinc content not less than 85%° plus a layer of non toxic epoxy paint to aminimum dry film thickness of 100 microns.
Inside protection lining:
Cement mortar according to ISO 4179 – 1985.
2.2 Length of Pipes
Standard length for pipes is 6 meters for transport in bundles or 5.5 -5.8 meters for transport in open top containers.
2.3 Testing
The manufacturer shall demonstrate the conformity of his products with the standards by submitting the below performance tests specified in the standards:
• Compressive strength of the cement mortar lining.
• Leak tightness of flexible joints to positive internal pressure.
• Leak tightness of flexible joints to negative internal pressure.
• Leak tightness of flexible push-in joints to positive external pressure.
• Leak tightness of flexible joints to dynamic internal pressure.
• Leak tightness and mechanical resistance of flanged joints.
• Leak tightness and mechanical resistance of screwed and welded flanges.
The test should include:
• Dimensions Examination.
• Wall Thickness.
• External Diameter.
• Internal Diameter.
• Length
• Straightness of the pipes
• Ovality Test of the Pipes.
• Cement Lining Thickness.
• Tensile Test.
• Elongation test
• Hydrostatic pressure test.
• Hardness Test.
• Microstructure Examination supported by pictures
• thickness of external paint coating
• works leak tightness test for pipes and fittings


pipes and coating materials shall be certified for potable water use and shall contain
no ingredients that may migrate into water in amounts that are considered to be toxic or
otherwise, dangerous for health

Quantity Required : 100 Piece/Pieces

Shipping Terms : CIF

Destination Port : Jordan

Payment Terms : full irrevocable confirmed l/c at sight

Looking for suppliers from : Worldwide

Contact : Ramzi Saba

Please quote for the following wholesale product requirement -

Product Name: Ductile Iron Pipes Fittings And Valves

Specifications:
Ductile Iron Pipes
1400mm Dia Ductile Iron Pipes- 48m
1000mm Dia Ductile Iron Pipes-36m
900mm Dia Ductile Iron Pipes-12m
800mm Dia Ductile Iron Pipes-12m
600mm Dia Ductile Iron Pipes-36m
400mm Dia Ductile Iron Pipes-36m
350mm Dia Ductile Iron Pipes-54m
300mm Dia Ductile Iron Pipes-36m
250mm Dia Ductile Iron Pipes-60m
200mm Dia Ductile Iron Pipes-48m
100mm Dia Ductile Iron Pipes-140m
80mm Dia Ductile Iron Pipes-70m
50mm DIa Ductile Iron Pipes-40m
40mm Dia Ductile Iron Pipes-52m
Ductile Iron Bends 90 Degree
1400mm Dia Ductile Iron 90 Deg Bends-3 Nos
1000mm Dia Ductile Iron 90 Deg Bends-8 Nos
900mm Dia Ductile Iron 90 Deg Bends- 4Nos
800mm Dia Ductile Iron 90 Deg Bends – 3Nos
600mm Dia Ductile Iron 90 Deg Bends- 6Nos
350mm Dia Ductile Iron 90 Deg Bends- 8Nos
300mm Dia Ductile Iron 90 Deg Bends- 18Nos
250mm Dia Ductile Iron 90 Deg Bends- 24Nos
200mm Dia Ductile Iron 90 Deg Bends- 18Nos
100mm Dia Ductile Iron 90 Deg Bends- 26Nos
80mm Dia Ductile Iron 90 Deg Bends- 16Nos
50mm DIa Ductile Iron 90 Deg Bends- 12Nos
40mm Dia Ductile Iron 90 Deg Bends- 14Nos
Ductile Iron Tee
1400mm x 1400mm x 1400mm – 1 nos
1400mm x 1400mm x 800mm- 3 nos
1000mm x 1000mm x 1000mm- 1 Nos
1000mm x 1000mm x 600mm – 3 nos
100mm x 100mm x 100mm- 3 nos
40mm x 40mm x 40mm- 3nos
Ductile Iron Reducers
800mm x 400mm- 3 nos
600mm x 350mm – 3 nos
250mm x 150mm- 2 nos
200mm x 150mm- 8Nos
150mm x 100mm- 14Nos
100mm x 80mm- 8Nos
100mm x 40mm- 6Nos
Ductile Iron Flanges
1400mm Dia Ductile Iron Flange- 12Nos
1000mm Dia Ductile Iron Flange-16Nos
900mm Dia Ductile Iron Flange-8Nos
800mm Dia Ductile Iron Flange-12nos
600mm Dia Ductile Iron Flange-24Nos
400mm Dia Ductile Iron Flange-18Nos
350mm Dia Ductile Iron Flange-36Nos
300mm Dia Ductile Iron Flange-28Nos
250mm Dia Ductile Iron Flange-22Nos
200mm Dia Ductile Iron Flange-17Nos
100mm Dia Ductile Iron Flange-30Nos
80mm Dia Ductile Iron Flange-12Nos

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Dubai, United Arab Emirates

Payment Terms : L/C

Looking for suppliers from : China, India, South Korea (Republi

Contact : Irfan Aslam

Please quote for the following wholesale product requirement -

Product Name: Ductile Iron Pipe
Color: Black, Natural Finished
Type: Ductile Iron Pipe, Cement Lining Opc Zinc Mass
Use: Industrial
Packaging Terms : Standard

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Singapore

Payment Terms : Bank To Bank

Looking for suppliers from : Worldwide

Contact : Will

The buyer would like to receive quotations for -

Product Name: Ductile Iron Pipes

Specifications:
1) DI Pipe - 1500 mtrSize- 6 Inch, Pressure - 40 Bar, K9 Socket2) 6" Washout Valve (PN-40)- 1 No3) 6" Butterfly Vale (PN 40) - 1No4) 6" Double Orifice Air release valve (40 Bar) - 1 No5) 6" DI Tee (40 Bar, Flange Type)- 3 Nos6) 90 Deg 6" DI Elbow (40 Bar, Flange Type)- 2 NosREGARDS
Certification:WARS,BSI,ISO
Joint Type:T type / K type / Flange type
Internal coating:Portland
External Coating:Zinc + Bitumen Painting
Coating: Metallic zinc coating + Bitumen complying with ISO8179
Joint structure: push-in, Push in with restrained groove, mechanical joint, flange type
Test:100% Water Pressure Test
Product name: Iso2531 C25 C30 C40 Ductile Iron Pipe
Application: Water supply pipes, drainage pipes,etc.
Transportation: Bulk vessel or container
Shape: Round
Material: Ductile Iron
Place of Origin: CN;SHX
Brand Name: Solid
Length:5.7m,6m
Standard: ISO2531/EN545/EN598
Application: pipeline
Hardness:= 230HB

Quantity Required : 1500 Meter/Meters(sample)

Shipping Terms : CIF

Destination Port : Oman

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Yis Hak Teklezghi

Please quote for the following wholesale product requirement -

Product Name: Ductile Iron Pipes

Specifications:
- Pipe Ductile Casting, Min. Tensile Strength 420 MPa
- With high tensile strength, resistance to loads, pressure and vacuum, High corrosion resistance,
- Does not require cathodic protection
Packaging Terms : Carton & Bags

Quantity Required : 1 Twenty-Foot Container(sample)

Shipping Terms : FOB

Destination Port : Turkey

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Mohannad

Buyer is interested to receive quotations for the following RFQ -

Product Name: Ductile Iron Pipe

Specifications :
Color: Black, Natural Finished
Type: Ductile Iron Pipe, Cement Lining Opc Zinc Mass
Use: Industrial

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Singapore

Payment Terms : To be discussed with suppliers

Looking for suppliers from : Worldwide

Contact : Will

The buyer would like to receive quotations for -

Product Name: Ductile Iron Pipes

Specifications:
Nominal Pipe Size, NPS (mm) 1200
Line Pipe Material Ductile Iron
Pipeline Outside Diameter, O.D. (mm) 1255
Pipeline Inside Diameter, I.D. (mm) 1212
Nominal Wall Thickness (mm) 15.3
Pipeline Length, approx. (km) each 86
Medium Freshwater
Principal Design Code ISO 2531
Design Factor, F 1.5
Design Pressure (Barg) 16
Operating Pressure (Barg) 13
Design Temperature °C (Material) 50
Class Rating (Fittings and Flanges) ISO PN 16, PN 10
Internal Pipe Coating Cement mortar lining with seal coat
External Pipe Coating metallic zinc coating before applying
coal tar or a bituminous compound,
pigmented with aluminum of thickness
not less than 100 microns
Insulation Double layer of polyethylene + if
necessary tape Wrapping depending on
soil resistivity + C.P. system if the soil
resistivity is low

Quantity Required : 50 Kilometer/Kilometers(sample)

Shipping Terms : FOB Or CNF

Destination Port : Kuwait

Payment Terms : L/C

Looking for suppliers from : China, South Korea, India

Contact : Farukh Nasim

Please quote for the following wholesale product requirement -

Product Name: Ductile Iron Pipes

Specifications :
Material Common
Share The Product Catalog

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : FOB

Destination Port : Singapore

Payment Terms : T/T

Looking for suppliers from : Worldwide

Contact : Purchasing Department

The buyer would like to receive quotations for -

Product Name: Ductile Iron Pipe

Specifications:
Materials:
Pipe Ductile casting, Min. Tensile strength 420 MPa
With high tensile strength, resistance to loads, pressure and vacuum,
High corrosion resistance,
Does not require cathodic protection

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : FOB

Destination Port : Turkey

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Mohannad

Please provide a quotation to the following requirement from importer -

Product Name: Ductile Iron Pipes

Specifications :
Ductile Iron Spun Pipes(E Sealed) Details As Inv(Gst Tax Inv No.ci2000000341 342 343 347 353Dt.14.04.19
Made Of Cast Iron

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Singapore

Payment Terms : DP

Looking for suppliers from : India, China

Contact : Dhazin