Product Details : The Transformer used in the power supply unit is manufactured as per the UL norms. The transformer will be potted/sealed in an enclosure using Epoxy (a mixture of Resin & Hardener) which ensures high reliability and efficiency. The enclosure is made up of Prime Stainless Steel material SS 304 grade (also carbon steel with powder coated enclosure can be provided on request ) Block Terminals will provide the easiest way for the customer to connect the secondary tappings. Photocell and timer connected as per the customer's needs a circuit breaker of 25A is provided for circuit protection. Technical Details : Wattage - 75w to 1200w Frequency - 50/60 Hz Pry. voltage - 120V /277V Sec... voltages as per customer requirements Insulation class F, H Max. regulation 10% Dielectric 2000v, primary to secondary for 1 second. Dielectric 2000v, all windings to lamination for 1 second.
General specifications: Optional case coating (secc/spcc/sgcc) Rated power: 200w Amd and intel p4 atx 12v1.3 version Auto-thermal cooling 8cm fan Male/female connector, i/o switch 20 + 4-pin, 2 sata, 2 hdd, 1fdd Cable length is 400mm 1.2m eu/us power cord Dimensions: 150 x 140 x 86mm Input specifications: Input voltage: 90 to 132, 180 to 264v ac (optional change-over switch) Input frequency range: 50/60hz Leakage current: 3.5ma at 230v/50hz Input current: 10a at 115v.6a at 230v Output specifications: Output power: 200w Maximum power: 300w High efficiency: 72% above Stability mtbf: 100khrs Features: Ocp, scp, ovp, opp, short-circuit protections Low-ripple and noise 100% ate testing 100% burn-in testing Output rise time: 0.1 to 20ms Pg signal rise time 10ms (maximum) Environmental specifications: Operating temperatures: 10 to 50¡ãc Storage temperatures: -40 to 70¡ãc Cable length is 400mm 1.2m eu/us power cord Dimensions: 150 x 140 x 86mm
Features: Compliant with 80 plus standard-efficiency 80%+ Dual switch forward converter design Supports intel core 2 i5 and i7 and amd phenom and athlon cpus Optional for case coating, 24-pin cable shield and pci-e connector Output power: 400w Power: 450w (maximum) Efficiency: 80% at 115/230v ac Ovp, ocp, otp, scp, short-circuit protections Low-ripple and noise 100% ate testing, 100% burn-in testing General specifications: Hold-up time 17ms at maximum load 115v ac/60hz or 230v/50hz Dimensions: 150 x 140 x 86mm Mtbf 100k hours Output rise time: 0.2 to 20 milliseconds Pg signal rise time: 1ms (maximum) Environment specifications: Operating temperatures: 0 to 50¡ãc Storage temperatures: -40 to 70¡ãc Dimensions: 150 x 140 x 86mm Mtbf 100k hours Output rise time: 0.2 to 20 milliseconds
Features: Compliance with 80 plus standard, efficiency 80%+ Support intel core i3, i5, i7, amd phenom and athlon Dual-switch forward converter design m load 115v ac/60hz or 230v/60hz Dimensions: 150 x 140 x 86mm Mtbf: 100k hours Output rise time: 0.2 to 20ms Pg signal rise time: less than 1ms Dimensions: 150 x 140 x 86mm Mtbf: 100k hours Output rise time: 0.2 to 20ms
Input Voltage Range : 11-15VDC Efficiency : 90% Min Rated Output Power: 100W Output Voltage: 100/110/220/230/240 VAC Output Frequency: 50/60Hz Protection : OCP OVP SCP OPP Colorbox & Carton
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 100KW Rated energy: 150KWH
We supply all the types of AC/DC Power Supply / Converter Units as per the desired applications and also maintain the international quality standards
ANEVT(F) series high-precision bidirectional DC power supply adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, seamless switching between forward and reverse, automatic bidirectional operation, energy feedback to the grid at full power; advanced digital control, ultra-high control accuracy, fast response, wide output voltage range; compared with conventional bidirectional power supply, it can achieve full range of high-precision output from 0V to full scale, up to 2000V, and the maximum power of a single machine can reach 1MW; abundant programming and testing functions, suitable for a variety of applications with different upper computer software. Applications: Testing of electric vehicle motors and controllers Testing of electric vehicle transmission system and powertrain system Testing of special electric vehicle motors, controllers, electric vehicle transmission systems, and powertrain systems Testing of fuel cell Testing of new energy motor system Testing of ship electric drive, electric drive system Testing of charger and charging pile Testing of battery pack charge/discharge Testing of capacitor and super capacitor charge/discharge Testing of energy storage system converter Testing of UPS and EPS system Testing of hybrid Simulated battery to replace real battery-powered test applications Power supply for high-power DC test
This ANFH series AC power supply adopts digital technology and IGBT intelligent output with pure output waveform. The power supply has the ability to withstand impact of 3 times the rated current, featuring strong load adaptability, suitable for various impact loads such as motors and air conditioners, with good dynamic characteristics. The power supply is designed suitable for 19 standard chassis, compact, and can be directly installed in a standard cabinet for various applications such as testing, system integration, production line, etc.; as well as 4.3 color LCD touch screen, convenient and intuitive, widely used in home appliance lines, labs, quality inspection institutes, certification centers etc. Features: 19â?? standard chassis, compact, can be installed in standard cabinet Withstand 3 times the rated current lasting for 2S, directly start impact load equivalent to 1/3 of the power Adjustment of voltage/frequency in output state Startup ramp-up and online ramp-up, and the ramp-up time can be set Measurements: voltage, current, frequency, active power Voltage level: 1.0~150.0V, 150.1~300.0V automatically adjustable or locked within 1.0~300.0V Line voltage drop compensation Multi shortcut groups, power-down memory and shortcut keys 4.3â?? color touch screen, convenient and intuitive Key lock and humanized design to avoid misoperation Operating data recorders: automatically record the power state when alarming and alarm code, etc Standard RS232 port, optional RS485/GPIB/Ethernet port or analog control Application: 1. Impact resistant: impact loads with 1/3 power can be directly started without soft start 2. Adjustment of voltage/frequency in output state 3. Start ramp up and online ramp up 4. 4.3 color touch screen, convenient and intuitive
