Glass beads-JGB GBT-has been selected and classified based on the refraction, reflection, roundness and the ratio of uniform of the beads. JGB GBT, the beads size is fine, is used in the normal road marking reflection paint that requested the thin and fine paint layer. JGB GBT meets the standard GB/T24722:2009 #1. Excellent for road marking, specially to improve the visibility at night. ***JGB GBT: External: transparent, clean, no bubble, no impurity Roundness: 80% Refraction index: 1.50
Glass beads for road marking paint for roads, parkings, airport run ways and a lot more
2020 hotsales glass beads for road marking paint BS6088A BS6088B The glass beads,composed of Si,Na and Ca,are broken and calcined by high temperature after which the said microspheres are obtained.With properties of the high roundness rate,better hardness,excellent anti-friction and direct reflect light .They are widely applied in the fields of plastic rubber,abrasion ground,blast derusting,road-reflect dope and handicraft lamp,etc. Size:BS6088A BS6088B SiO2: 65%min Na2:14%max CaO: 8%max Packing: 25kg pp bag, 40bags into 1 jumbo bag
Reflective road marking paint micro glass beads BS6088A BS6088B The glass beads,composed of Si,Na and Ca,are broken and calcined by high temperature after which the said microspheres are obtained.With properties of the high roundness rate,better hardness,excellent anti-friction and direct reflect light .They are widely applied in the fields of plastic rubber,abrasion ground,blast derusting,road-reflect dope and handicraft lamp,etc. Size: BS6088B SiO2: 65%min Na2:14%max CaO: 8%max Packing: 25kg pp bag, 40bags into 1 jumbo bag
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Glass beads for road marking 1.Improve the road marking line contrary reflection function. When driving at night, the lamp shines on the marking line with glass bead in it, the ray of lamp is reflected back parallely. So the driver can look at the road clearly and drive safely at night. 2. Products according to international standard include: jt/t 446-2001, english bs6008, korean, ks and american aashto etc. 3. You can choose different size glass bead between 50um-1180um according to different function. 25kg/bags, 40bags/pallet, using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp.The net weight of each bag is 25f+0.2kg.
Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.
Details: 1.Place of original: CHINA 2.Material: Glass 3.Proportion: : 2.5g/m3 4.Bulk density: 1.5g/m3 5.Mohs hardness: 6-7 6.Rockwell hardness: 46HRC 7.Usage: Road-marking glass;Sandblasting ; Weighted Blanket, toy filling. 8.Reflective: 1.5-1.7 9.Packages: 25kg PPbag, 1MT Jumbo bag, pallet, 25kg paper bag or as customer's requirement. 10.Certificate: ISO9001, 11.Sample: free 12.MOQ: 1ton 13.Color: Transparent
Our products win the good reputation in the international market for the superior quality and competitive price. Reflective glass beads for road marking is one of most popular products, all types are available in our company, such as BS6088A/B, EN1423 /EN1424, AASHTO M247 type1/2/3, KSL2521 No.1/2, JIS R3301, etc. And also we can produce the glass beads according to the client's specification.
