Standards ASTM / ASME B861, B862, B338 / SB861, SB862, SB338 Outer Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24â?? NB Thickness 0.3mm â?? 50 mm Type Seamless / ERW / Welded Pipes Schedule SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS Seamless Pipes & Tubes Size 1 / 8â?³ NB â?? 24â?³ NB ERW Pipes & Tubes Size 1 / 8â?³ NB â?? 36â?³ NB Length Single Random, Double Random & Required Length End Plain End, Beveled End, Treaded
Standards ASTM / ASME B265 / SB265 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc
Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Titanium ore per month to any destination.
- Material: ASTM B337, ASTM B338 Gr 1, Gr 2, Gr 3, Gr 7, Gr 9, Gr 12, Gr 16; - Technical: Seamless; - Process: Cold Rolled, Annealed or CWSR; - Grade: Gr.1 (CP titanium, low oxygen), Gr.2 (CP titanium, standard oxygen), Gr.7 ( Ti-Pa, standard oxygen), Gr.9 (Ti-3Al-2.5V), Gr.11 ( Ti-Pa, low oxygen), Gr.12 (Ti-Mo-Ni), Gr.16 (Ti-Pa,standard oxygen), Gr.17 (Ti-Pa,low oxygen) - Diameter: OD 6.0-273 mm, Wall thickness 0.3-22 mm, Length Within 18000 mm or Customized; - Application: Heat exchangers and condensers, Corrosive fluid transmission pipeline system, Titanium bicycle tube, automobile exhaust pipe,Offshore aquaculture; - Features: Light weight, excellent corrosion resistivity, strongly heat-resistance, high strength. - Inspection: Ultrasonic testing, Hydrostatic testing, Flattening testing, visual surface inspection, Dimensional inspection, tensile properties inspection and Chemical elements analysis.
1. Manufacturing Technique Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. 2. Properties of titanium sintered porous materials: Pore diameter uniformity, pore stability, high separation efficiency. High porosity, low filtration resistance, and high permeability. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance. Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements. Good mechanical properties, low differential pressure, large flow. Strong anti-microbial ability, does not interact with microorganisms. Online regeneration, easy cleaning, long service life. Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry. Excellent electromagnetic shielding performance. Good damping and shock resistance. 3. Application of titanium sintered porous materials Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials, noise-canceling materials according to their physical and structural properties. Decarburization filtration of pharmaceutical liquids. Electrolytic gas industry precision filtration, gas distribution. The medical industry makes biological implants. Water treatment industry odor sterilization filtration and ozone aeration. Clarification and filtration in food and beverage processing. Prefiltration of reverse osmosis system for the electronics industry. Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry. High-pressure air filtration in the aerospace industry. Filtration and recovery of the precious metal catalysts in the fine chemical industry. The electrode matrix of a fuel cell. Catalyst carrier in gas and liquid catalytic reactions. 4.Precautions for the use of titanium sintered porous materials: During installation, disassembly and clean avoid scratches, collisions and falls on hard objects. When using, the filtrate is filtered from the outside in to avoid the reverse direction. Avoid instant pressurization when the filter element works. When the filtration efficiency is less than 50%, the filter element should be cleaned in time. When cleaning the filter element, the first backflow with pure gas, backflow pressure is 1.5 times the working pressure, each time for 3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5 minutes, repeat 2-3 times. If the filter element is not good after online back blowing and backwashing, it should be removed and cleaned in time.
Sheet :Thickness:0.6-10mm Max Length:1000mm Max width:340mm Pipe : OD10-150MM* wall thickness 2-5MM Materials : titanium GR1 GR2 Feature: 1.Working Temperature:-200-1000°C 2.Corrosion Resistance 3.High Filtering Efficiency 4.Metallic capacities, such as noise reduction,hot resistance,heat conduction,high strength and etc 5.Easy to welding and long working life Filter Shape: Could be cartridge filters,disc filters ,cup filters,cap filters,filter palte and etc Application: separation and purification of solid-liquid, gas-liquid and gas-solid in the petrifaction, hydraulic manufacturing and medical apparatus and instruments of basic industries. Technique parameters titanium powder sintering filter element technique parameters using temperatur:â?¤300°C filtering level filtration precision um maximum diameter um permeability coefficient 10-12m2 permeability m3/h.m2.kpa thickness mm compression strength Mpa/cm3 T9 0.2 2.5 1.5 0.6-10 3 T8 0.5 4 3 0.6-10 3 T7 1 6 5 0.6-10 3 T6 2 10 15 0.6-10 3 T5 5 15 0.04 40 0.6-10 2.5 T4 10 30 0.15 120 0.6-10 2.5 T3 20 60 1.01 250 0.6-10 2.5 T2 30 100 2.01 500 0.6-20 2.5 T1 50 160 3.02 800 0.6-20 2.5 The product performance can achieve and even exceed GB. The internal pressure of powder rolled and roll tube welding is more than 0.3Mpa
Mainly used in separation and filtration petrochemicals, liquid drug manufacturing, medical equipment, and other fields. Material: titanium Specifications:max.Width 340mm, max.Length 1000mm, max.Thickness 3.0mm Precision:0.2 to 65um
Product Introduction Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Sintered porous titanium plates are used in various applications where a high level of strength and durability is required, such as in the aerospace, automotive, and medical industries. Parameters Material: Titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm Dia: 1MM above Features 1. High Strength-to-Weight Ratio: Sintered porous titanium plates have a high strength-to-weight ratio, which means they are strong and durable while also being lightweight. This makes them ideal for applications where weight is critical, such as in the aerospace industry. 2. Corrosion Resistance: Titanium is highly resistant to corrosion, making it ideal for use in harsh environments where other materials may corrode or degrade over time. This makes sintered porous titanium plates a good choice for applications in the chemical and petrochemical industries. 3. Biocompatibility: Titanium is biocompatible, which means it is not toxic to living tissue and does not cause adverse reactions when implanted in the human body. This makes sintered porous titanium plates ideal for medical applications such as implants and prosthetics. 4. Customizable Pore Size and Distribution: Sintered porous titanium plates can be customized to have specific pore sizes and distributions, which makes them useful for applications such as filtration and catalysis. 5. High-Temperature Resistance: Titanium has a high melting point and can withstand high temperatures, making it ideal for use in high-temperature applications such as heat exchangers and furnace components. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then molded and pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.