Recycling Yard supplies scrap metal, Used Rail Scrap R50/R65, HMS 1 & 2 scrap. We have extensive knowledge about metals and we also care for the environment by performing environmental conservation activities. The world's resources are limited. The reuse of metals scrap is therefore essential for global environmental protection. We thus aim to market our high-quality metal scraps all over the world. Our high quality scraps are guaranteed to suit your needs! In 2002 we obtained ISO9001 and ISO14001 certification
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
Original R-50 R-65 Tee rails weighing 50 pounds per yard or more, 6 meters long and more Nominal Specification for R50 â?? 51.67 kg/m GOST 7173-75 Nominal Specification for R65 â?? 64.72 kg/m GOST 8165-75 Nominal Chemical Composition Carbon (C) 0.20% to 0.60% Manganese (Mn) 0.60% to 0.90% Silicon (Si) 0.15% to 0.35% Sulphur (S) 0.05% to Maximum Phosphorous (P) 0.05% to Maximum Arsenic (Ar) 0.15% to Maximum