Hole 4 5 8 10 Diameter 18" 19" 15" 16" 17" PCD: 120mm, 108mm, 112mm, 100mm, 114.3mm ET: 20mm, 30mm, 35mm, 25mm Warranty: 3 years Material: Aluminium alloy Finishing: Gloss Black with Machine Face Width: 6.5/7/7.5/8.0/8.5 Design: Multi Spoke Model Number: REW027 Product Name: Alloy Wheels Size: 15 16 17 18 19inch Color: any colour available Type: casting alloy wheels
Size:20*9.5 offset:10 colour:face machine Standard packing
SIZE ET PCD CB 15X6.5 20 4X100-114.3 54.1-73.1 30 4X100-114.3 54.1-73.1 30 5X100-114.3 54.1-73.1 16X6.5 20-35 4X100-114.3 54.1-73.1 30-35 5X100-114.3 54.1-73.1 17X7.5 20 4X100-114.3 54.1-73.1 30-35 4/5/8/10X100-114.3 54.1-73.1 30-35 4X100-114.3 54.1-73.1 30-35 5X100-120 54.1-73.1 15X6.5 20-30 4X100-114.3 54.1-73.1 25-30 4/5/8/10X100/120 54.1-73.1 30 5X100-114.3 54.1-73.1 16X7.0 25-30 5X100-120 54.1-73.1 25-30 4/5/8/10X100/120 54.1-73.1 17X7.5 25-30 5X100-120 54.1-73.1 25-30 4/5/8/10X100/120 54.1-73.1 18X8.0 35-42 5X108-120 54.1-73.1 19X8.5 35-45 5X108-120 54.1-73.1
Item: ar10-06b Size: 10''x8'' pcd: 4íß110-115mm et: -2mm cb: 70mm Carton
We are a leading producer and exporter of car wheels in all sizes,our products have been VIA,ISO9001 and TS certified. For detailed information
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Inconel nickel alloy It is a solid-solution strengthened nickel-based deformed superalloy with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance. It has good tensile properties and fatigue properties from low temperature to 980 �° C, and is resistant to salt spray. Stress corrosion in atmosphere. Therefore, it can be widely used in the manufacture of aero-engine parts, aerospace structural parts and chemical equipment. The alloy has good processing and welding properties, and can supply a variety of plates, bars, pipes, wires, strips and forgings