Low Carbon Ferro manganese constitutes approximately 80% of manganese and 1% of carbon with lower contents of sulphur, phosphorous and silicon. Low carbon Ferro Manganese is mostly used in the welding industry. It is an essential ingredient for making high-strength low-alloy steel and stainless steel. Form- Solid, Carbon- 0.50%, Phosphorus- 0.20%, Silicon- 0.6%, Sulphur-0.05%,
Ferro Manganese (FeMn) is product of the blast furnace containing besides iron, 70 to 85% of manganese. It is used as a de-oxidizer for manufacturing of non-magnetic stainless steel and for the introduction of manganese into steel. Manganese is very important element in steel as it improves the strength, toughness, hardness and workability. Manganese also helps in getting ingots free from blow holes. It lowers the critical temperature and promotes the formation of pearlite. Manganese dissolves in solid solution of ferrite, combines with carbon to form carbides. it improves weldability, wear resistance and strength without adversely affecting the ductility of steel.
High carbon ferro manganese Spec.: mn: 75% min si : 1.5% max c : 7.5% max s: 0.05% max p: 0.35max size: 10-50mm 90% min Size: 10-50mm 90% min Packing: in 1mt big bags
We supply the Quality Ferro Alloys Like Ferro Manganese HC / MC / LC Grade I II III Mn 65% min 70% Min 75% Min Si 2% Max 2% Max 1.50% Max C 8% Max 8% Max 8% Max S 0.05% Max 0.035% Max 0.03% Max P 0.40% Max 0.30% Max 0.25% Max MC FeMn Mn 70%Min /75% Min / 78% Min Si 1.50% Max C 1.50% MAX S 0.03% Max P 0.25% Max Ferro-Manganese Ferro-Manganese is an alloy with high percentage of Manganese, which is made by heating a mixture of the oxides MnO2 and Fe2O3 and coal & coke with high carbon content in a blast furnace or an electric arc furnace-type system. The oxides go through carbothermal reduction in the furnaces that result in producing the Ferro-Manganese. Ferro-Manganese is used in the production of steel which acts as an excellent deoxidizer and desulfurizer. We supply the one variant of Ferro Manganese: High Carbon Ferro-Manganese.
Product-1 Mn - 82 %Min C - 0.9% Max si - 0.9% max P - 0.150% S - 0.02% Size: - 40 B.S.S. Mesh 100% passing through. Packing - as per requirement. Product-2 Mn - 76 % Min Si - 1.6% Max C - 1.1% max P - 0.25% S - 0.03% Size : - 40 B.S.s. Mesh
We are exporter of Ferro Manganese - Standard Grades Mn : 70% Min. / 76% Min Si : 1.5% Max. C : 6-8% P : 0.30% Max. / 0.35% Max. S : 0.03% Max. Size : 10 - 80/100 mm
FeMn(HC) 1. FeMn H1 - Mn : 78 ~82 - Si : 1.2max - C : 7.5max - P : 0.4max - S : 0.02max 2. FeMn H2 - Mn : 73 ~ 78 - Si : 1.2max - C : 7.5max - P : 0.4max - S : 0.02max Bulk, 1 ton bag, 50 kg bag, 20 kg bag
1. FeMn M1 - Mn : 80 ~ 85 - Si : 1.5max - C : 1.5max - P : 0.40max - S : 0.02max 2. FeMn M2 - Mn : 75 ~ 80 - Si : 1.5max or 0.5max - C : 2.0max - P : 0.40max - S : 0.02max 3. FeMn M3 - Mn : 80 ~ 85 - Si : 1.5max - C : 1.5max - P : 0.15max - S : 0.02max 4. FeMn M4 - Mn : 78 ~ 80 - Si : 1.5max or 0.5max - C : 1.5max - P : 0.15max - C : 0.02max Bulk, 1ton bag, 50kg bag, 20kg bag
1. FeMn L1 - Mn : 80 ~ 85 - Si : 1.5max or 0.5max - C : 1.0max or 0.5max - P : 0.35max or 0.20max - S : 0.02max 2. FeMn L2 - Mn : 75 ~ 85 - Si : 1.5max or 0.5max - C : 1.0max or 0.5max - P : 0.40max or 0.20max - S : 0.02max 3. ULPC - Mn : 85min - C : 0.2max - P : 0.05max - S : 0.02max Bulk, 1ton bag, 50kg bag, 20kg bag
Ferro Manganese
