A technology that creates a dim surface and renders it grainy and non-transparent (an operation contrary to polishing). The dimming allows drawing a picture on a glass surface.
The dimming is widely used in manufacture of glass and ceramic dishware, decoration elements, imitation jewelry, souvenirs, glass furniture and other glass items.
Glass dimming methods can be categorized by five groups:
dimming by mechanical treatment;
chemical dimming;
application of dimmed coating by firing;
application of dim paint coats;
other dimming methods.
Our mat is the most competitive and the best in quality over the world, which has been proven by lots of customers in many countries. Our e-glass needled mat is a mechanically bonded glass fiber insulation blanket of uniform density supplied in thicknesses of 1/8" , 1/4 ", 1/2", and 1" that offers reliable, superior performance for continuous operating temperatures up to 1000 degrees f (538 degrees c) and excursions to 1200 degrees f (649 degrees c). The e-glass needled mat is manufactured from a well-controlled assortment of long textile glass fibers to assure uniform mechanical bonding with no additional binders, thereby assuring insulation efficiency during extended exposure of elevated temperatures.
Product characteristics
Low thermal conductivity at temperatures to 1000 degrees f (538 degrees c)
Good drapability conforms to irregular surfaces
U.L listed - 0-flame spread, 0-smoke generated
Non-respirable, 9 micron filament diameter
Excellent vibration resistance, will not powder
Excellent sound absorption properties
Non-alkaline (<0.01%)
Low chlorides and fluorides
Will not contribute to metal corrosion
Odorless-will not absorb odors-clean
Will not decay or sustain mold or vermin
Moisture absorption negligible
Wdz150# glass, fiber chopped strand mat characteristics
Weight is evenly distributed per gram, , can be saturated fast, , bubbles easy, to be eliminated, , with high transparency for finished products, excellent coating model, performance, , less, consumption of, resin.
Wdz150# glass, fiber chopped strand mat application
Mainly used for, tank, winding pipe, products, , the surface layer, of the glass products. Can improve the, surface, corrosion resistance and, enhance the, compressive strength for finished fiber glass products, , prevent leakage, , prolong the service life.
Hand laying up, type glass, fiber mat, is mainly used for, hand laying up, product, with complex geometric curve, , it is with excellent coating model performance, , rapid resin, saturated speed, can, improve the strength and, corrosion resistance performance for finished glass fiber mat products.
Wdz150# glass, fiber chopped strand mat technical parameters
Model Non-alkali/alkaline Gravity(g/m2) Width¡ê¡§mm)
Wdz150# Non-alkali 150 900-3200
Wdz150# glass, fiber chopped strand mat packaging
Selling units: Single item
Single package size:, 1x1x1 cm
Single gross weight: 1.2 kg
For more information of wdz150# glass, fiber chopped strand mat, pls feel free to contact aileena
Mob:86- 18938867591
,
E-mail:, hyl(at)resinpu(dot)com
,
Skype:liaoyuzhen92
Selling units: Single item
Single package size:, 1x1x1 cm
Single gross weight: 1.2 kg
E glass chopped strand mat is made from e-glass chopped strands around 50mm in length, bonded together by powder or emulsion binder which is extremely soluble in styrene. The basic strand has a sizing system containing a silane coupling agent.
1. Excellent impregnation properties
2. Excellent conformability
3. Good mechanical properties
4. Good drapability
5. High tensile strength
Glass;Fiber Chopped Strand Mat Description
E-Glass Fiber chopped strand mat is a kind of non-woven glass fiber reinforced material, which is made by chopping glass fiber first, then be settled down non-directional and uniform, adding some powder or emulsion binder. It is mainly used for hand laying up process ;and laminating process, ;easy to process, with excellent ;forming performance. Chopped strand mat ;can be saturated with resin ;fast, ;with high ;transparency,;at the same time, uniform fiber ;makes the products ;smooth on surface ;during the lamination process,good performance on coating model.
Glass;Fiber Chopped Strand Mat Characteristics
1)Weight is evenly distributed per gram
2)Saturated fast,
3)Bubbles easy ;to be eliminated,
4)High transparency
5)Excellent coating model;performance
6)Less;consumption of ;resin.
Glass ;Fiber Chopped Strand Mat Application
Mainly used for;tank, winding pipe;products,;the surface layer;of the glass products. Can improve the;surface;corrosion resistance and;enhance the;compressive strength for finished fiber glass products,;prevent leakage,;prolong the service life.
Hand laying up;type glass;fiber mat ;is mainly used for;hand laying up ;product;with complex geometric curve,;it is with excellent coating model performance,rapid resin;saturated speed, canimprove the strength and;corrosion resistance performance for finished glass fiber mat products.
Bmz020#non-alkali glass fiber surface mat description
Glass fiber surface mat is mainly used in the surface layer of glass products. Divided into two categories: specific wound type series (s-sm)and hand lay-type series (s-hm)
Bmz020#non-alkali glass fiber surface mat characteristic
Fiber distribution evenly, finished products with smooth surface, corrosion resistance, low binder content, volt mode is good
Bmz020#non-alkali glass fiber surface mat application
Wound glass fiber mat is mainly applied to the surface of the pipe and tank wrap products, it can improve product surface corrosion resistance and enhanced compressive strength, anti-leakage and prolong life.
Hand lay glass surface mat is mainly used for hand lay products with complex geometric curve, its volt mode is good, resin penetration speed, can improve the strength and corrosion products.
Bmz020#non-alkali glass fiber surface mat datasheet
Product name Alkaline or not Gram weight
(g/m2) Breadth¡ê¡§mm)
Bmz020# Not alkali 20 20-2000
Bmz020#non-alkali glass fiber surface mat shelf life
12-24 months under the room temperature of 25c
Selling units: Single item
Single package size: 1x1x1 cm
Single gross weight: 1.2 kg
Glass fiber surface mat is mainly used in the surface layer of glass products. Divided into two categories: specific wound type series (s-sm)and hand lay-type series (s-hm)
Selling units: Single item
Single package size: 1x1x1 cm
Single gross weight: 1.2 kg
Non-alkali glass fiber surface mat description
Glass fiber surface mat is mainly used in the surface layer of glass products. Divided into two categories: specific wound type series (s-sm)and hand lay-type series (s-hm)
Non-alkali glass fiber surface mat characteristic
Fiber distribution evenly, finished products with smooth surface, corrosion resistance, low binder content, volt mode is good
Non-alkali glass fiber surface mat application
Wound glass fiber mat is mainly applied to the surface of the pipe and tank wrap products, it can improve product surface corrosion resistance and enhanced compressive strength, anti-leakage and prolong life.
Hand lay glass surface mat is mainly used for hand lay products with complex geometric curve, its volt mode is good, resin penetration speed, can improve the strength and corrosion products.
Non-alkali glass fiber surface mat datasheet
For more information of bmz020#non-alkali glass fiber surface mat, pls feel free to contact amber
Tel: +86-0755-89311348
Mob: +86-18938867544
Skype: amberqu2
Email: hyresin@outlook.Com
Non-alkali glass fiber surface mat shelf life
12-24 months under the room temperature of 25c
Non-alkali glass fiber surface mat packaging
Selling units: Single item
Single package size: 1x1x1 cm
Single gross weight: 1.2 kg
