Keeping in mind ever-evolving requirements of our respected clients, we are offering a premium quality range of. THERMOPLASTIC RUBBER (TPR) COMPOUNDS Features: Excellent flexing fatigue resistance Resistance to low and high temp. Ranging from -50 to +125 degrees Celsius High impact strength Low specific gravity Excellent resistance to chemicals & weathering Good tear and abrasion resistance High colourability Can be recycled Suitable for injection and extrusion moulding Excellent anti-skid properties Terms & Conditions :- GST Extra 18% Destination Freight Extra or will be born be by you Rates are F.O.R. Delhi Godown Payment Terms - Via Bank Transfer before Despatch Ready Stock
Just provide us your beautiful artworks for our existing items. OEM enquiries are welcome
Supplier: Pp, thermoplastic rubber
Supplier: Tpr/tpe (thermoplastic rubber/thermoplastic elastomer)
Supplier: Butadiene rubber like thermoplastic styrene
Supplier: Rubber, plastic & thermoplastic elastomer
Services: Indenting agent service from india, china, singapore, Japan & USA
Buyer: Rubber & plastic raw materials
Supplier: Thermoplastic styrene butadiene rubber, styrene butadiene rubber, synthetic rubber
EKASWELL SB850, Thermoplastic Elastomer (TPE) based hydrophilic particles with high swelling and long cycle capacity. Application areas: Indoor and outdoor places. Pools, water tanks, treatment plants. In basic-curtain combinations. Pipe inlet and outlet. Construction joints in cable ducts. In tunnel segments. In the joints of old and new concrete. Used in construction joints. Advantages: Easy application. Flexible. Controlled swelling does not inflate suddenly in concrete casting and does not damage concrete. It is resistant to high salt concentration and various chemicals, There is no disintegration and. The cycle capacity is high. Technical Features: Ekaswell SB850: Calculated at 23 C. Expansion rate: %850. Elongation at break: %490/770. Tensile strength: 1.2/2.2 Mpa. Color: Beige, Blue, Red, Yellow, Green (can be produced in all colors). Density: 1,25 g/cm3. Hardness: 40. Application temperatures: -30C / 70C.
Thermoplastic elastomer based EKAFLEX is a permanently elastic dilatation band used in joints of all types of construction and expansion joints. Application Areas: In underground applications - underneath the plants. In waterproofing of horizontal / vertical dilatations. In the insulation of wide and irregular cracks. In elastic waterproofing of base-parapet connections. In the joints of different building materials such as steel construction and reinforced concrete. In the swimming pool and wastewater units. It is used in tunnel and similar underground structures. Advantages: UV resistant. High resistant to plant roots. Resistant to bacterial attacks and chemical degradation. High resistant to environmental influences and aggressive environments. Easily processable. High elasticity. Method of Application: Surfaces must be clean, free from carriers and loose particles. EKAFIX Application: EKAFIX (Epoxy adhesive) has two components. Component A (3.75 kg) and Component B (1.25 kg) are mixed in a low-speed mixer until homogenous before mixing. With trowel and spatula, EKAFIX (Epoxy Adhesive) is applied to the dilatation sidewalls with a thickness of approximately 1.0 - 1.5 mm. The application width should be at least 40 mm for the 20 cm tape, and at least 50 mm for the tape 30 cm. To ensure strong adherence, the adhesive must be thoroughly applied. EKAFLEX Application: The areas to be applied should be identified and the appropriate tape lengths should be prepared. The tapes to be added are prepared by boiling them with hot air gun before application. The EKAFLEX Band is laid on the adhesive layer and with the help of a suitable roll, full contact is established between the tape and the adhesive layer. In the same way, EKAFIX Epoxy Adhesive is applied to the top surface of the band. The application is done with a thickness of 1.0 - 1.5 mm and a band of at least 20 mm, the layer is allowed to harden. EKAFIX Epoxy Adhesive tape should not be moved, lifted and must be protected against water and/or mechanically stressed until it is fully hardened. It is important to consider that, in cold weather the drying time of the adhesive is longer than it is in hot weather.
