Corrugator Belt & Spare Parts Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines.
Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines. Corrugator belts Inwoven Aramid Edge- Specification Product Corrugator Belt Inwoven Aramid Edge Thickness 8mm-10mm Width range 1000mm - 3200mm Length 8Suitable position Top belt,Bottom� belt,Upper belt ,Lower belt
Corrugator Belt & Spare Parts Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines. Corrugator belts Inwoven Aramid Edge- Specification Product Corrugator Belt Inwoven Aramid Edge Thickness 8mm-10mm Width range 1000mm - 3200mm Length 80 meters Heat-resistance 240 (the kevlar edge upto 350) Tensile strength 70Mpa Coefficient of friction 0.40 Weight per unit (7.50.3)kg Air-permeability 40mm water Column 2.0mmin Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm or 200mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt Lifetime 50-70 million meter Used on all corrugators high tearing resistance Long life time running High abrasion resistance Moisture absorption Heat resistance Low noise Corrugator Belts with Silicone Coating Technical Parameters Product High Speed Corrugator Belt Thickness 9mm Width range 1400mm - 3200mm Length 80 meters Heat-resistance 240C (the kevlar edge upto 350C) Tensile strength 70Mpa Coefficient of friction 0.40 Weight per unit (7.5 0.3)kg/m2 Air-permeability 40mm water Column 2.0m m2/min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm -400mm inwoven aramid edge reinforcement (kevlar)
Corrugator belt is used to produce all kinds of corrugated board. It is made of the high grade PET continuous filament yarn with high tension and low flexibility. Our special structure design ensure the hydrophilic and drying ability
Features 5-layer woven fabric Composition of cotton, synthetic and IFDY High moisture absorption and release; Low noise and high speed Woven structure, anti-skidding Introduction The corrugator belt also named the Corrugated board conveyor belt. Corrugator belt is for corrugated board production line and developed specifically for Double Facer. Corrugator belts consistently keep the fastest absorption & release of moisture, which secures high-quality cardboards with less consumption of heat and energy, and higher speed is assured. Corrugator belt have been specially developed for the transport of board and optimization of the drying process,they resist the stress continuously and achieve as long a life as possible. Type Normal High-speed corrugator belt & High-speed corrugator belt with Kevlar edge YK-K --- Reinforced Edges Kevlar armored on both edges ----------------------------------------------------------- Width: 1400-3200mm Speed: 100-300m/min Kevlar edge: 100-200mm Suitable for: Top and Bottom Belt Change cardboards width frequently, or hotter plates.
Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines. Corrugator belts Inwoven Aramid Edge- Specification Product Corrugator Belt Inwoven Aramid Edge Thickness 8mm-10mm Width range 1000mm - 3200mm Length 80 meters Heat-resistance 240 (the kevlar edge upto 350) Tensile strength 70Mpa Coefficient of friction 0.40µ Weight per unit (7.5±0.3)kg/ Air-permeability 40mm water Column 2.0m min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm or 200mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt Lifetime 50-70 million meter Used on all corrugators high tearing resistance Long life time running High abrasion resistance Moisture absorption Heat resistance Low noise Corrugator Belts with Silicone Coating Technical Parameters Product High Speed Corrugator Belt Thickness 9mm Width range 1400mm - 3200mm Length 80 meters Heat-resistance 240�ºC (the kevlar edge upto 350�ºC) Tensile strength 70Mpa Coefficient of friction 0.40µ Weight per unit (7.5±0.3)kg/m2 Air-permeability 40mm water Column 2.0m³/m2/min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm -400mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt,Bottom belt,Upper belt ,Lower belt
Needle corrugator belt is producted by professional needle machine with advanced technic. According to the requirement of corrugated paper board production line, the corrugator belt is made of high grade pet fiber & nomex fiber to meet the high temperature and high stength and each belt must be heat-setting and chemical treatment to guarantees the stabily size. Property : High temperature resistance Aging resistance Even surface Stable size Long life time Specification: Material: 100%pet Manufacturing process: needle Thickness:7-10mm Width: 1.4m-3.0m Heat resistance:200
Nonwoven corrugating belt with teflon Nowoven corrugating belt with teflon gives the belt better resistance to tension. It is a modern belt for high speed machines of a new generation. Its high permeability enhances the atness and quality of board. Its reinforced pattern allows a very good life on machine. The lf (low friction) nishing was developed for shoe press applications and lower energy consumption. Nowoven corrugating belt with teflon features 1.High temperature resistance 2.Aging resistance 3.Even surface 4.Stable size 5.Long life time 6.Can produce belts at customers` requests
High speed corrugation belt High speed corrugation beltis made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability.High speed corrugation belt are special use in the heating and tracking section all kinds famous corrugators. Include bhs / agnati / mhi / mit / marouip / tcy / isowa and more china corrugator machine. Material: 100%pet Manufacturing process: woven Thickness:7-10mm Width: 1.4m-3.2m Heat resistance:200
Normal edge corrugator belt Normal edge corrugator belt made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability. Features Suitable for averange liner machine speed Longlife time running Suitable as a top and bottom belt Specifications: Material: synthetic aterial Thickness:9 mm Wdith range:1000mm - 3200mm Heatresistance:220 Weight:7.5kg/ Suitable speed:250m/min Seam:hot jaw lacing with flocking fastener clipper withrubber Widely used for heavy board and double wall
