Product introduction:
1, solar street light controller can automatically adapt to 12V and 24V systems.
2. It has a dual-period control function (lit at night and before dawn) to meet the individual needs of customers for street lamps.
3. There are three kinds of load power supply modes: pure light control, light control on + delay off (single time), light control on + delay off - delay on + light control off (double time).
4. The dual-period solar street light controller adopts intelligent machine design. All work processes are controlled by software and can achieve high precision and high reliability.
5, using high-efficiency PWM charging technology, with high-precision temperature compensation.
6. The digital tube displays the operating parameters of the LED lamp.
7, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse and other full electronic protection.
8, the whole machine adopts full potting process, waterproof rating IP68.
1. Increase the charging current, compared to the traditional PWM controller, MPPT charging efficiency can be increased by 10-30%. (Controller conversion efficiency> 95%)
2 can be selected by DIP switch 4 batteries. GEL battery, lead-acid (liquid) battery, AGM2 battery, LiFePO4 lithium iron phosphate battery
3. With load output, with over discharge, overload, short circuit protection.
4. With Bluetooth function, you can view the controller parameters through the phone APP display (MPPT5020-BT models only)
5. Automatic unattended charging. With overload, overheating, reverse current protection (cloudy or no sunlight at night, to prevent the battery back to the solar panel)
6. Overcharge protection. When the battery is full, the charging current will be reduced, when the battery is dead, it will immediately charge the battery
7. Automatic temperature compensation. Ensure the battery in the low temperature or high temperature environment, the use of charging parameters to extend battery life
It is strongly recommended not to install the battery and controller in place of heat source, so as to avoid controller's misoperation.
Shenzhen OLYS Technology 12 years focused on the development and manufacture of solar controller, master the core of solar energy, service more than 300 new energy companies.
Product introduction:
1, MPPT lithium battery solar street light controller automatically adapts to 12V and 24V systems.
2, built-in boost type constant current source, the efficiency can reach above 95%.
3, with 4 working modes, working time and LED lamp brightness can be adjusted.
4, with infrared remote control function, all parameters can be set using a remote control key. Can also be used to set the button, directly 5, displayed on the digital tube.
6. The integrated street light controller has a smart power-down function to extend the working hours of the LED lights.
7. High-efficiency PWM charging technology is adopted to ensure that the battery is working in the best condition, which greatly prolongs the service life of the battery and has high-accuracy temperature compensation.
9, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse protection.
10, full plastic, metal body, waterproof and drop, to deal with various harsh environments.
(1)adopt advanced mcu design, conforming pwm charging controlling technology with strong reliability and anti-disturb capability.
(2)adopt solar energy as power source without waste of regular energy.
(3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage.
(4)with perfect capability, to protect acid battery from over discharge
(5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on
(6)work under diferent surroundings.
(7)memory fu nction: startup load mode and main circuit�??s working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Charge mode, pwm
System voltage, 12v/24v
Charge current: 10a/20a
Output voltage: 12v or 24v
Battery type, lead acid (gel, agm, flooded)
Application ,
1.Street light
2.Advertising lights
(1)adopt advanced mcu design, conforming pwm charging controlling technology, with strong reliability and anti-disturb capability.
(2)adopt solar energy as power source without waste of regular energy.
(3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage.
(4)with perfect capability, to protect acid battery from over discharge
(5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on
(6)work under diferent surroundings.
(7)memory function: startup load mode and main circuits working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
High flexibility, fit all kinds of roofing.
Covenient installation and transportation, saving a lot of costs.
Lead-free environmental protection, green photovoltaic concept.
Lightweight ultra-thin design to meet project needs.
It can be customized to meet various scenarios.
High reliability in harsh environment testing.
