1- liquid resin with polyurethane and acrylic 2- colorness and clear, one component, do not match any catalyst before fill 3- curing under sunshine or uv lamps 4- certificates: en 356 p3a p7b, en 12543-4, en 12600, en 1063 br6, sgs and msds 5- application: flat laminated glass, curved laminated glass, decorate glass, digital smart glass. 6- self-life: 18 month 7- sample: 2kg/pail 8- standard: 25kg/pail, 200kg/drum 9- payment: tt, lc, dp, western union, swift -
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
WE ARE SUPPLYING FROM INDIA AND FAR EAST
Polyurethane resin application 1)used in aviation, railways, construction, sports and other aspects; 2)surface varnish for wooden furniture and metal; 3)insulation for storage tanks, pipes, cold storage, beer, fermentation tanks, cold preservation barrels 4)waterproof for building insulation 5)used for prefabricated polyurethane sheet Ja202# polyurethane resin characteristics , , ¡ìoagood radiation resistance , yellow resistance and good hardness, it is very suitable for outdoor products , , ¡ìoagood resistant of uv and aging , , ¡ìoanon change hardness, not easy broken, no shrinkage and non deformation , and good adhensive , and good sunshine resistance for the long time using Polyurethane resin package 2kg/set or 10kg/set packing Polyurethane resin shelf life Six (6) months when stored under dry and cool place by original package under 25, æ
Polyurethane Adhesive · CRISTOFIX PU 9: Single component PU Adhesive.
Supplier: Pu foam scrap, memory/ visco foam scrap. rigid foam scrap, pvc foam scrap. pp non woven waste, pvc resin off grade/wet, abrasive garnet, epoxy resin, polyester yarn scrap, raw cotton scrap, quartz ore and sulphur
Services: Distributor of polyurethane trim foam scrap, sulphur, epoxy resin, polyester resin, quartz ore, recycled dacron and abrasive garnet.
Buyer: Pu foam scrap/waste. pu trim foam, polyurethane foam scrap, ldpe/hdpe/pp reprocessed granules, pvc offgrade/ reprocessed/regrind pp non woven scrap, abrasive garnet, quartz ore, sulphur, epoxy resin, polyester resin, and recycled dacron.
Our polyurethane adhesives are widely used in the bonding of product particles in the production process of shoe materials, cork, rubber mats, wine stoppers, recycled sponges and rubber racetracks.
Adhesive Resin For Sewrage And Drainage Pipe
Diameter:23mm-35mm Length:do as you Gelling time:8-50s
