Please provide a quotation to the following requirement from importer -
Product : Steel Plate Carbon, Hot Rolled, Alloy
Specifications:
STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X
WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM)
NO.35 Cr. Mn SiA
CHEMICAL COMPOSITION
C=0.32-0.39% Si=1.10-1.40%
Mn=0.80-1.10% Cr-1.10-1.40%
P=Max 0.025% S=Max 0.025%
Cu= Max 0.25% Ni = 0.30%
MECHANICAL PROPERTIES
Tensile strength=600-800(MPa)
Elongation = 16% Min
Quantity: 30,400 Kg.
ITEM # 2:
STEEL PLATE CARBON, HOT ROLLED, ALLOY
STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X
WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM)
NO.35 Cr. Mn SiA
CHEMICAL COMPOSITION
C=0.32-0.39% Si=1.10-1.40%
Mn=0.80-1.10% Cr-1.10-1.40%
P=Max 0.025% S=Max 0.025%
Cu= Max 0.25% Ni = 0.30%
MECHANICAL PROPERTIES
Tensile strength=600-800(MPa)
Elongation = 16% Min
Quantity: 35,700 Kg.
SPECIAL CONDITIONS: To be followed by Shipper/Maker;
1. Same (Single) competitive Unit Rate must be quoted against the same tendered items.
2. Full Qty falling in both inspection authorities must be quoted otherwise offer will be ignored.
3. Sample to be provided by the firms within 15 x days of technical opening except last Supplier,
4. Validity of offer at least 90 days (Extendable if required) would be considered w.e.f
commercial opening of tender (s) after acceptance of technical offers
5. Conditional offers are likely to be ignored.
6. Needful supporting technical literature/ Catalogue/ Brochure against each tender it
must accompany technical quotation if requisite/relevant technical literature found
missing, quotation will be considered rejected.
7. Performance Bond (in shape of CDR/B.G) should be provided against L.O.I for issuance of formal contract. However,
20 The supplier will render a Warranty / Guarantee Certificate for a period of 12 x months
from final acceptance of store
21 Protocol of inspection will be followed as per inspection authorities.
Further requirements:
· Supplier type: manufacturer
35 tons approx
Quantity Required : 35 Ton/Tons
Shipping Terms : CIF
Destination Port : Pakistan, Pakistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Rashid Akhtar
Buyer: Chequered Plate
Buyer: Reinforced steel bars (tmt bars), hot rolled & cold rolled coils, cs plates, ss plates, channels, angles, beams, pipes, structural steel, chequered plates, and metal scraps.
Supplier: Hydraulic bale press, fatka machine, plastic scrap grinder, plastic recycling plant, bio compactor.
Buyer: M s plates and channel, i beam, hydraulic cylender, power pack.
Buyer: Reinforced steel bars (tmt bars), hot rolled & cold rolled coils, cs plates, ss plates, channels, angles, beams, pipes, structural steel, chequered plates, and metal scraps
Supplier: M/s billets , m/s ingots ,tmt etc
Buyer: M/s scrap , cast iron scrap , m/s plates, profile plates
Supplier: Steel Petrol Tanks.
Buyer: Steel Slabs, Billets, De Bars, Wire Rods, Angles, Round Square Flat T Bars, Unp Ipn Ipe Hea Heb Beams, Hr Coils/ Sheets/ Plates, Chequered Plates, Cr Coils/ Sheets, Hdg Coils/ Sheets, Pre Painted Coil/ Sheets, Corrugated & Trapezoid Sheets, Galvalume Coils/ Sheets, Erw Tubes (structural, Water & Gas), Hollow Sections ( Square & Rectangular Tubes), Saw Pipes.
Supplier: Automatic and mechanical car parking lifts.
Buyer: Sheets/plates, chequered plates, galvanized sheets, hollow sections ( square & rectangular tubes),
Buyer: Reinforced steel bars (tmt bars), hot rolled & cold rolled coils, cs plates, ss plates, channels, angles, beams, pipes, structural steel, chequered plates, and metal scraps.
