Rebar threading machine Rolling screw on rebars and join with couplers New technology compared with welding and binding Nylon bag and wooden pallets. Goods also could be packaged as you required.
1.Adopt thread cold rolling technology, no cutting of rebar parent metal, the strength of threaded end is higher than its parent metal. 2.With spiral lead angle technology, easy to roll thread and ensure higher thread accuracy. 3.Rib peeling device adopts automatic opening-closing mechanism. With high efficiency, need only 20 seconds to finish a threaded end. 4.Be able to process rebar sizes 14-40mm, and max. thread length is 120mm for 16-32mm rebar, and 100mm length for 36-40mm rebar with 7.5kw electric motor. 5.The updated version of AGS-40C and AGS-40Z, the wheelbase and shaft diameter of reducer is bigger than AGS-40 and 40E, so that the machine length is longer than AGS-40C. 6.The height of electric motor and reducer is lower than before, so that it could reduce the center of gravity of the whole machine. 7. Equipped with air compressor. 8. There are 2 machine heads for AGS-50D, 1 is for 14-40mm, and the other for 50mm rebar screw.
Rebar fabrication equipment, bsts rebar thread cutting machine used for LINXION PI mechanical connection, best selled in India market. The advantages: 1.High efficency by manual operation of thread cutting; 2.Easy operate, no need to change other parts at same thread pitch, applied for 16-40mm all diameter deformed bars. 3.Easy and simple for working man
ebar thread rolling machine is developed according to the market demand. It is the key equipment to realize the splicing of reinforcing bars.It is mainly used for the processing of parallel thread head of ribbed reinforcing bars in bridge and reinforcing cage piling construction projects. It can process the ribbed bars from HRB335-HRB600 with diameter12-50 mm. The parallel thread rebars processed by the rolling machine will have good comprehensive mechanical properties with the continuous and compact metal fibers. Tensile Strength: increased by 20%-30%; Fatigue Strength: incread by 40%ï¼?60%, Corrosion Resistance: increased by 50%-200%; The strength of steel bar joints is higher than that of steel bar base materials. The mechanical properties of steel bar joints meet and exceed the domestic and international standards.
DBG-50 thread rolling machine is the key equipment to realize the splicing of reinforcing bars. It is mainly used for the processing of parallel thread head of ribbed reinforcing bars in bridge and reinforcing cage piling construction projects. It can process the ribbed bars from HRB335,HRB400,HRB500 and HRB600 with diameter12-50 mm. The max length can be 200mm.
DBG-40C thread rolling machine is the key equipment to realize the splicing of reinforcing bars.It is mainly used for the processing of parallel thread head of ribbed reinforcing bars in bridge and reinforcing cage piling construction projects. It can process the ribbed bars from HRB335,HRB400,HRB500 and HRB600 with diameter12-40mm. The max length can be 80mm.
Features 1. Hydraulic full-automatic, fast speed. 2. Cutting thread on forged bar with chaser, threading diameter 16-40mm(upsetting M20-M45mm). 3. Strength of the joint is higher than the rebar material. 4. Thread is full enough, max. threading length is 150mm. 6. Thread pitch is from 2.0 to 4.5mm with high accuracy.
Hebei Yida BTS-3 Rebar Parallel Thread Cutting Machine is used for thread cutting on the end of rebar after cold forging. Processing different diameter rebar, only chaser need to be changed, so it's very easy and simple for working man.
This machine is used to cut the thread for rebar end after cold forging.And it can also be used for thread rolling as well as bolt length above 500mm,unlimited length bolts. Parameter: Rebar diameter range: 16-40 Output speed Reducer:62r/min Electric motor power:5.5KW Water pump motor power: 0.15KW Cutting head movement distance:150mm Or unlimited Out dimension(mm):1700*1000*1400mm Weight:1200Kg
Steel Bar Rib Peeling and threading machine BGZL-4B2 1). the technical parameter for BGZL-4 steel bar rib peeling and threading machine The Machine Model BGZL-4B2 Machine Rolling Roller model E F G H Thread Pitch (mm) 2. 2.5 3. 3. Steel Bar Standard 16 18,2,22,25 28,32 36,4 The Whole Machine Weight 535Kg The Power of Main Electric Motor 5.5KW The Power Of Water Pump Electric Motor .75KW The Work Voltage 38V 5Hz 3Phase The Output Rotate Speed of Reducer 62 Dimension(mm) 1¨w18¨w1mm 2).The Capacity and Usage BGZL-4B2 steel bar straight screw thread processing rib peeling machine is the exclusive use rib peeling knurling machine for the straight screw thread connecting. It is mainly used in the processing of the top of the structural steel bar.
