PPGL/PPGI Prepainted Galvalume/ Galvanized Steel Coil Thickness: 0.13mm-1.0mm Width: 750-1250mm Coating: AZ30-AZ150/ Z30-Z180 Top Coating: 5+10-25micron Back Coating: 6-30micron Coil Weight: 3-7MT Production Capacity: 50,000MT /Month
1. Width: 30~1250mm 2. Thickness: 0.13~0.8mm 3. Grade: JIS G3312-CGCC, CGC340-570, (G550) ASTM A755M CS-B, SS255-SS550 4. Coil Weight: 3~5MT 5. Coil ID: 508mm/610mm 6. Chemical Treatment: Chromated (Cr 3+, 6+, 0+) 7. Surface: Skin pass/Non Skin Pass 8. Oil: Slight Oiled/Dry 9. Spangle: Mini/Regular/Zero/Big 10. Zinc Coating: 30g~150g/m2 (both side total coating thickness) 11.Color Painting:Top:20-25um,Back:5-20um 12. MOQ: 25MT per size/color 13. Packing: Standard Export Packing
Supplier: PPGI,PPGL,GI,GL steel coil and sheets
7. RAL NO.as per required 8. Special Use: High-strength Steel Plate 9. short delivery time 11.Coils width:40-1250mm or as your requirement 12.Coils weight: 3-8 tons 13..zinc coating: 40-275g/m2 14.Quality standard:GB/T251B JIS G3002 1.Each bare coil to be securely tied with two bands through the eye of coil (or not) and one circumferential. 2.the contact points of these bands on the coil edge to be protect with edge protectors. 3.Coil then to be properly wrapped with water proof /resistant paper, it then to be properly and completely metal wrapped. 4.Wooden and iron pallet can be used or as your requirements. 5.And each packed coil to be properly wrapped with band, three-six such band through the eye of coil at about equal distance, and two-four such bands securely tied around belly of coil at about equal distance
1. Width: 30~1250mm 2. Thickness: 0.13~0.8mm 3. Grade: JIS G3312-CGCC, CGC340-570, (G550) ASTM A755M CS-B, SS255-SS550 4. Coil Weight: 3~5MT 5. Coil ID: 508mm/610mm 6. Chemical Treatment: Chromated (Cr 3+, 6+, 0+) 7. Surface: Skin pass/Non Skin Pass 8. Oil: Slight Oiled/Dry 9. Spangle: Mini/Regular/Zero/Big 10. Zinc Coating: 30g~150g/m2 (both side total coating thickness) 11. MOQ: 25MT per size/color 12. Packing: Standard Export Packing
PPGL/PPGI Prepainted Galvalume/ Galvanized Steel Coil Thickness: 0.13mm-1.0mm Width: 750-1250mm Coating: AZ30-AZ150/ Z30-Z180 Top Coating: 5+10-25micron Back Coating: 6-30micron Coil Weight: 3-7MT Production Capacity: 50,000MT /Month
GL/GI Hot Dip Galvalume/ Galvanized Steel Coil Thickness: 0.13-1.2mm Width: 750mm-1250mm Coil ID: 508/610mm AZ/ Zinc Coating: AZ30-AZ150/ Z30-Z180 Spangle: Zero, Mini Production Capacity: 80,000MT/Month
Supplier: PPGI & PPGL & GI & GL steel coil, sheet, strips, corrugated steel sheet
Supplier: PPGI, GI, PPGL, GL, EG steel coils
