Size Range 015 mm to 63 mm Moisture Content Typically 8 12 Bulk Density 20 to 25 tonnesm Angle of Repose 35 to 40 Specific Gravity 45 to 50 Porosity 35 to 40 Surface Area High Due to fine granularity Color Reddishbrown Abrasion Index Low Depends on mineral content Flowability Poor due to fine size
Iron Ore Pellet
Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.
IRON ORE PELLETS Fe 64% monthly volume 50,000 mt. Full specification is available on request, Iron Ore Pellets: Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste. The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more. Product Type: IRON ORE PELLETS Fe (T) 64 % Si02 1.150 % Fe0 0.75 Max Ti02 0.021% Al2O3 0.319 % Ca0 1.170 % P 0.032 % S 0.031 % V205 0.004 % Cu 0.057 % N2O 1.290 % Mg0 0.069 % CCS 309 Size 16-19 mm - 7 % 09-16 mm -91 % 06-09 mm 2 % Tumbler Index- for above 6.3 mm 96.2 % - 95 % min Abrasion Index â??for 0.5 mm 3.8 % - 4 % max Sticking Index 950 deg C 20.1 % Bulk Density 2.17 % Compression Strength 270 Kg / Pellet / 150 kg / pellet Fines below 5mm (-) 5 mm 3 % max Reducibility index 55-65 % . NOTE: Interested parties please contact us with your LOI
Iron ore is a mineral substance which, when heated in the presence of a reductant, will yield metallic iron (Fe). It almost always consists of iron oxides, the primary forms of which are magnetite (Fe3O4) and hematite (Fe2O3). Iron ore is the source of primary iron for the world's iron and steel industries. It is therefore essential for the production of steel, which in turn is essential to maintain a strong industrial base. Our monthly ability to export Iron Ore is of 2000-5000MT per month.
Features Of Iron Ore Iron ore is the main raw material that is used in the manufacturing of steel. 98% of the mined iron ore goes in the steel production. India has rich deposits of Iron Ore and is among the top 10 exporter of iron ore in the world. Applications Iron and Steel Industry
Iron ore is a crucial raw material used in the production of iron and steel. It is a rock or mineral from which iron can be extracted economically. The main types of iron ore are hematite and magnetite, with goethite and limonite also being important sources
We are counted amongst the leading names of the company that is into offering Iron Ore. The products offered by us are of very fine quality. These products have rich content of iron as a result the users get relatively high amount of iron. Our products are very easily enriched as a result our clients save their precious time and money. We supply Iron Ore in different types- Iron Ore Lumps (Hematite & Magnetite) Iron Ore Fines (Hematite & Magnetite)
Magnetite Iron Ore
