Supplier: Folder gluer, carton pasting machine, corrugated box making, folder guler machine, corrugated cardboard folder, paper box folding and gluing machine
Supplier: Folder gluer, carton pasting machine, corrugated box making folder guler machine, corrugated cardboard folder, paper box folding and gluing machine
Characteristics: 1.Driving by synchronous belt,ensure smooth and accurate running. 2.Inverter driving,stable and power saving. 3.Use electric adjust,easy operate. 4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable. 5.Automatic counting and kicking,quantity can preset. 6.Conveyer pressure adjustable according to the box to ensure best quality. 2. Main technical parameter: Model ZH-A1100PC Suitable material Card board,E flute corrugated board Max method Automatic continuous feeding Max mechanical speed 450m/min Overall dimension 15500*1700*1800mm Weight 8T Power consumption 19KW 3.Standard & Optional configuration list Configuration Units Standard Optional 1 Feeder section 2 Paper Alignment Section 3 Pre-fold Section 4 Crash lock bottom section 5 Upper paste barrel equipment 6 Down pasting equipment 7 Gluing system 8 Grinder device 9 Plasma treatment system 10 Folding and closing section 11 Trombone section 12 Air compressor 13 4-6 corner
Model ZH-780DA Top speed 240m/min Sheet applicable 250-800gsm card board,E corrugated paper Electric power single phase 380V,6.2KW A side Max paper in size 780mm A side Min paper in size 150mm B max finished product in size 380mm B min finished product in size 70mm C side longest paper 700mm C side shortest paper 50mm D side min pasting side 8mm Overall dimension 11000*1400*1500mm Weight of machine 4500kg Casting construction 40mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free.  If parts (except wearing parts) are broken within guarantee time they will be changed for free.  (it is not caused by human factor) The client should pay for the cost following:      1. Visa fee    2. Air ticket    3. Diet    4. Accommodation    5. Labor fee:50 USD/day (within guarantee time)     100 UD/day (without guarantee time)
Overview Type: Other Condition: New Application: Other Packaging Type: Other Packaging Material: Metal, Wood Automatic Grade: Semi-Automatic Driven Type: Electric Voltage: 220V Power: 20.5kw Place of Origin: Zhejiang, China (Mainland) Brand Name: ZIHONG Model Number: ZH-1450PC Weight: 15.8T Dimension(L*W*H): 15800*2350*1500mm Certification: CE ISO After-sales Service Provided: Engineers available to service machinery overseas ------------------------------------------------------------------------------------------------------------------- SupplyAbility SupplyAbility: 50 Set/Sets per Month ------------------------------------------------------------------------------------------------------------------- Packaging & Delivery Packaging Details: wood package Port Ningbo Lead Time :45 workdays ------------------------------------------------------------------------------------------------------------------- Product Introduction Model ZH-1450 Suitable material Card board250-850gsm,E/B/flute corrugated board Max method Automatic continuous feeding Max mechanical speed 260m/min Overall dimension 15000*2350*1650mm Weight 9T Power consumption 18.5KW Model ZH-1450 Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free.  If parts (except wearing parts) are broken within guarantee time they will be changed for free.  (it is not caused by human factor) The client should pay for the cost following:      1. Visa fee    2. Air ticket    3. Diet    4. Accommodation    5. Labor fee:50 USD/day (within guarantee time)     100 USD/day (without guarantee time)
Model ZH-780DA Top speed 240m/min Sheet applicable 250-800gsm card board,E corrugated paper Electric power single phase 380V,6.2KW A side Max paper in size 780mm A side Min paper in size 150mm B max finished product in size 380mm B min finished product in size 70mm C side longest paper 700mm C side shortest paper 50mm D side min pasting side 8mm Overall dimension 11000*1400*1500mm Weight of machine 4500kg Casting construction 40mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free.  If parts (except wearing parts) are broken within guarantee time they will be changed for free.  (it is not caused by human factor) The client should pay for the cost following:      1. Visa fee    2. Air ticket    3. Diet    4. Accommodation    5. Labor fee:50 USD/day (within guarantee time)     100 UD/day (without guarantee time)
ESecond, the machine main components The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control. Agencies main configuration and specifications (A) unwinding institutions The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled. Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum. Unwinding specifications: maximum width of700mm, phi diameter 1000mm Paper tube clamping method: air shaft clamping Specifications: 3in 1 root of the air shaft 1 piece A pneumatic gun 1 piece Tension control: closed-loop tension control. The output control: 200N.M 1 piece magnetic brakes 1 piece Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution. Specifications: photoelectric eye 1 piece Two linear bearings4 piece A corrective institutions 1 piece The photoelectric eye fine-tuning 1 sets (B) cutting machine configuration M, mechanical speed 150M/min
Characteristics: 1.Driving by synchronous belt,ensure smooth and accurate running. 2.Inverter driving,stable and power saving. 3.Use electric adjust,easy operate. 4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable. 5.Automatic counting and kicking,quantity can preset. 6.Conveyer pressure adjustable according to the box to ensure best quality.
Model ZF-380A Fully automatic Multi-functional envelope and paper bag making machine is kind of advanced equipment which adopted the high Tech. from the foreign countries and improved the limits of the same field. It equips with the advanced automatic creasing function which can shape the paper exactly during quick operation. This machine also can fold and feed paper naturally, which ensure changing printing style automatically in the process of producing. 1.Reliable sheet separation 2.Non stop feeder 3.Easy regulation and paper positioning, accurate paper positioning 4.ensuring under high speeds. 5.Trouble Free Delivery. 6.High Production efficiency. 7.Operator Friendly. Our advantage: 1.The sale amount is the top one in china 2. Advanced technology regarding envelope making machine 3. highly cost-effective 4.After sale service: timely and considerate Technical parameter: Model ZF-380 Applicable Paper grams 70-200 g/m2 Working speed 5000-15000pcs/h Motor power 4.5kw Envelope size 70x70-230x160mm Weight 1350kg Machine size 3950x1150x1200mm Process Sequence: Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
